Anleitung Samsung, modell CLX-8380ND
Hersteller: Samsung
Dateigröße: 11.71 mb
Dateiname: b4c44857-9ab9-4bc7-8249-c67ef3bfb24a.pdf
Unterrichtssprache:
|
 
|
|
|
Link zum kostenlosen Download Hinweise finden Sie am Ende der Seite
Dieses Gerät hat auch andere Anweisungen:
Anleitung Zusammenfassung
Do not press the guide too tightly to the edge of the paper; the guide may bend the paper. 3 After loading paper, set the paper type and size for the tray. See page 4.9 for copying and faxing or Software section for PCprinting. Note • Do not push the paper width guides far enough to cause the materials to warp. • If you do not adjust the paper width guides, it may cause paper jams. Note If you experience problems with paper feed, place one sheet at a time in the multi-purpose tray. 4.8 In the multi-purpose tray The multi-purpose tray can hold special sizes and types of print material, such as transparencies, postcards, note cards, and envelopes. It is useful for single page printing on letterhead or colored paper. Tips on using the multi-purpose tray • Load only one size of print media at a time in the multi-purpose tray. • To prevent paper jams, do not add paper when there is still paper in the multi-purpose tray. This also applies to other types of print media. • Print media should be loaded face down with the top edge going into the multi-purpose tray first and be placed in the center of the tray. • Always load only the specified print media to avoid paper jams and print quality problems. (Page 4.2) • Flatten any curl on postcards, envelopes, and labels before loading them into the multi-purpose tray. To load paper in the multi-purpose tray: 1 Open the multi-purpose tray and unfold the multi-purpose tray extension, as shown. 2 If you are using paper, flex or fan the edge of the paper stack to separate the pages before loading. For transparencies, hold them by the edges and avoid touching the print side. Oils from your fingers can cause print quality problems. 3 Load the paper with the side to be printed on facing down. Note Place the side to be printed facing down. Envelope Preprinted paper Transparency Punched paper Card stock Letterhead paper Label Banner paper Make sure you load one sheet at a time, and hold the paper with two hands for the paper not to fall since the paper length is longer than the multi-tray length. Squeeze the multi-purpose tray paper width guides and adjust them to the width of the paper. Do not force too much, or the paper will be bent, which will result in a paper jam or skew. 5 After loading paper, set the paper type and size for the multipurpose tray. See page 4.9 for copying and faxing or the Software section for PC-printing. Note The settings made from the printer driver override the settings on the control panel. 6 After printing, fold the multi-purpose tray extension and close the multi-purpose tray. Setting the paper size and type After loading paper in the paper tray, you need to set the paper size and type. These settings will apply to Copy and Fax modes. For PC-printing, you need to select the paper size and type in the application program you use on your PC. (See Software section.) 1 Press Machine Setup on the control panel. 2 Press Admin Setting. 3 When the login message appears, enter password with number keypad and press OK. (Page 3.5) 4 Press the General tab. 5 Press the down arrow to switch the screen, press Tray Management. 6 Select tray and its options such as paper size and type. 7 Press OK. Note If you want to use special sized paper such as a billing paper, select Custom in the Paper tab in the printer propeties. See Software section. 4.9 5 Copying This chapter gives you information about using your machine as a copy machine. This chapter includes: • Understanding the Copy screen • Copying originals • Changing the settings for each copy • Using special copy features Understanding the Copy screen When you press Copy on the Main screen, the Ready To Copy screen appears which has several tabs and lots of copying options. All the options are grouped by features so that you can configure your selections easily. If the screen displays an other menu, press ( ) to go to the Main screen. Basic tab • Original Size: Selects the size of the originals. (Page 5.2) • Reduce/Enlarge: Reduces or enlarges the size of a copied image. (Page 5.3) • Duplex: Sets the machine to print copies on both sides of the paper. (Page 5.3) • Output: Selects Collated or Uncollated copy options. If you install the optional stacker & stapler, then the staple related option appears. (Page 5.4) • Text, Text/Photo, Photo, Magazine: Improves the copy quality by selecting the document type for the current copy job. (Page 5.4) • Color, B/W, Auto: You can switch this mode among color, back/ white and automatic mode. Select whether the user print copies in mono or color. If you select the Auto mode, the machine detects the original document and decide the output is colored or not. In this case, the copying speed will be reduced. Note • When Auto mode is used, there maybe some orginals for which the mode is not correctly switched between in color and black/white. In this case, select Color or B/W manually as appropriate to the origi...
)
