Stimmen - 4, Durchschnittliche Bewertung: 4 ( )

Hersteller: BIXOLON Dateigröße: 949.65 kb Dateiname: srp350plusII_user_manual.pdf Unterrichtssprache:

This product should not be mixed with other commercial wastes for disposal. ¦ Label Material * Control Label: PC * Other Labels: PET Rev. 1.00 - 4 - SRP-350/352plusIIA&C ¦ Introduction The SRP-350/352plusII Roll Printer are designed for use with electronic instruments such as system ECR, POS, banking equipment, computer peripheral equipment, etc. The main features of the printer are as follows: 1. High speed printing : 59 (1/6” Feed) lines per second. 2. Low noise thermal printing. 3. The data buffer allows the unit to receive print data even during printing. 4. Peripheral units drive circuit enables control of external devices such as cash drawer. 5. Characters can be scaled up to 64 times compared to it’s original size. 6. Bar code printing is possible by using a bar code command. 7. Different print densities can be selected by DIP switches. Please be sure to read the instruction in this manual carefully before using your new SRP-350/352plusII. . NOTE The socket-outlet shall be near the equipment and it shall be easy accessible. . All specifications are subjected to change without notice. We at BIXOLON maintain ongoing efforts to enhance and upgrade the functions and quality of all our products. In following, product specifications and/or user manual content may be changed without prior notice. Rev. 1.00 - 5 - SRP-350/352plusIIA&C ¦ Table of Contents 1. Setting Up the Printer..................................................................................................7 1-1 Unpacking.................................................................................................................7 1-2 Connecting the Cables .............................................................................................8 1-2-1 Serial Interface (RS-232C) ...........................................................................8 1-2-2 Parallel Interface (IEEE1284) .......................................................................9 1-2-3 USB2.0 Interface ........................................................................................10 1-3 Connecting the Drawer...........................................................................................10 1-4 Setting the Dip Switches.........................................................................................11 1-4-1 Serial Interface (RS-232C) ......................................................................... 11 1-4-2 Parallel & USB2.0 Interface........................................................................11 1-4-3 Auto Cutter Enable / Disable selection .......................................................12 1-5 Setting the Memory Switches .................................................................................13 1-6 Installing or Replacing the Paper Roll.....................................................................16 1-7 Adjustments and Settings.......................................................................................18 1-8 Using the Printer.....................................................................................................18 1-9 Connecting the computer........................................................................................19 1-10 Connecting the Power Supply ..............................................................................19 2. Self test.......................................................................................................................20 3. Hexadecimal Dumping ..............................................................................................21 4. Specification ..............................................................................................................22 5. Appendix ....................................................................................................................23 5-1 Cleaning Printer......................................................................................................23 5-2 Using Wall Mount....................................................................................................23 Rev. 1.00 - 6 - Rev. 1.00 - 7 - SRP-350/352plusIIA&C 1. Setting Up the Printer 1-1 Unpacking Your printer box should include these items. If any items are damaged or missing, please contact your dealer for assistance. SRP-350/352plusIIC SRP-350/352plusIIA Cover Cable Roll Paper Manual AC Adapter Power Cord CD USB A-A CABLE SRP-350/352plusIIA&C 1-2 Connecting the Cables You can connect up the three cables to the printer. They all connect to the connector panel on the back of the printer, which is shown below: . NOTE Before connecting any of the cables, make sure that both the printer and the host are turned off. 1-2-1 Serial Interface (RS-232C) Interface connector Power supply connector . When the Dip Switch is “ON” on the Serial Interface Board, DTR and RTS are connected each other. Drawer kick-out connector PRINTER SIDE (25P) HOST SIDE (25P) PRINTER SIDE (25P) HOST SIDE (9P) P...

Herunterladen

Geben Sie zwei Ziffern: