Stimmen - 5, Durchschnittliche Bewertung: 4
(
)
)
|
Anleitung Zusammenfassung
All rights reserved. No part of this document may be reproduced or utilized in any form or by any means, electronic or mechanical, including photocopying, recording, or by any information storage and retrieval system, without permission in writing from Source Technologies, LLC. Published in the United States of America by: Source Technologies, LLC 2910 Whitehall Park Drive Charlotte, NC 28273 Author: Source Technologies, LLC Notice This manual serves as a reference for a Source Technologies Secure MICR Printer. This manual should be used as a reference for learning more about MICR technology and developing MICR printing applications. This guide was produced to assist IS Technicians and Engineers in the integration of Source Technologies’ programmed printers with their custom MICR applications. The guide also contains information on MICR related error messages that post to the operator panel. To the best of our knowledge, the information in this publication is accurate: however, neither Source Technologies, LLC, its dealers or affiliates assume any responsibility or liability for the accuracy or completeness of, or consequences arising from, such information. Changes, typos, and technical inaccuracies will be corrected in subsequent publications. This publication is subject to change without notice. The information and descriptions contained in this manual cannot be copied, disseminated, or distributed without the express written consent of Source Technologies, LLC. This document is intended for informational purposes only. Mention of trade names or commercial products does not constitute endorsement or recommendation for use by Source Technologies, LLC. Final determination of the suitability of any information or product for use contemplated by any user, and the manner of that use is the sole responsibility of the user. We recommend that anyone intending to rely on any recommendation of materials or procedures mentioned in this publication should satisfy himself as to such suitability, and that he can meet all applicable safety and health standards. All trade names or products used in this manual are for identification purposes only and may be trademarks or registered trademarks of their respective companies. Document Number: 104048 Revision: A Source Technologies, LLC ii ST9612 Secure MICR Printer User’s Guide Table of Contents Table of Contents 1. Printer and Driver Installation.......................................................................1 Driver Overview.................................................................................................2 Downloading the Universal Driver.....................................................................3 Unzipping the Driver..........................................................................................3 Installing the Driver............................................................................................4 Configure the Driver to enable MICR Mode ....................................................10 Configure the Driver to Recognize the Printer Secure Fonts...........................11 Configure another driver to print without MICR toner......................................11 Selecting the Printer........................................................................................14 2. MICR Overview.............................................................................................16 The Check Clearing System............................................................................16 MICR Printing Standards in the United States Today......................................16 3. MICR Check Design.....................................................................................18 General Features of Check Design.................................................................18 Position and Dimension Gauge.......................................................................18 Design Elements in Detail ...............................................................................18 Data Elements.................................................................................................19 4. Quality Issues...............................................................................................23 Printer Features ..............................................................................................23 MICR Toner.....................................................................................................23 MICR Check Stock..........................................................................................24 5. Security Issues.............................................................................................25 6. MICR Features..............................................................................................27 Secure MICR...................................................................................................27 MICR Fonts..................................