Stimmen - 3, Durchschnittliche Bewertung: 3.3
(
)
)
|
Anleitung Zusammenfassung
It also contains an overview of management and configuration tools, and instructions on upgrading software. The following printers are supported by the AXIS 1440 Print Server: • EPSON Stylus® Photo 700 • EPSON Stylus Photo EX • EPSON Stylus COLOR 740 • EPSON Stylus COLOR 850 Setup Overview 1. See your EPSON® documentation to set up the printer and install your printer software on each computer that will print over the network. 2. Attach the AXIS 1440 Print Server to your EPSON printer and connect it to the network. 3. Set up the AXIS 1440 Print Server for your network. 4. Install the AXIS software on server workstations, if setting up a shared printer. 5. Install the AXIS software on client workstations, if printing in peer-to-peer mode. 6. Configure each workstation’s printer port to use the AXIS 1440 Print Server. Notes: . For information about OS/2®, see Section 7 in the User’s Manual. . For information about UNIX®, see Section 8 in the User’s Manual. Physical Description Printer Connector Ethernet 10BaseT Test Button Connector Network Indicator Power Indicator External Power Supply Connector Hardware Installation Follow these steps to connect the AXIS 1440 to the printer and your network. 1. Locate the serial number on the bottom of the AXIS 1440 and write it down. You need this number during configuration. 2. Turn the printer off and connect the AXIS 1440 to the printer’s parallel port. 3. Connect the AXIS 1440 to the network using a twisted pair (10BaseT) cable. 4. Turn the printer on and connect the external power supply to the AXIS 1440. Check to make sure the network indicator is flashing. 5. Press the test button to print a test page. If the test page prints successfully, the AXIS 1440 is connected correctly to the printer. Software Installation AXIS Utilities disks 1 and 2 contain the following: •AXIS NetPilot™ • AXIS Print Utility for Windows (Windows 3.1 and Windows for Workgroups) • AXIS Print Monitor (Windows 95, Windows 98, and Windows NT) • AXIS MIB (Management Information Base) • AXIS Print Utility for OS/2 • axinstall script (UNIX) You install different programs, depending upon your network needs. For example, you must install AXIS Print Monitor and/or AXIS Print Utility for Windows if you have a NetBIOS/NetBEUI network. You’ll probably want to install AXIS NetPilot if you have a NetWare network. See the AXIS 1440 User’s Manual for more information. Notes: . Install your EPSON printer software and connect the AXIS 1440 to your printer and network before you begin this procedure. . Close all applications before you begin this procedure. To install the software for Windows 95, 98, or NT: 1. With Windows running, insert the AXIS Utilities disk 1 in your diskette drive. 2. Select Run from the Start menu, then type a:\windows\setup (where a is the letter of your diskette drive). Click OK. 3. Follow the instructions on screen. Choose Custom if you want to install AXIS NetPilot and AXIS Print Monitor; leave Typical selected if you only want to install AXIS Print Monitor. 4. When you see a message that the software has successfully installed, click Close. Important! . If the Installing AXIS Printer Ports wizard appears on your screen, close it. Do not try to install your printer this way. 5. Restart your system. To install the software for Windows 3.1 or 3.1x: 1. With Windows running, insert the AXIS Utilities disk 1 in your diskette drive. 2. Select Run from the Program Manager File menu, then type a:\windows\setup (where a is the letter of your diskette drive). Click OK. 3. Follow the instructions on screen. Choose Custom if you want to install both AXIS NetPilot and AXIS Print Utility for Windows; leave Typical selected if you only want to install AXIS Print Utility for Windows. 4. When you see a message that the software has installed successfully, click Close, then restart your system. Setting Up the AXIS 1440 on the Network The AXIS NetPilot Installation Wizard enables you to install and configure the AXIS 1440 for your network quickly and easily. You can use it to configure the print server for multiple network protocols: NetWare, NetBIOS/NetBEUI, TCP/IP, SNMP, and Apple EtherTalk. However, you must run it on a Windows workstation (or an OS/2 workstation in a Win OS/2 window) connected to a NetWare or NetBIOS/NetBEUI network. If your network only supports TCP/IP, you can use ARP, DHCP, RARP, or BOOTP to assign an IP (Internet) address. (See Section 3 in the AXIS 1440 User’s Manual for more information.) Then go to Setting Up Windows Workstations later in this guide to configure the printer ports for your Windows workstations. Notes: . You must already have installed AXIS NetPilot on you Windows workstation before you begin these procedures. . If you’re using AXIS NetPilot to set up the print server from a Windows NT workstation, your display should not be set to a generic video driver, such as VGA compatible. Before you start AXIS NetPilot, make sure your display is set to the exact video ...