If the Bath Seat is not properly assembled and adjusted, personal injury and damage to the Bath Seat could result. WARNING: If components are damaged or missing, contact your dealer immediately. DO NOT use substitute parts. Use only Lumex replacement parts. Non-Lumex replacement parts could cause personal injury and damage to the Bath Seat. WARNING: This product has a weight limit of 350 lb. WARNING: DO NOT use this product as a transfer bench or climbing device. WARNING: GF Health Products, Inc

Locate the four remaining screw knobs and curved washers. a. 7921R (with backrest): The screw knobs will attach the backrest and outer legs to the seat. Install curved washers on screw knobs. Lay seat upside down on flat surface as shown in figure 7. Lay backrest tubes on leg assembly, aligning holes. Insert screw knobs through backrest tube holes, through leg assembly holes, and into seat bottom. Secure by turning screw knobs clockwise; ensure screw knobs are tight without overtightening. b. 79

Los productos de Lumex son disenados y hechos a estandares precisos y son revisados cuidadosamente antes de envio. La Garantia Limitada de por Vida es un expresion de nuestro confianza en los materiales y factura de nuestros productos. Somos dedicados a proveer productos que pueden dar anos de servicio fiable a nuestros clientes. GF Health Products, Inc. garantia las partes especificos de estos modelos de Lumex escritos en el forro de este “hangtag” para la vida del producto sobre ser libre de d

WARNING: Make sure that all attaching hardware, screws, nuts and/or bolts are tight at all times. WARNING: Inspect rubber tips on the leg extensions for rips, tears, cracks or wear or if they are missing. Replace them IMMEDIATELY if any of these conditions exist. WARNING: The transfer bench seat MUST be installed before sitting on the transfer bench. WARNING: If components are damaged or missing, contact your GF Health Products Inc. distributor immediately. Transfer Bench Items 7927A and 7929 de

Secure the casters by inserting and tightening ^" screws into the pre-drilled pilot holes on the fittings with a Phillips screwdriver. Step 3 Insert the PVC back with mesh sling into the opening of the fittings. Secure the back with ^" screws. NOTE: Casters and PVC mesh back must be checked and secured prior to using the shower chair. Care Instructions: PVC Piping and Casters Wipe down piping with non-abrasive cleanser. DO NOT use solvents. Restore luster with Johnson's Pledge or similar

9. Place a washer and wing nut on the end of the long bolt that protrudes through the bottom of the toilet bowl. hardware 6482R-2 assembled 6482ER-2 assembled “R” on armrest socket locking button toilet seat riserarmrest right armrest shown installed (shown upside down) mounting holes 6482ER-2, one arm attached (shown upside down) boltwasherswingnut 6486R-2-INS-LAB-RevA11 10. Use a Phillips or blade screwdriver, whichever is appropriate, to turn the bolt clockwise until toilet seat riser and toi

If the toilet seat riser is not properly assembled and installed, personal injury and damage to the toilet seat riser could result. WARNING: If components are damaged or missing, contact your dealer immediately. DO NOT use substitute parts. Use only Lumex replacement parts. Non-Lumex replacement parts could cause personal injury and damage to the toilet seat riser. WARNING: This product has a weight limit of 300 lb. WARNING: GF Health Products, Inc. assumes no responsibility for any damage or in