Stimmen - 1, Durchschnittliche Bewertung: 4 ( )

Hersteller: Columbia House Dateigröße: 148.71 kb Dateiname: Unterrichtssprache:

Please take the time to read this informative instruction guide and pay particular attention to the safety instructions provided. Thank you again for choosing Columbia! Important Safety Instructions When using your Toilet Support, basic safety precautions should always be followed to reduce the risk of injury to persons. 1. Read and understand all instructions. 2. Determine, with a physician or therapist, the suitability of this support for the intended user. 3. Users with limited physical capabilities should be supervised or assisted when using this product. 4. Check that all locking knobs, buckles, and other parts are tight at all times. Save These Instructions Installing your Toilet Support Step 1: Remove your Toilet Seat Remove your toilet seat from your toilet bowl. This is done by unscrewing the nuts on the two bolts that hold your seat onto your toilet bowl. If the bolts are rusted, you may need to use new nuts and bolts when you replace your toilet seat. (See Fig. 1) Step 2: Mount the Base Plate Set the base plate directly on your toilet bowl, as in Figure 1, so the holes in the plate line up with those in your toilet bowl. Note: you have a choice of using the front or rear pair of holes in the plate. You may need to use the rear pair in order to clear the water tank on your toilet. Otherwise you may use your choice of holes, to position the support more forward or rearward, depending on the seat depth that would be most comfortable for the user of the support. Replace your toilet seat, on top of the base plate, so the two bolts you removed in Step 1 go through the holes in the plate as well as into the holes in your toilet bowl. Tighten the nuts firmly on the two bolts. C0420-00-01 1 Updated: 8/23/07 #4200-4900 Toilet Support Instructions Rev. B Step 3: Attach the Support Back For use, slide the support back over the two upright posts on the base plate. When the back height is where you would like it, tighten the plastic locking knobs. To open the safety buckle, squeeze the top and bottom tabs together. When not in use, remove the support back by loosening the plastic locking knobs and sliding the back off the posts. Cleaning Your Toilet Support Scouring powders (Ajax, Comet, etc.) are recommended for cleaning the chrome and metal ports of your support. Cleaning sprays and liquids are best for cleaning the plastic back. Always keep the chrome parts dry to prevent deterioration of the finish. Recommended Accessories Padded Toilet Seat Reducer Ring Models #4960, 4965 If you have a slender or young child who may require extended toileting time, our Padded Toilet Seat Reducer Ring offers comfort and non-slip security. The padded reducer has a large abductor/splashguard that is padded and removable. The pad...

Herunterladen

Geben Sie zwei Ziffern: