Stimmen - 4, Durchschnittliche Bewertung: 4
(
)
)
|
Anleitung Zusammenfassung
This smoke alarm is also interconnectable with up to 11 other units. Important information about your smoke alarm € Install alarms outside of every bedroom area and on every floor of your home. Please refer to Section 3 •Where to Locate Smoke AlarmsZfor details. € Install the alarm as close as possible to the center of the ceiling. € Your Smoke Alarm is packaged with the back-up battery reversed. Connect it before mounting the unit. Ensure proper polarity of the battery. Alarm will •beepZif battery is reversed and the unit is receiving AC power. € Replace the back-up battery if the smoke alarm beeps approximately once every 45 seconds (low battery warning). € Test the alarm weekly by pressing and holding the test button for up to 20 seconds until the alarm sounds. € The model described in this manual is designed for single family residences, including homes and apartments. SA379 Smoke Alarm Safety Features €Battery Back-Up - 120VAC operation with battery back-up (included) to power your smoke alarm in the event of a power interruption. €Alarm-Pause ® Silencer - Silence your alarm for approximately 10 minutes, by momentarily pressing the Alarm-Pause® Silencer button. Ideal for use when non-emergency smoke causes nuisance alarms. Automatically resets after 10 minutes. During Alarm-Pause® the unit will •beepZevery 45 seconds to remind the household that the alarm has been silenced. In the event of a heavy build-up of smoke during the pause period, the alarm will resume sounding. For interconnected units, only the alarm which had the Alarm-Pause® Silencer button activated will be in Alarm-Pause®. €Dual-Ionization Chambers - Advanced design responds to visible or invisible particles of combustion (smoke) to sense fires in their earliest stages. Compensates for changes in humidity and temperature to virtually eliminate •nuisanceZalarms caused by normal atmospheric changes in the home. €Operating Lights (LED• s) - A continuous green light located behind the slotted case indicates the smoke alarm is receiving AC power. A red light that flashes approximately every 45 seconds confirms that the battery is operational. € Low Battery W arning - If powered only by battery the unit •beepsZapproximately every 45 seconds for up to 30 days when the battery needs replacing. If the unit is receiving continuous AC power, the low battery beep will continue indefinitely. €Battery Removal Indication - Battery compartment drawer is designed to resist closing when the battery is removed. A visual reminder to replace the battery. Low battery warning beep is disabled with the drawer open. € Interconnection - Interconnection facilities for up to 11 other units, using only three wires, including AC power. When one alarm sounds, all properly interconnected smoke alarms follow. NOTE: Interconnect only to the models specified in Section 6. €Alarm Source Indicator - Only the red operating light in the unit originating the alarm will flash rapidly in the event of an alarm. With interconnected units, an easy check to determine the originator. € Locking Keys - Two auxiliary locking keys provided. Use key # 1 to lock mounting plate to smoke alarm. Use key # 2 to lock mounting plate and battery drawer to the smoke alarm to prevent opening of the battery drawer. Reduced risk of unauthorized removal. € Sensitivity T est Button - Tests sensitivity, as well as circuitry, battery and horn. With interconnected units, activating test button on one unit will cause all units to sound. An important and convenient check of system integrity. €Quick Disconnect Power Connection - For easy installation. Connect the wires separately from the unit and then plug into back of the unit. €Detachable Base Plate - For easily securing the alarm to the junction box. CONTENTS OF THIS MANUAL 1. CAPABILITIES AND LIMITATIONS OF SMOKE ALARMS 2. SAFETY TIPS 3. WHERE TO LOCATE SMOKE ALARMS 4. NFPA RECOMMENDATIONS 5. LOCATIONS TO AVOID 6. INSTALLATION AND TESTING 7. BATTERY REPLACEMENT 8. MAINTENANCE AND TROUBLESHOOTING 9. LIMITED WARRANTY 10. OTHER AMERICAN SENSORS PRODUCTS 1. CAPABILITIES AND LIMITATIONS OF SMOKE ALARMS American Sensors smoke alarms are designed to provide early warning of fire and smoke at reasonable cost. Early warning can mean the difference between a safe escape and no escape at all. While smoke alarms can provide invaluable protection for you and your family, they do have limitations. € Smoke alarms cannot work without power . Battery operated alarms will not work without proper batteries, with dead batteries or if batteries are not properly installed. AC powered alarms will not work if their AC power supply is cut off by an electrical fire, an open fuse, a circuit breaker or any other reason. If you are concerned about the reliability of either batteries or your AC power supply for any of the above reasons, you should install in your home both AC and battery powered smoke alarms for added security. This American Sensors Smoke Alarm model SA379 is AC pow...