Stimmen - 2, Durchschnittliche Bewertung: 4.5
(
)
)
|
Anleitung Zusammenfassung
This smoke alarm has the ability to function as a single unit or in an interconnected system. The Kidde 1275E features a red LED to display normal operation and identifies the origination unit in an interconnected system. The Kidde 1275E includes an Alarm Tamper Resist that inhibits unauthorized alarm and battery removal. The 1275E is interconnectable and includes a quick connect power harness that allows for quick and easy installation. Consumer Benefits The Kidde 1275E 120VAC powered ionization smoke alarm includes a 9V battery back up that provides continuous protection against smoke and fire hazards even during power outages. This unit includes a quick- connect power harness that makes installation fast and easy. The Kidde 1275E can be operated as a single station unit or it can be interconnected to up to 24 Kidde devices (of which 18 can be initiation), including smoke alarms, CO alarms and heat detectors, strobe lights and smoke and CO relay modules on one wiring system. Features and Benefits •Test Button – Tests unit’s electronic circuitry, horn, and battery function. •Quick Connector – Makes installation fast and easy. • Interconnectable – Interconnect up to 24 Kidde devices (of which 18 can be initiating) on one wiring network. • 9V Battery Backup – Provides protection during a power outage. • Alarm Memory – Helps deter alarm tampering and theft. •Tamper Resist Locking Pin – Provides a visual indication when an originating alarm has been activated. Test/Reset Button Tests smoke alarm circuitry and horn and resets alarm memory Red LED Flashes every 30-40 seconds to indicate that the smoke alarm is operating properly Green LED Indicates AC power is present 120VAC Smoke Alarm with Battery Backup • 1275E Description The Kidde 1275E is a 120VAC powered ionization smoke alarm with 9V battery back up. This smoke alarm has the ability to function as a single unit or in an interconnected system. The Kidde 1275E features a red LED to display normal operation and identifies the origination unit in an interconnected system. The Kidde 1275E includes an Alarm Tamper Resist that inhibits unauthorized alarm and battery removal. The 1275E is interconnectable and includes a quick connect power harness that allows for quick and easy installation. Consumer Benefits The Kidde 1275E 120VAC powered ionization smoke alarm includes a 9V battery back up that provides continuous protection against smoke and fire hazards even during power outages. This unit includes a quick- connect power harness that makes installation fast and easy. The Kidde 1275E can be operated as a single station unit or it can be interconnected to up to 24 Kidde devices (of which 18 can be initiation), including smoke alarms, CO alarms and heat detectors, strobe lights and smoke and CO relay modules on one wiring system. Features and Benefits •Test Button – Tests unit’s electronic circuitry, horn, and battery function. •Quick Connector – Makes installation fast and easy. • Interconnectable – Interconnect up to 24 Kidde devices (of which 18 can be initiating) on one wiring network. • 9V Battery Backup – Provides protection during a power outage. • Alarm Memory – Helps deter alarm tampering and theft. •Tamper Resist Locking Pin – Provides a visual indication when an originating alarm has been activated. Test/Reset Button Tests smoke alarm circuitry and horn and resets alarm memory Red LED Flashes every 30-40 seconds to indicate that the smoke alarm is operating properly Green LED Indicates AC power is present 120VAC Smoke Alarm with Battery Backup Unit Number 1275E 120VAC Smoke Alarm with Battery Backup Unit Number 1275E Architectural and Engineering Specifications The smoke alarm shall be Kidde Unit 1275 or approved equal. It shall be powered by a 120VAC, 60Hz, 80mA source along with a 9V battery backup. The unit shall incorporate an ionization sensor with nominal sensitivity of 1.26%ft. The temperature operation range shall be between 40°F and 100°F (4°C and 38°C) and the humidity operating range shall be 5% - 95% relative humidity. The smoke alarm can be installed on any standard single gang electrical box, up to a 4” octagon junction box. The electrical connection (to the alarm) shall be made with a plug-in connector. A maximum of 24 Kidde devices can be interconnected in a multiple station arrangement. The interconnect system must not exceed the NFPA (National Fire Protection Association) limit of 18 initiation devices, of which 12 can be smoke alarms. With 18 initiating devices (smoke, heat, CO, etc.), interconnected, it is still possible to interconnect 6 strobe lights and or relay modules. The unit shall provide optional tamper resistance that deters removal of the unit from the wall or ceiling. The alarm shall include a test button that will electronically simulate the presence of smoke and cause the unit to go into alarm. This sequence tests the unit’s electronics, battery and horn to ensure proper operation. The unit shall include a piezoelect...