Stimmen - 2, Durchschnittliche Bewertung: 4.5
(
)
)
|
Anleitung Zusammenfassung
This prevents the cover from closing when there is no battery fitted to the unit. When the battery is being installed or changed, this flag must be held down while gently pushing the battery into the battery holder. When the battery is first connected, the alarm may sound for 2-3 seconds - this is normal and means that the battery is connected correctly Interconnect up to 12 other alarms (9V ionisation, optical or heat) when one senses smoke, all alarm. Helps ensure warning will be heard throughout the house The smoke detector will activate the built in sounder upon sensing smoke particles The smoke detector will automatically reset itself and silence the sounder when smoke particles are no longer present in the sensing chamber The built in sounder will provide a minimum sound output of 85dB at 3m The smoke detector has a built in warning flag to prevent installation of the detector without a battery fitted The “Test” button will perform a self test and sound the horn (it may take up to 10 seconds) The smoke detector will emit a beep every 40 seconds to indicate that the battery back up is depleted and needs replacing Shannon Free Zone, Shannon, Co. Clare, Ireland. Ph.+353 61 471277 Fx.+353 61 471053 Email. eielectronics@eiltd.ie Web: E & OE As our policy is one of continuous product development, we reserve the right to alter product details without prior notice. Ei100C DataSht RevB Model Ei100C Ionisation Technical Specification Sensor Sensitivity: Source: Airspeed: Button Test: Supply Voltage: Ionisation, uses electrically Alarm: Piezoelectric-horn charged ions that will react to smoke particles in unit Alarm Sound Output: 85dB (minimum) at 3m Complies with BS 5446 Part 1: 2000 Temperature Range: 0 to 40°C Americium 241 Humidity Range: 0% to 90% Relative Humidity Essentially immune to the effect Fixing: Screw fixings supplied of airspeed. Plastic material: UL94HB flame retardant Simulates the effect of smoke and checks chamber, electronics and Dimensions: 140x120x45 mm horn. Weight: 174 gram 9V battery Warranty: 5 year (limited) warranty Approvals: Kitemarked to BS EN 14604:2005, CE Approved Specifications are subject to change Installation & Placement Important Precaution: Do not install the actual smoke/heat alarm itself in new or renovated buildings until all work is completed (including floor coverings) and the building has been fully cleaned. (Excessive dust and debris from building work can contaminate the smoke chamber and cause problems, and it will also invalidate the guarantee). If it must be installed, cover it completely, particularly around the edges, with a dust cover (eg. a plastic bag), until all cleaning is finished.. Alarms should be placed in accordance with the general guidelines shown in the diagram above. These recommendations are based on the problem of areas of “dead air” close to corners of rooms and apexes of ceilings, which could result in the prevention of smoke reaching the smoke detector Please consult the Instruction Leaflet supplied with the Ei100C for detailed instructions as to how to correctly install and position the smoke detector Shannon Free Zone, Shannon, Co. Clare, Ireland. Ph.+353 61 471277 Fx.+353 61 471053 Email. eielectronics@eiltd.ie Web: E & OE As our policy is one of continuous product development, we reserve the right to alter product details without prior notice. Ei100C D...