Stimmen - 4, Durchschnittliche Bewertung: 4
(
)
)
|
Anleitung Zusammenfassung
They provide up to six months of smoke alarm operation without mains power. The Ei161RC also has Remote Control capability -allowing the detector to be controlled remotely from a Control Switch (Ei1529RC). This then allows remote Test, Locate and Hush functions to be performed. If the Ei161RC is also interconnected to other Ei „RC. mains powered alarms, then the whole system can be controlled remotely. Up to twelve alarms can be interconnected which will cause all alarms to sound when one unit senses smoke/heat. A Manual Call Point (MCP401RC) is also available. The Ei161RC is supplied with the Easi-fit base that allows very quick and simple installation of the smoke alarm, combined with simple detector head removal and replacement. The Easi-fit base automatically connects both mains power and battery as the detector head slides on. The Ei161RC has other advanced features such as built in circuitry to aid suppression of both voltage transients and radio-frequency interference to further reduce the chances of false alarms. The green indicator will illuminate to show mains power is present The red indicator will flash every 40 seconds to show that the detector has performed an automatic self test The red indicator will flash rapidly to show an alarm condition for the smoke detector The “Test/Hush” button will either silence false alarms (if briefly pressed) or perform a smoke chamber test (if pressed and held) In “Test” mode the alarm will perform a smoke chamber test and sound the horn In “Hush” mode the alarm enters a ten-minute period of reduced sensitivity to overcome false alarm conditions. It will then automatically reset When interconnected to other Ei mains powered alarms, an alarm on one detector will trigger all other interconnected alarms (only the triggered alarm will flash a red indicator) The smoke alarm will emit a beep every 40 seconds to indicate that the battery back up is depleted and needs recharging Shannon Free Zone, Shannon, Co. Clare, Ireland. Ph.+353 61 471277 Fx.+353 61 471053 Email. eielectronics@eiltd.ie Web: E & OE As our policy is one of continuous product development, we reserve the right to alter product details without prior notice. Ei161RC DataSht RevB Model Ei161RC Ionisation Model Ei161RC Ionisation Technical Specification Sensor Ionisation Sensitivity: Complies with BS 5446 Part 1: 2000 Source: Americium 241 (33kBq) Button Test: Simulates the effect of smoke and checks electronics and horn Automatic Self-Test: Circuitry is tested every 40 seconds and unit beeps if fault is detected Supply Voltage: 230V AC, 50Hz Battery back up: Rechargeable Lithium cells Power-On Indicator: Continuous green LED Alarm: Electronic Piezoelectric horn Alarm Sound Output: 85dB(A) (minimum) at 3m Alarm Status: Red LED flashes every second on unit sensing fire System Wiring Normal Operating Temperature Range: Humidity Range: Interconnect: Optional Controls: Fixing: Plastic material: Dimensions: Weight: Guarantee: Approvals: 0 to 40°C 15% to 95% Relative Humidity Up to 12 of these units can be interconnected: -Ei161RC/164RC/166RC smoke or heat alarms -Ei261ENRC/261DENRC CO alarm -Ei128RBU relay base Use with optional control (see below) -Ei1529RC Control Switch -MCP401RC Manual Call Point Easi-fit mounting base UL94VO flame retardant 145mm diameter x 40mm depth 281g 5 year (limited) Kitemarked to BS EN 14604:2005 (License no. KM07862) and CE certified Specifications are subject to change Wiring for Interconnected Alarms with optional Remote System Control Switch & Manual Call Point Ensure correct wiring of the alarms and switches as mixing Live and Neutral will blow / damage interconnected units. Shannon Free Zone, Shannon, Co. Clare, Ireland. Ph.+353 61 471277 Fx.+353 61 471053 Email. eielectronics@eiltd.ie Web: E & OE As our policy is one of continuous product development, we reserve the right to alter product details without prior notice. Ei161RC DataSht RevB ...