Stimmen - 4, Durchschnittliche Bewertung: 3.3 ( )

Hersteller: Fisher & Paykel Dateigröße: 621.54 kb Dateiname: 75a0f7d5-ab6a-42c4-89c6-de76e3e9e44e.pdf Unterrichtssprache:

This happens even when HI-TEMP WASH option has not been selected. When HITEMP WASH is selected, an even higher temperature will be guaranteed to handle heavier soil loads. 4 Operating Instructions (continued) Cycle Chart Cycle To Select Cycle Water (approx.) Time* (min.) Washes/ Rinses For pots, pans, casseroles and dinnerware with dried-on or baked-on soils. Pots Pans Select POTS PANS and desired OPTIONS. HI-TEMP WASH and SANITIZE will automatically be provided. gal.8.5 105 2 washes 5 rinses For regularly soiled dishes and silverware. Normal Wash Select NORMAL WASH and desired OPTIONS. gal.6.1 85 2 washes 3 rinses For lightly soiled and pre-rinsed dishes and silverware. Light Wash (Both Racks) Select LIGHT WASH (BOTH RACKS) and desired OPTIONS. gal.4.9 75 1 wash 3 rinses For lightly soiled and pre-rinsed dishes and silverware when you do not have a full load. Light Wash (Upper Rack) Select LIGHT WASH (UPPER RACK) and desired OPTIONS. gal.3.7 65 1 wash 2 rinses Options Selections Hi-Temp Wash When HI-TEMP WASH option is selected, the dishwasher heats water in the main wash to approximately 140°F (60°C). This increase in water temperature helps dishwasher detergent remove food grease and soil from dishes more effectively and aids in drying. HI-TEMP WASH option can be used with all cycles. When HI-TEMP WASH option is selected, the light above the pad will come on and remain on until end of cycle. To turn off the HI-TEMP WASH option, press the pad a second time. The light above the pad will turn off. Sanitize Option To sanitize your dishes and glassware, select the SANITIZE option. When selected, the light above the pad will come on and remain on until end of cycle. The water temperature in the final rinse will be raised to 150°F (66°C) and will maintain that temperature for 9 minutes. This option is available in Pots Pans, Normal and Light (Both Racks) cycles. Only these sanitization cycles have been designed to meet NSF requirements. * Includes dry time. The cycle time will be extended until the proper water temperature is reached.Washing action will continue during the water heating delay. For best results, the incoming water temperature should be at least 120°F (49°C). The sanitize criteria may not be satisfied if there is an interruption of the cycle, power failure, or if the incoming water temperature is below 120°F (49°C). To turn off the SANITIZE option, press the pad a second time. The light above the pad will turn off. Heat Dry/No Heat Dry Option HEAT DRY OFF option saves electricity since the heating element is off during drying portion of cycle. When selected, the light above the pad will come on and remain on until end of cycle. To speed the drying process, open the door slightly after the cycle is complete. Some water droplets may remain on door and tub and in areas where dishes touch silverware basket and rack. 5 Operating Instructions (continued) To select heated dry, press the pad a second time. The light above the pad will turn off. Heated dry provides faster drying since the heating element is on during the drying portion of the cycle. You may see water vapor coming from vent during the drying portion of cycle. The vent is closed during washing to hold moisture and sound inside. The vent opens during the last few minutes of the final rinse and remains open for drying. The drying option may be changed at any time during the cycle and affects only the drying period. Opening the door longer than one minute during the dry cycle cancels the selected dry program. Delay Start The DELAY START option allows you to delay starting your dishwasher up to 6 hours. Press the pad once for a 2-hour delay, twice for 4 hours or three times for 6 hours. A light will come on indicating the delay start hours and will remain on until cycle starts.To cancel the DELAY START option and begin the cycle before the delay period is over, press the START/CANCEL pad. To Cancel a Cycle You can cancel a cycle anytime during the cycle. Press START/CANCEL pad and the dishwasher will start a 90 second drain. At the end of the drain, select the desired cycle. Status Indicator Lights The WASHING light comes on at the beginning of cycle and remains on until the end of the main wash. The DRYING light indicates the drying portion of the cycle. The light will come on when either drying option is selected. When the SANITIZE option is selected, the SANITIZED light will glow when the SANITIZE cycle is finished. If the dishwasher did not properly sanitize the dishes, the light will not come on. This can happen if the cycle is interrupted. The light will remain on until the door is opened. The CLEAN light will come on at end of cycle and remain on until door is opened. Child Lock Controls To prevent children from accidently changing the dishwasher cycle or starting the dishwasher, lock the dishwasher controls by pressing and releasing the HEAT DRY OFF pad, then pressing and holding the HEAT DRY OFF pad for 5 seconds. The CONTROLS light wi...

Herunterladen

Geben Sie zwei Ziffern: