|
Dieses Gerät hat auch andere Anweisungen:
Anleitung Zusammenfassung
a Warning – Risk of injury! Do not touch the blow opening 1R. The blow opening becomes hot and, furthermore, any damage will result in a chargeable callout by customer service. en Operating the appliance Switching on the appliance 1. Turn on the tap fully. 2. Switch on ON/OFF switch (. The Eco 50° programme display flashes. This programme remains selected if no other programme button 0 is pressed. The expected programme duration flashes on the digital display )*. 3. Press the START button h. The programme starts running. Note -for environmentally friendly operation of the dishwasher: For ecological reasons the Eco 50° programme is preset whenever the appliance starts. This conserves environmental resources and not least saves you money. The Eco 50° programme is a particularly environmentally friendly programme. According to EU regulation 1016/2010 it is the “Standard programme” which is the most efficient standard cleaning cycle for cleaning normally soiled utensils in terms of the combined energy and water consumption for cleaning these types of utensils. Programme sequence indicator )" Your dishes are being -/, cleaned. 5/% Your dishes are being rinsed. Your dishes are being dried. =/< Remaining running time display When the programme is selected, the remaining running time of the programme is indicated on the digital display )*. The running time is determined during the programme by the water temperature, the number of utensils as well as the degree of soiling and may vary (depending on the selected programme). Timer programming * * depending on model You can delay the start of the programme in 1-hour steps up to 24 hours. 1. Close the door. 2. Switch on ON/OFF switch (. 3. Press button X + until the digital display )* jumps to oe:‹‚. 4. Press X + or – button until the displayed time corresponds with your requirements. 5. Press START button h, timer programming is activated. 6. To delete timer programming, press the X + or – button until )* oe:‹‹ is indicated on the digital display. You can change your programme selection at any time until the programme starts. End of programme The programme has ended when the value ‹:‹‹ is indicated on the numerical display )*. Operating the appliance en Automatic switch off after end of programme or interior light* * depending on model To save energy, the dishwasher can be automatically switched off 1 min or 120 min after the programme ends. The setting can be selected from .:‹‹ to .:‹.. .:‹‹ Appliance does not switch off automatically. The interior light 1" comes on when the door is opened irrespective of whether the ON/OFF switch ( is switched on or off. When the door is closed the light is off. If the door is open for longer than 60 min., the light switches off automatically. The interior light 1" is lit only when the set value .:‹‹ is selected. .:‹‚ Appliance switches off after 1 min. .:‹. Appliance switches off after 120 min. 1. Close the door. 2. Switch on ON/OFF switch (. 3. Hold down programme button...
Dieses Handbuch ist für folgende Modelle:Geräte - SN26M297EU/32 (3.51 mb)
Geräte - SN26M297EU/43 (3.51 mb)
Geräte - SN26M297EU/44 (3.51 mb)
Geräte - SN26M297EU/51 (3.51 mb)