Stimmen - 0, Durchschnittliche Bewertung: 0 ( )

Hersteller: Bosch Dateigröße: 10.18 mb Dateiname: Unterrichtssprache:

If you used the sanitize option in your last cycle, the dishwasher will default to Auto Wash with the Sanitize option selected when you turn it on. Wash Cycle Information Note: To save energy, this dishwasher has a “Smart Control” where the sensors in the dishwasher automatically adjust the cycle length, temperature and water changes based on the amount of food soil and the incoming water temperature. The “Smart Control” makes decisions that can cause the cycle time and water usage to adjust intermittently. Wash cycle times are based on 120°F water supply. If your household water supply is different than 120°F, your dishwasher’s cycle times may be impacted. Table 2 - Wash Cycle Information Heavy Wash Auto Wash Normal Wash Delicate Wash Express Wash Half Load cycle time 130 min 105-119 min 95-115 min 80 min 30 min 99-110 min cycle time with Sanitize 150 min 125-140 min 120-140 min not available not available 120-130 min water consumption 25.6 L 6.8 gal 13.6-22.6 L 3.6-6 gal 8.7-19.5 L 2.3-5.2 gal 11.3 L 3 gal 11.3 L 3 gal 10.5-15.9 L 2.8-4.2 gal wash temperature 71°C 160°F 55-66°C 130-150°F 50-55°C 122-131°F 50°C 122°F 45°C 113°F 55-66°C 130-150°F rinse temperature 72°C 162°F 65-72°C 149-162°F 65-69°C 149-156°F 69°C 156°F 50°C 122°F 65-72°C 149-162°F Note: Only sanitizing cycles have been designed to meet the requirements of 6 for soil removal and sanitization efficacy. There is no intention, either directly or indirectly, that all cycles have passed sanitization performance tests. Operating the Dishwasher Start the dishwasher: 1 Open the door and press the On/Off button. 2 One of the wash cycle LEDs will be flashing. You can now select a wash cycle. 3 Press the Cycle Select arrow buttons to select the desired wash cycle. 4 Press Start and close the door to begin the cycle. Cancel a cycle: 1 Open the dishwasher door just far enough to expose the control panel. Be careful of hot water that may splash out. 2 Press and hold Start until the “Active” LED goes out. 3 Close the door and wait about 1 minute until the unit beeps, indicating it is done draining. 4 Open the door and press the On/Off button. You may now start a new cycle. WARNING You could be seriously scalded if you allow hot water to splash out of the dishwasher. OPEN THE DOOR CAREFULLY during any wash or rinse cycle. Do not fully open the door until water noises have stopped. To enter options mode: 1 With the door open, press the On/Off button to turn the unit on. 2 One of the wash cycle LEDs will be flashing. 3 Press and hold down the > button, then press and release the Start button. Now release the > button. 4 The “Clean” LED and one other LED will be flashing. You are now in options mode. 5 Press the > button to select the option you would like to adjust. To set amount of Rinse Aid: Note: If your glasses have spots on them, you need more rinse aid. If your glasses have streaks on them, you need less rinse aid. 1 Follow the prior instructions to enter options mode. 2 With the “Clean” an...

Herunterladen

Geben Sie zwei Ziffern: