Stimmen - 2, Durchschnittliche Bewertung: 4 ( )

Hersteller: Hobart Dateigröße: 832.57 kb Dateiname: Unterrichtssprache:

Flow Pressure 4.4 4.4 Rinse Consumption - Gallons per Hour - Maximum - at 20 lbs. Flow Pressure 42.9 48.1 Rinse Cycle - Gallons per Rack - at 20 PSI Flow .74 - 180°F Min. .74 - 140°F Min. Steam Booster, if used based on 20 PSI steam - 20 PSI water flowing 130°F entering water raised to 180°F min. (50°F rise) - Lbs. per Hour 40 40 Peak Rate of Drain Flow - Gallons per Minute (Initial rate with full tank) 14 14 Exhaust Requirements 450 450 Shipping Weight Crated - Approx. lbs. - Unit only, with booster 388 w/o Booster 418 w/Booster 388 AM SELECT TALL DISHWASHER AM SELECT TALL DISHWASHER 701 S Ridge Avenue, Troy, OH 45374 1-888-4HOBART • As continued product improvement is a policy of Hobart, specifications are subject to change without notice. Page 8 of 8 F-40079 – AM Select Tall Dishwasher The microcomputer-based control system is built into the AM Select dishwasher. It is available in standard electrical specifications of 208-240/60/1, 208-240/60/3, 480/60/3, 200-240/50/3, 380-415/50/3 and is equipped with a reduced voltage pilot circuit transformer. *CAUTION: CERTAIN MATERIALS, INCLUDING SILVER, ALUMINUM AND PEWTER ARE ATTACKED BY SODIUM HYPOCHLORITE (LIQUID BLEACH) IN THE CHEMICAL SANITIZING DISHWASHER MODE OF OPERATION. WATER HARDNESS MUST BE CONTROLLED TO 4-6 GRAINS FOR BEST RESULTS. CONSTRUCTION: Drawn tank, tank shelf and feet constructed of 16 gauge stainless steel. Wash chamber and front trim panel above motor compartment are polished, satin finish. Frame is 12 gauge stainless steel, chamber is 18 gauge, and removable trim panels are 20 gauge. CHAMBER: Stainless steel chamber with large 203.4" W x 27" H opening will accommodate 18" x 26" sheet pans or a 60-quart mixing bowl. CHAMBER LIFT: Chamber coupled by stainless steel handle, spring counterbalanced. Chamber guided for ease of operation and long life. PUMP: With stainless steel pump and impeller, integral with motor assures alignment and quiet operation. Pump shaft seal with stainless steel parts and a carbon ceramic sealing interface. Easily removable impeller housing permits ease of inspection. Capacity 160 GPM. Pump is completely self-draining. MOTOR: Built for Hobart, 2 H.P., with inherent thermal protection, grease-packed ball bearings, splash-proof design, ventilated. Single-phase is capacitor-start, induction-run type. Three-phase is squirrel-cage, induction type. MICROCOMPUTER CONTROL SYSTEM: Hobart micro- computer controls, assembled within water-resistant enclosure, provide built-in performance and reliability. The microcomputer control, relays and contactors are housed behind a stainless steel enclosure, hinged to provide easy access for servicing. The line voltage electrical components are completely wired with 105°C, 600V thermoplastic insulated wire with stranded conductors and routed thr...

Herunterladen

Geben Sie zwei Ziffern: