Stimmen - 2, Durchschnittliche Bewertung: 4 ( )

Hersteller: RCA Dateigröße: 1.68 mb Dateiname: Unterrichtssprache:

Suds may reduce washing performance and could cause the unit to leak. (Hand- Wash detergent is not allowed for this dishwasher.) USING YOUR DISHWASHER 2. Add detergent to the main wash compartment. (See the table for the amount of detergent.) NOTE Do not add detergent for a rinse cycle. 4.Close the cover. (You can hear cover latch click.) NOTE Too much detergent can leave a film on dishes. 14 U SING YOUR DISHWASHER When the lamp is on, it indicates the rinse-aid reservoir is almost empty. 2. Add a liquid rinse aid to the maximum level. (Max. 4.8 oz (145mL)) 3.Replace and lock the cap. 4. Rinse aid will be automatically dispensed during the final rinse cycle. ..Rinse Aid Amount Setting The factory setting is at level 3 which is where you can expect the best performance under a normal condition. After a cycle is done, if you notice some spots, streaks or water marks on the dishes, adjust to a higher setting. If you notice foam present on the bottom of the glasses or tub bottom, change to a lower setting. 1. Remove the cap. 2. Rotate adjuster to the desired setting. ....Refilling Rinse Aid 4.8 oz (145mL) is the capacity of the rinse aid dispenser. The refilling period totally depends on your washing habits such as the number of washes per month and which rinse aid setting you adjust to your washing conditions. The indicator light will inform you when there is insufficient rinse aid in the dispenser. The indicator light will stay on when you close the door to start a cycle. ....Black indicates sufficient Rinse Aid ....Clear indicates Rinse Aid required USING YOUR DISHWASHER Adding Rinse Aid to dispenser The purpose of rinse aids is to prevent possible spots on dishes formed from droplets during drying operation. By removing them, drying performance will be increased. NOTE Only liquid rinse aids can be used for this dishwasher. ..Filling Rinse Aid 1. Rotate the round cap counterclockwise and remove it. O PERATING SEQUENCE 16 1. Open the door and press the power button. Open the door. Press the power button to see the default setting. 2. Check rinse-aid. The indicator lights will illuminate if refilling is necessary. 3. Load the dishes after first removing any scraps of food. Remove any scraps of food in advance. Pull the lower rack out and load the dishes and cutlery in and push it all the way back. Pull the upper rack out and load the cups, glasses, etc. 4. Ensure that the spray arms can rotate freely. 5. Measure the detergent. Add the required amount of detergent into the dispenser. Close the detergent dispenser lid. 6. Setting the program. Select desired program and options. Before starting, the display window will show the estimated running time of the selected program. If the number of dishes only fill one rack, you can use the Half Load option. For example, if you load dishes only on the upper rack, you adjust the Half Load button to the upper rack. Remember to load all dishes into the selected rack. The estimated remaining time will be displayed. If the d...

Herunterladen

Geben Sie zwei Ziffern: