Stimmen - 4, Durchschnittliche Bewertung: 4
(
)
)
|
Anleitung Zusammenfassung
• First open the door slightly to reduce the risk of water spillage. • Press the Programme Selection button until the required Programme Indicator light is illuminated. • Then close the door. The dishwasher will begin the new programme from the point at which the old programme stopped. Cancelling a programme It is possible to cancel the programme once the programme has started. • First open the door slightly to reduce the risk of water spillage. • Press and hold the Programme Selection button for approximately three seconds, until the end of Programme Indicator light flashes and the Programme Indicator light switches off. • Then close the door. The dishwasher will drain for approximately thirty seconds. Once this is complete, the dishwasher will beep five times and the end of Programme Indicator light will switch on. Switching the dishwasher off • Once the dishwasher beeps five times, and the end of Programme Indicator light switches on, the dishwasher can be switched off by pressing the Power button. • Then turn off the water tap and remove the plug from the power socket. Please note: The dishwasher will automatically continue on the programme it has started if the door is opened or in the event of a power cut. Power button Programme Selection button Delay Timer button End of Programme Indicator light Starting a programme • PressthePowerbutton. • Press the Programme Selection button until the required programme light is illuminated. • If required, press the Delay Timer button. • Oncethepowerisswitchedon,theendofProgrammeIndicatorlightwillswitchon. • Onceaprogrammeisselected,theendofProgrammeIndicatorlightwillswitchoff,andtheProgrammeIndicatorlight will switch on. • Whenyouclosethedishwasherdoortheprogrammewillstartautomatically. Please note: The dishwasher stores the most recently used programme in its memory. To change the programme, simply press the Programme Selection button . At the end of a programme Ifpossible,donotopenthedishwasherdooroncetheprogrammehasstarted. Attheendoftheprogramme,thedishwasherwillbeepfivetimes,andtheendofProgrammeIndicatorlightwillswitchon. Changing a programme It is possible to change the programme if necessary once the programme has started. • First open the door slightly to reduce the risk of water spillage. • Press the Programme Selection button until the required Programme Indicator light is illuminated. • Then close the door. The dishwasher will begin the new programme from the point at which the old programme stopped. Cancelling a programme It is possible to cancel the programme once the programme has started. • First open the door slightly to reduce the risk of water spillage. • Press and hold the Programme Selection button for approximately three seconds, until the end of Programme Indicator light flashes and the Programme Indicator light switches off. • Then close the door. The dishwasher will drain for approximately thirty seconds. Once this is complete, the dishwasher will beep five times and the end of Programme Indicator light will switch on. Switching the dishwasher off • Once the dishwasher beeps five times, and the end of Programme Indicator light switches on, the dishwasher can be switched off by pressing the Power button. • Then turn off the water tap and remove the plug from the power socket. Please note: The dishwasher will automatically continue on the programme it has started if the door is opened or in the event of a power cut. Power button Programme Selection button Delay Timer button End of Programme Indicator light Detergent To fill the detergent compartment 1. Push the latch to open the compartment. 2. Add the required amount of detergent. The main detergent compartment (b in figure 1) has lines to allow for specific amounts of detergent. These are marked at either 15 cm3 or 25 cm3, depending on how dirty the dishes are. If your dishes are in need of an intensive wash, then add 5 cm3 of detergent into the prewash section of the compartment (a in figure 1). 3. Then close the detergent compartment lid until the latch locks. Please note: You should only use detergents designed specifically for use in dishwashers. If using dishwasher tablets, always use the detergent compartment, do not put them in the main body of the dishwasher or in the cutlery basket. The solubility of dishwasher tablets can vary depending on the temperature and duration of the programme. As a result, it is recommended that powder detergents should be used in the shorter programmes to allow better performance. CDA recommends the use of separate detergent, rinse aid and dishwasher salt rather than combination tablets as separates achieve better wash performance. If you do use combination detergents, add salt and rinse aid to the dishwasher and then adjust the water hardness setting and rinse aid setting to the minimum. When you then use separate detergents again, you should fill the salt and rinse aid compartments, adjust the water hardness setting to the maximum and run an empty wash...
Dieses Handbuch ist für folgende Modelle:Geräte - WC140 (2.01 mb)
Geräte - WC140 (2.01 mb)