|
Anleitung Zusammenfassung
This will release any accumulated hydrogen gas. Since the gas is flammable, do not smoke or use an open flame during this time. L) Remove the door to the washer compartment when removing an old dishwasher from service or discarding it. 3 TECHNICAL SPECIFICATIONS & PARTS LIST Specifications Models:....................................PLS 600/600NF/602S/602NF Power Supply: .....................................120V~60Hz, 10 Amp Heater:.................................................1200-1400W Circulating Pump: ..............................................170W Discharge Pump: ...............................................65W Consumption: ...............................0.7 kwh for heavy wash cycle Water Consumption: . .4.75 U.S. gallons (4 IMPERIAL gallons) for heavy wash cycle ..................3.56 U.S. gallons (3 IMPERIAL gallons) for normal wash cycle Water-lnlet Hose:........................................7ft. (^"fitting) Water Outlet Hose:..........................................7ft. length Power Cord:...............................................5ft. length Net Weight:..................................................46 Lbs Dimensions:.................................191/2nH x ^93U"\N x 193/4"D Diagram 1. Safety switch 2. Rinse aid container 3. Rinse aid dispenser 4. Water inlet 5. Drain filter 6. Upper spray arm (PLS 602S & PLS 602NF only) 7. Steam vent 7a. Lower spray arm 8. Control knob 9. Fast wash button 10. Temperature select button 11. Low heat indicator 12. High heat indicator 13. Fast wash indicator (PLS 600NF/602NF), Temp, boost indicator (PLS 600/602S) Accessories Owners Manual Double-level rack Silverware basket Water inlet hose Water outlet hose(attached to machine) Faucet Adapter U-Connector (for drain hose) Plate holders (2) - For model PLS 600/NF only Water Outlet Hose Hose Power 4 INSTALLATION Position of the Dishwasher The dishwasher can be placed on the counter, or it can be built-in under a counter. Do not place any objects on the door when it is open. This will cause the dishwasher to tip over or fall. Your dishwasher should be placed horizontally so the door opens downward and the dish rack can roll out smoothly. Built-in installation Water Hoses Your dishwasher can use water directly from your faucet or it can be built-in under a counter. When installing the dishwasher as a built-in unit there should always be a valve between the water source and the dishwasher. Attach the straight end of the water inlet hose to the sink faucet. Flush Hose- Before attaching the water inlet hose to the machine let the tap water flow momentarily in order to clear the hose of any debris that may have collected during shipping. Attach the angled end of the water inlet hose to the connection at the back of the dishwasher. Tighten the connection by hand. If the connection leaks, use a wrench to completely tighten the connections. Be sure not to over-tighten! 5 Faucet Adaptor If your si...
Dieses Handbuch ist für folgende Modelle:Geräte - PLS 600 V (3.48 mb)
Geräte - PLS 602 NFV (3.48 mb)
Geräte - PLS 602 SV (3.48 mb)
Geräte - PLS 600 V (3.48 mb)