Stimmen - 1, Durchschnittliche Bewertung: 5
(
)
)
|
Anleitung Zusammenfassung
Indicator lights Salt 1) Comes on when the special salt has run out. Rinse aid 1) Comes on when the rinse aid has run out. Indicator lights Multi tab Indicates the activation/ deactivation of the Multi tab function (See 'Multi tab function'). 1) The salt and rinse aid indicator lights are never on while a washing programme is running even if filling with salt and/or rinse aid is necessary. 7 The digital display The digital display indicates: • The level of hardness to which the water softener is set, • The approximate remaining time of the running programme, • Activation/deactivation of the rinse aid dispenser (ONLY with Multi tab function active), • The end of a washing programme (the digital display shows zero), • The countdown of the delay start, • Fault codes concerning malfunction of the dishwasher, • Activation/deactivation of the audible signals. Function buttons (A, B, C, D and E) The following functions can be set using these buttons: • Setting the water softener level, • Cancelling a washing programme or a delay start in progress, • Activation/deactivation of the Multi tab function, • Activation/deactivation of the rinse aid dispenser when Multi tab function is active, • Activation/deactivation of the audible signals. Setting mode Press the On/Off button; if ALL programme button lights come on the appliance is in setting mode. Always remember that when performing the following operations: • Selecting a washing programme, • Setting the water softener, • Activating/deactivating the rinse aid dispenser, • Activating/deactivating the audible signals, the appliance MUST be in setting mode. Press the On/Off button; if a programme button light comes on the last performed or selected programme is still set. In this case, to return to setting mode, the programme has to be cancelled. To cancel a set programme or a programme in progress Simultaneously press and hold the two function buttons B and C until all the programme button lights come on. The programme has been cancelled and the appliance is now in setting mode. Audible signals Audible signals have been introduced to help indicate which operations the dishwasher is performing: – Setting of the water softener, – End of programme – Intervention of an alarm due to malfunction. Factory setting: audible signals activated. It is possible to deactivate the audible signals, using the function buttons on the control panel. 1. Press the On/Off button. The dishwasher must be in setting mode. 2. Simultaneously press and hold function buttons B and C, until the lights of function buttons A, B and C start flashing. 8 3. Press function button C, the lights of Audible signals activated function buttons A and B go off while the 4. To change the setting, press again function light of function button C continues to button C. Each time the button is pressed flash. The digital display shows the current the level changes, the digital display shows setting. the new setting. 5. To memorize the operation, switch off the Audible signals deactivated dishwasher by pressing the On/Off button. Washing programmes Programme Degree of soil 70° Intensive Heavy soil Automatic 1) Any 50° Economy 2) Normal soil Quick wash 3) Normal/light soil Rinse hold Any. Type of load Crockery, cutlery, pots and pans Crockery, cutlery, pots and pans Crockery and cutlery Crockery and cutlery Partial load (to be completed later in the day). Programme description Prewash Main wash 1 intermediate rinse Final rinse Drying Prewash Main wash 1 or 2 intermediate rinses Final rinse Drying Prewash Main wash 1 intermediate rinse Final rinse Drying Main wash Final rinse 1 cold rinse (to avoid food scraps from sticking). This programme does not require the use of detergent. 1) During the "Automatic" washing programme the level of soiling on the dishes is determined by how cloudy the water is. The programme duration, water and energy consumption levels can vary; this depends upon if the appliance is fully or partially loaded and if the dishes are lightly or heavily soiled. The temperature of the water is automatically adjusted between 45° C and 70° C. 2) Test programme for test institute. 3) Ideal for washing a partially loaded dishwasher. This is the perfect daily programme, made to meet the needs of a family of 4 persons who only wish to load breakfast and dinner crockery and cutlery. 9 Consumption values1) Programme 70° Intensive Automatic 50° Economy3) Quick wash Rinse hold Programme duration (in minutes)2) - - - - - Energy consumption (in kWh) 1,4 - 1,6 1,1 - 1,7 1,0 - 1,1 0,9 0,1 Water consumption (in litres) 16 - 18 12 - 23 12 - 13 9 4 1) The consumption values are intended as a guide and depends on the pressure and the temperature of the water and also by the variations of the power supply and the amount of dishes. 2) The digital display shows the programme duration. 3) Test programme for test institutes. When the dishwasher is first installed Before using your dishwasher for the first time: • Ensure that th...