Stimmen - 2, Durchschnittliche Bewertung: 3.5
(
)
)
|
Anleitung Zusammenfassung
electrical supply. Use copper wire only. A time-delay fuse or circuit breaker and separate circuit is recommended. If using a Hot Water Accessory Tank and/or a garbage disposer, a separate 120-volt, 60 Hz, AC-only, 15- or 20-amp fused electrical supply is required for each devise. Water: For dishwasher, a hot water line with 20-120 psi (138-827kPa) water pressure. Water temperature must be minimum 120°F (48.9°C) at dishwasher. Use 3/8" O.D. copper tubing with compression fitting is recommended. Use a 90° elbow with 3/8" N.P.T. external pipe threads on one end to connect to water inlet valve. Do not solder within 6" (15.2 cm) from water inlet valve. For sink faucet, hot and cold water line. Copper tubing with compression fitting for specific faucet to be installed. Drain: Separate drain P-traps for sink and dishwasher. DISHWASHER DRAIN OVERALL DIMENSIONS 1 SIDE 1-3/4" (4.4 cm) “to center of single hole faucet factory installed 19-3/8" (49.2 cm) maximum opened lid height water inlet valve 5-25/32" (14.7 cm) dishwasher drain (20.3 cm) I 22-1/32" (56.0 cm) 5-1/2 ft. (1.7 m) 3-prong ground-type power supply cord (between clamp rails) 22-1/32" (56.0 cm) to bottom of dishwasher drain z' back ■ A B C D 42" model 40-1/2" (102.9 cm) 16-7/8" (42.9 cm) 9-9/16" (24.3 cm) 39-11/16" (100.8 cm) 36" model 34-1/2" (87.6 cm) 10-7/8" (27.5 cm) 6-9/16" (16.6 cm) 33-11/16" (85.6 cm) If the dishwasher drain exits through the back wall, the centerline of the drain must be a minimum of 1/2" (1.3 cm) below the dishwasher drain. This is required to completely drain the dishwasher tub so that no standing water remains in tub. *NOTE: The cutout must be accurately cut to the dimensions shown within 1/16" (1.6 mm). Dishwasher top flange overlaps the countertop cutout by 7/16" (1.1 cm) on front and back edges and 1/4" (6.4 mm) on sides. • Cabinetry and countertop must be sturdy enough to support loaded dishwasher and sink (400 lbs. [181.4 kg]). air gaps Because Whirlpool Corporation policy includes a continuous commitment to improve our Dimensions are for planning purposes only. For complete details, see Installation Ref. 8564766 products, we reserve the right to change materials and specifications without notice. Instructions packed with product. Specifications subject to change without notice. 12-06-04...