Stimmen - 3, Durchschnittliche Bewertung: 4.3 ( )

Hersteller: John Deere Dateigröße: 79.6 kb Dateiname: Unterrichtssprache:

(112 kN) 18 Dimensions A Overall height to roof Overall height B Tread depth with single-bar grousers Tread depth with C Ground clearance to exhaust stack swamp shoes with grousers Moderate duty Extreme duty 850C LT ..........................124.0 in. (3151 mm) 124.8 in. (3170 mm) 2.6 in. (65 mm) 2.8 in. (72 mm) 16 in. (406 mm) 850C WT.........................124.0 in. (3151 mm) 124.8 in. (3170 mm) 2.6 in. (65 mm) 16 in. (406 mm) 850C WXLT .....................124.0 in. (3151 mm) 124.8 in. (3170 mm) 2.6 in. (65 mm) 16 in. (406 mm) 850C LGP........................124.0 in. (3151 mm) 124.8 in. (3170 mm) 2.6 in. (65 mm) 3.7 in. (93 mm) 16 in. (406 mm) D Blade width E Blade height F Blade lift height G Blade dig-H Blade tilt I Overall J Overall width ging depth (uses tilt jack) length with blade with blade angled 850C LT All-Hydraulic (PAT) Dozer ..............146.0 in. 48.3 in. 38.0 in. 33.4 in. 19.0 in. 203.1 in. 131.6 in. (3708 mm) (1227 mm) (962 mm) (849 mm) (482 mm) (5160 mm)** (3343 mm) Semi-U (High Production) ..............128.3 in. 56.5 in. 43.3 in. 20.2 in. 28.7 in. 207.1 in. N/A (3259 mm) (1435 mm) (1100 mm) (513 mm) (730 mm) (5262 mm)* *Optional extended drawbar adds 10.1 in. (253 mm). **Optional extended drawbar adds 8.9 in. (223 mm). 850C WT All-Hydraulic Dozer (PAT) ..............158.0 in. 48.3 in. 38.0 in. 33.4 in. 20.5 in. 203.1 in. 142.4 in. (4013 mm) (1227 mm) (962 mm) (849 mm) (522 mm) (5160 mm)** (3618 mm) Semi-U (High Production) ..............140.0 in. 56.5 in. 43.3 in. 20.2 in. 34.6 in. 207.1 in. N/A (3556 mm) (1435 mm) (1100 mm) (513 mm) (878 mm) (5262 mm)*** **Optional extended drawbar adds 8.9 in. (223 mm). ***Optional extended drawbar adds 7 in. (176 mm). 850C WXLT All-Hydraulic Dozer (PAT) ..............158.0 in. 48.3 in. 40.7 in. 35.2 in. 20.5 in. 218.5 in. 142.4 in. (4013 mm) (1227 mm) (1034 mm) (893 mm) (522 mm) (5553 mm)** (3618 mm) **Optional extended drawbar adds 8.9 in. (223 mm). 850C LGP Semi-U (Low Profile) and Straight blades available through Custom Engineering. All-Hydraulic (PAT) Dozer ..............168.0 in. 48.3 in. 40.7 in. 35.2 in. 21.8 in. 218.5 in. 152.0 in. (4267 mm) (1227 mm) (1034 mm) (893 mm) (554 mm) (5553 mm)** (3860 mm) / 144 in. (3658 mm)# Semi-U (High Production) ..............156.6 in. 43.8 in. 42.5 in. 16.9 in. 37.0 in. 222.5 in. N/A (3978 mm) (1113 mm) (1080 mm) (429 mm) (940 mm) (5651 mm)** **Optional extended drawbar adds 8.9 in. (223 mm). #With L/R angle cylinder pins removed at blade. K Blade angle L Cut reach M Width over track N Cast reach O Cutting edge angle 850C LT All-Hydraulic (PAT) Dozer ..............25 degrees 4.5 in. (113 m) 106 in. (2692 m) 21.2 in. (538 m) 60 degrees 850C WT All-Hydraulic (PAT) Dozer ..............25 degrees 3.9 in. (98 m) 118 in. (2997 m) 20.5 in. (523 m) 60 degrees 850C WXLT All-Hydraulic (PAT) Dozer ..............25 degrees 3.9 in. (98 m) 118 in. (2997 m) 20.5 in. (523 m) 60 degrees 850C LGP All-Hydraulic (PAT) Dozer ..............25 degrees 4.5 in. (113 mm) 126 in. (3200 mm) 21.2 in. (538 mm) 60 degrees Drawbar Pull 850C Maximum ........................................................................................72,000 lb. (320 kN) At 1.2 mph (1.9 km/h) .....................................................................35,200 lb. (156 kN) At 2.0 mph (3.2 km/h) .....................................................................25,300 lb. (112 kN) 19 DRAWBAR PULL X 1000 lb. (N) (kg) SPEED lb. 5 10 15 20 25 30 35 40 45 50 55 60 65 70 75 N 40 80 120 160 200 240 280 320 850C LT, WT, WXLT, and LGP km/h 0 2 4 6 8 10 12 mph 0 1 2 3 4 5 6 7 8 32 28 24 20 16 12 8 4 kg CRAWLER SPEED VS GROUND PULL Usable pull will depend on traction and weight of tractor. G Extended Drawbar I Standard Drawbar A B C E F O D H K Cast Reach Cut Reach Width Over Track M L N J 19 DRAWBAR PULL X 1000 lb. (N) (kg) SPEED lb. 5 10 15 20 25 30 35 40 45 50 55 60 65 70 75 N 40 80 120 160 200 240 280 320 850C LT, WT, WXLT, and LGP km/h 0 2 4 6 8 10 12 mph 0 1 2 3 4 5 6 7 8 32 28 24 20 16 12 8 4 kg CRAWLER SPEED VS GROUND PULL Usable pull will depend on traction and weight of tractor. G Extended Drawbar I Standard Drawbar A B C E F O D H K Cast Reach Cut Reach Width Over Track M L N J 850C Series II Dozer Key: Standard equipment Optional or special equipment See your John Deere dealer for further information. LT WT WXLT LGP Engine Air cleaner, dual-stage aspirated type Air cleaner restriction indicator Blower fan Coolant recovery tank Electric ether start aid Enclosed safety fan guard (conforms to SAE J1308) Engine coolant –34°F (–37°C) Oil-to-water engine oil cooler Precleaner Spin-on fuel filter Trash-resistant radiator Turbocharger Underhood muffler with vertical exhaust stack Water separator Engine coolant heater, 1,000 watts, 120 volts Prescreener guard Radiator sand screen Reversible fan Chrome exhaust stack Power Train Automatic applied, hydrostatic- released park brake, pedal operated Oil-to-air transmission cooler Dual-path hydrostatic tran...

Herunterladen

Geben Sie zwei Ziffern: