The Weatheradio receives these transmissions from up to 50 miles away. The Weatheradio sounds an alarm when a weather station broadcasts a special trigger alert signal indicating a weather emergency. Your Weatheradio includes the following features: Seven Channels (1-7) - let you choose the frequency that provides the best reception. Alert Mode - sounds the siren when it detects an emergency weather situation. Siren Test Button - lets you check the alert siren. Battery-Saving Circuit - minimizes

In this package you will find: One Five-Channel Remote Thermo-hygrometer (transmitter) (TS34C) One User Manual Standard Package Contents Picture Components Thermo Hygrometer Sensor Installation All data measured by this remote sensor is transmitted to the main unit wirelessly, with the operating range up to 328 feet (100 meters) in the open area. Remote thermo-hygrometers (temperature & humidity sensors) can be placed indoors or outdoors, depending on the area where the temperature and humidity

Most packages will include multiple 1-Wire Weather Sensors, an intermediate cable; a mast mounted junction box and Weather View 32 Software. This documentation will assume that you have purchased the complete package. The 1-Wire Weather Station™ has several unique qualities because it utilizes the Dallas Semiconductor 1-Wire Microlan™. The 1-wire system does not require external power supplies, all power is supplied by the PC RS-232 Port. All 1-Wire Weather Sensors are intelligent digital device

Simple, reliable, accurate…it allows you to monitor indoor conditions and read out- door temperatures from indoors,creating an all-in-one weather display. Plan your work day, play day, every day. Now that’s smart! Table of Contents Powering the WeatherGuide™................................................................2 How to Display the WeatherGuide™....................................................2 How to Read the WeatherGuide™ Temperature Readings .......................................

When the probe of the sensor is covered with water, the sensor will send a signal to one of the Skylink’s receivers (Security Control Panel SC-001, Emergency Dialer AD-433S, Audio Alarm AA-433, Silent Alarm SW-433) and these receivers will perform their tasks. You must program the sensor to these receivers before they can recognize each other. In this package, you should find a Flood Sensor (battery inside), double-sided foam tape and screws. 2 pcs 2.6 x 12 screws Flood Sensor 2 pcs 3.5 x 20 scr

• Install 2 “ AA” size alkaline batteries (not included) matching the polarities shown in the battery compartment. • Replace the battery compartment door and secure the screws. • Secure remote sensor in the desired location. LOW BATTERY WARNING A low-battery indicator [ ] will appear on the remote temperature reading line of the main unit, warning that the remote sensor batteries need replacement. PLACEMENT OF THE REMOTE SENSOR The remote sensor can be mounted on the wall using the recessed scre