Stimmen - 3, Durchschnittliche Bewertung: 4
(
)
)
|
Anleitung Zusammenfassung
A maximum of 3 remote sensor units can be registered. One remote sensor is included.To purchase additional Remote Sensors (Taylor model 1534), please visit 5 How to Set the Clock Manually To manually set the clock: YourWeatherGuide™ has a 12 hour clock function.To set the clock: 1. Press and hold the “Set” button located on the back of the base unit. The hour digits will flash. 2. Press “+C/F” to change the hours. Press “SET” to enter. 3. Press “+C/F” to change the minutes. Press “SET” to enter. 4. Press “+C/F” to change the month. Press “SET” to enter. 5. Press“+C/F” to change the day.Press “SET” to enter. 6. Press “+C/F” to change the year. Press “SET” to enter. 7. The clock is now set. Tip:Hold down the “C/F” button to advance the digits quickly. Press and hold SET to start clock setting. Press +C/F to change time digits and then SET to enter. Repeat for all settings. Press SET after setting year. The clock is set. 6 How to Read Your WeatherGuide™ The base unit displays indoor conditions from its location. The remote unit will transmit weather readings from its location back to the base unit. Alternately, the remote sensor’s probe cord may be used. Plug the probe cord into the rubber plug on the remote sensor.Allow the end to hang where you wish to measure temperatures (out of a window, aquariums, swimming pools, etc.) Base unit – Indoor and Outdoor readings Remote unit – outdoor readings If more than one remote sensor is in use, press the “CHANNEL” button on the back of the base unit to toggle between sensor displays. Press Channel to see different remote sensor readings A Channel icon on the base unit indicates which remote sensor readings are dis- played. Channel icon indicates which channel is displayed. 7 Auto Scroll feature – the base unit can be set to automatically scroll through read- ings. To activate Auto Scroll, press the “Channel” button on the back of the base unit until the auto scroll symbol appears on the LCD. The base unit will automatically display base and remote readings for 10 Auto scroll will toggle betweenseconds each. different remote sensor readings Temperature/Indoor Humidity Readings IndoorTemperature OutdoorTemperature Indoor temperature readings – these are temperatures at the base unit’s loca- tion. Outdoor temperature readings – these are temperatures that are measured by the remote sensor. Indoor humidity readings – these are temperatures at the base unit’s location. Humidity display 8 To View Minimum/Maximum temperature / indoor humidity readings Your WeatherGuide™ will store the last recorded high and low temperatures and indoor humidity over a 24 hour period.The 24 hour period starts when the batteries are installed. 1. Press the “Min/Max” button once to see the highest temperature/indoor humidity of the day. 2. Press the “Min/Max” button again to see the lowest temperature/indoor humidity of the day. 3.Press the “Min/Max” button a third time to see current temperature/indoor humidity again. To Clear the minimum or maximum readings, press and hold the “Min/Max” button while those readings are on the screen.The reading will reset to the current temperature and indoor humidity. Current reading 9 Press MIN/MAX to see high and low daily temperature & humidity Minimum or Maximum readings Back to current readings Minimum or Maximum readings on screen Min/Max readings are cleared. Press and hold Min/Max to reset high/low temperature & indoor humidity when they are on the screen Temperature Trend Indicators Your WeatherGuide™ will indicate if temperatures are rising, falling, or steady. indicates Rising Temperatures readings (temperatures have gone up more than 2 degrees in an hour) indicates Steady Temperature readings indicates Falling Temperatures (tempera- tures have gone down more than 2 degrees in an hour) Indoor Humidity Trend Indicators Your WeatherGuide™ will indicate if indoor humidity levels are rising, falling, or steady. indicates Rising Indoor Humidity readings (humidity has gone up more than 2 degrees in an hour) indicates Steady Indoor Humidity readings indicates Falling Indoor Humidity (humid- ity has gone down more than 2 degrees in an hour) 10 Backlight Feature The base unit has a backlight for easy viewing of the screen. Press the “Light” button to turn the backlight on for 3 seconds. Press LIGHT for a 3 second backlight To Switch Between °F and °C Press the “+C/F” button to switch between Fahrenheit and Celsius temperature dis- plays. Low Battery Indicator A on the LCD indicates the batteries are running low and should soon be replaced. -A by the indoor temperature display indicates the base unit bat- teries are low. -A by the outdoor temperature display indicates the remote bat- teries are low. Base unit batteries low Remote sensor batteries low 1 111 11 Trouble-Shooting Disconnected Signals If the receiver unit does not receive a transmission from a remote chan- nel for 1 hour, the display will show dashes.To correct this problem: 1. C...