Stimmen - 0, Durchschnittliche Bewertung: 0
(
)
)
|
Anleitung Zusammenfassung
Dry with a soft cloth. Oven interior Clean with hot water or vinegar solution. For heavy soiling: Only use oven cleaner on cold surfaces. Glass cover on the Clean with some washing-up liquid and a damp cloth. Dry with a soft cloth. oven light Accessories Soak in hot soapy water. Clean with a brush or a sponge. Aluminium baking Do not clean in the dishwasher. Never use oven cleaner. To avoid scratches, never touch the metal surtray (option) faces with a knife or similar sharp object. Wipe the surfaces horizontally and without applying pressure with soapy water and a soft window cloth or a lint-free microfibre cloth. Dry with a soft cloth. Do not use any abrasive materials, scouring sponges or rough cleaning cloths. They could scratch the baking tray Childproof lock If a childproof lock has been fitted on the oven door, it must be removed before cleaning. Soak all plastic (option) parts in hot soapy water and wash with a sponge. Dry with a soft cloth. If very dirty, the childproof lock will not work properly. Plinth drawer Clean with some washing-up liquid and a damp cloth. Dry with a soft cloth. (option) Accessories Soak in hot soapy water. Clean with a brush or sponge. Detaching and refitting the rails The rails can be removed for cleaning. The oven must have cooled down. Detaching the rails 1. Lift up the front of the rail 2. and unhook it (figure A). 3. Then pull the whole rail forward 4. and remove it (Fig. B). .................... Clean the rails with cleaning agent and a sponge. For stubborn deposits of dirt, use a brush. Refitting the rails 1. First insert the rail into the rear socket, press it to the back slightly (figure A), 2. and then hook it into the front socket (figure B). .... The rails fit both the left and right sides. Ensure that, as shown in figure B, levels 1 and 2 are below and levels 3, 4 and 5 are above. Detaching and attaching the oven door For cleaning purposes and to remove the door panels, you can detach the oven door. The oven door hinges each have a locking lever. When the locking levers are closed (figure A), the oven door is secured in place. It cannot be detached. When the locking levers are open in order to detach the oven door (Fig. B), the hinges are locked. They cannot snap shut. $ % : Risk of injury! Whenever the hinges are not locked, they snap shut with great force. Ensure that the locking levers are always fully closed or, when detaching the oven door, fully open. Detaching the door 1. Open the oven door fully. 2. Fold up the two locking levers on the left and right (figure A). 3. Close the oven door as far as the limit stop. With both hands, grip the door on the left and right-hand sides. Close the door a little further and pull it out (figure B). $ % Attaching the door Fitting Reattach the oven door in the reverse sequence to removal. 1. Hold the top glass panel firmly by the sides and slide it in towards the back at an angle. The panel must be inserted 1. When attaching the oven door, ensure that both hinges are into the openings on the lower side. The smooth surface must inserted straight into the opening (figure A). face outwards, while the roughened side must be on the 2. The notch on the hinge must engage on both sides (figure B). inside. (Fig. A). .. .... 3. Fold back both locking levers (figure C). Close the oven door. .. : Risk of injury! If the oven door falls out accidentally or a hinge snaps shut, do not reach into the hinge. Call the aftersales service. Removing and refitting the door panels The glass panels can be removed from the oven door to allow more thorough cleaning. Removal 1. Removing the oven door See the section Removing the oven door. Lay the oven door on a cloth with the handle facing downwards. 2. Remove the cover from the top of the oven door. To do this, press with your fingers on the left and right-hand side. Pull out the cover (Fig. A). 3. Raise the top panel and pull it out (Fig. B). .. .. Clean the panels with glass cleaner and a soft cloth. : Risk of injury! Scratched glass in the appliance door may develop into a crack. Do not use a glass scraper, sharp or abrasive cleaning aids or detergents. 2. Place the cover on the top of the oven door and press in place. Make sure that the grooves along the sides lock into position. 3. Refitting the oven door See the section Refitting the oven door. Do not use the oven again until the panels have been correctly fitted. Oven door - Additional safety precautions During long cooking times, the oven door may become very hot. If you have small children, extra supervision is required during oven operation. In addition, there is a protective device (protective grid) which prevents direct contact with the oven door. You can purchase this optional accessory (469088) from the after-sales service. Troubleshooting Malfunctions often have simple explanations. Refer to the table before calling the after-sales service as you may be able to remedy the fault yourself. Malfunction table If a dish doesn't turn ou...
Dieses Handbuch ist für folgende Modelle:Standbacköfen - HGG24W256M/01 (2.4 mb)