Stimmen - 0, Durchschnittliche Bewertung: 0
(
)
)
|
Dieses Gerät hat auch andere Anweisungen:
Anleitung Zusammenfassung
To activate 1. Select a hotplate. 2. Press the boost symbol. The › indicator lights up. The function should be activated. To deactivate 1. Selecting the hotplate. 2. Press the boost symbol. The › indicator will disappear and the hotplate will return to the power level S. The Powerboost function has been deactivated. Note: In certain circumstances, the Powerboost function may turn off automatically in order to protect the electronic components inside the hob. Time programming function This function may be used in two different ways: ¦ to automatically switch off a hotplate. ¦ as a timer. Turning off a hotplate automatically The zone turns off automatically once the selected time has elapsed. Programming the cooking time. The hob must be switched on: 1. Select the hotplate and the desired power level. 2. Press the 0 symbol. The x indicator on the hotplate lights up. ‹‹ lights up in the time program function display. 3. Within the next 10 seconds, slide a finger over the programming zone until the desired cooking time is reached. After a few seconds, the cooking time begins to elapse. Changing or cancelling the time Select the hotplate and then press the 0 symbol. Change the cooking time using the programming zone or set to ‹‹ in order to cancel the time. Once the time has elapsed The timer The hotplate switches off. A warning signal sounds. The time program function lights up ‹‹ for 10 seconds in the display. When the 0 symbol is pressed, the indications turn off and the beeping stops. Notes ¦ The faster you slide your finger across the programming zone, the faster the minutes on the indicator increase or decrease. The indicator is stopped by touching the programming zone with your finger. ¦ If cooking times have been programmed for various zones, the time program function always displays the time of the selected hotplate. ¦ Cooking times can be programmed for up to 99 minutes. The timer can be set for periods of up to 99 minutes. It is independent of the other settings. This function does not automatically switch off a hotplate. Programming 1. Press the 0 symbol several times until the W indicator lights up. ‹‹ lights up in the time program function display. 2. Select the desired time in the programming panel. The timer starts to count down after a few seconds. Changing or cancelling the time Press the 0 symbol several times until the W indicator lights up. Change the time with the programming zone, or set to ‹‹ . Once the time has elapsed A warning signal sounds. In the time program function display ‹‹ is shown, and the W indicator lights up. After 10 seconds the indicators turn off. When the 0 symbol is pressed, the indicators turn off and the beeping stops. Cleaning lock function Cleaning the control panel while the hob is switched on may change the settings. In order to avoid this, the hob has a cleaning lock function. Press the R symbol. A signal sounds. The control panel is locked for 30 seconds. The control panel surface can now be cleaned without the risk of changing the settings. Note: The lock does not affect the main switch. The hob may be switched off when desired. Basic settings The device has several basic settings. These settings may be adapted to the user's individual needs. Indicator Function ™ ‚ Childproof lock ‹ Deactivated. * ‚ Activated. ™ . Audible signals ‹ Confirmation and error signals deactivated. ‚ Only error signal activated. . Only confirmation signal activated. „ All signals activated. * ™ † Automatic time limitation. ‹ Basic setting: switch off after 1-10 hours. * ‚ The basic setting is halved: switch off after 0.5 - 5 hours. . The basic setting is quartered: switch off after 0.25 - 2.5 hours. ™ ‡ Duration of the time program function warning signal ‚ 10 seconds* . . 30 seconds. „ 1 minute. *Factory settings Indicator Function ™ . Power- Management function ‹ = Deactivated. * ‚ = 1,000 W. minimum power. ‚ = 1,500 W. . = 2,000 W. etc. S or S. = maximum power of the hob. ™ S Hotplate time selection ‹ Unlimited: the last hotplate programmed remains selected. * ‚ Limited: The hotplate will only remain selected for 10 seconds. ™ ‹ Return to basic settings ‹ Personal settings. * ‚ Return to factory settings. *Factory settings Accessing the basic settings 3. Press the @ symbol several times until the desired function indicator appears. The hob should be turned off. 4. Then select the desired setting with the programming zone. 1. Switch on the hob with the main switch. 2. Within the next 10 seconds, press and hold the @ symbol for 4 seconds. In the display, ™ and ‚ alternately light up and ‹ lights up as the default setting. 5. Press and hold the @ symbol again for more than 4seconds. The settings will have been correctly saved. Quit To leave the basic settings, turn off the hob at the main switch. Care and cleaning The advice and warnings contained in this section aim to guide you in cleaning and maintaining the hob, so that it is kept in the best possible condition Hob Cleaning Clea...
Dieses Handbuch ist für folgende Modelle:Standbacköfen - 3EB919MQ/01 (417.45 kb)