Stimmen - 0, Durchschnittliche Bewertung: 0
(
)
)
|
Dieses Gerät hat auch andere Anweisungen:
Anleitung Zusammenfassung
The panel must be inserted into the openings on the lower side. The smooth surface must face outwards, while the roughened side must be on the inside. ( Fig. A) . 2. Place the cover on the top of the oven door and press in : Risk of injury! place. Make sure that the grooves along the sides lock into If the oven door falls out accidentally or a hinge snaps shut, do position. not reach into the hinge. Call the aftersales service. 3. Refitting the oven door See the section Refitting the oven door. Do not use the oven again until the panels have been correctly fitted. Troubleshooting Malfunctions often have simple explanations. Refer to the table before calling the after- sales service as you may be able to remedy the fault yourself. Malfunction table If a dish doesn't turn out as well as you had hoped, refer to the section Tested for you in our cooking studio, where you will find plenty of cooking tips and tricks. Problem Possible cause Remedy/ information The oven does not work. The circuit breaker is defective. Look in the fuse box and check that the circuit breaker is in working order. Power cut Check whether the kitchen light or other kitchen appliances are working. Problem Possible cause Remedy/ information The oven does There is dust on Turn the control knobs back not heat up. the contacts. and forth several times. : Risk of electric shock! Incorrect repairs are dangerous. Repairs may only be carried out by one of our trained after-sales engineers. Replacing the bulb in the oven ceiling light If the bulb in the oven light fails, it must be replaced. Heat- resistant, 40 watt spare bulbs can be obtained from our after- sales service or a specialist retailer. Only use these bulbs. : Risk of electric shock! Switch off the circuit breaker in the fuse box. 1. Place a tea towel in the oven when it is cold to prevent damage. 2. Unscrew the glass cover by turning it anti- clockwise. 3. Replace the bulb with one of the same type. 4. Screw the glass cover back in. 5. Remove the tea towel and switch on the circuit breaker. Glass cover You must replace a damaged glass cover. Suitable glass covers may be obtained from the after-sales service. Please specify the E number and FD number of your appliance. After- sales service Our after-sales service is there for you if your appliance needs to be repaired. We will always find the right solution in order to avoid unnecessary visits from a service technician. E number and FD number When calling us, please give the product number ( E no. ) and the production number ( FD no. ) so that we can provide you with the correct advice. The rating plate containing these numbers is found on the side of the oven door. To save time, you can make a note of the number of your appliance and the telephone number of the after-sales service in the space below, should it be required. E no. FD no. After- sales service O Please note that there will be a fee for a visit by a servic...
Dieses Handbuch ist für folgende Modelle:Standbacköfen - HSE720120/46 (2.34 mb)
Standbacköfen - HSE720120/47 (2.34 mb)