Stimmen - 2, Durchschnittliche Bewertung: 4 ( )

Hersteller: Heartland Dateigröße: 153.79 kb Dateiname: Unterrichtssprache:

English Edition Note: If you plan to vent your exhaust hood to the outside, please refer to your range's Owner Installation and Operating Instructions under Exhaust Hood section before completing this installation. Note: maximum run of ducting is 25 linear feet (subtract 5' per 90 deg elbow added to the exhaust line and 2.5' per 45 deg elbow) Before proceeding, check for damage that may have occurred during shipping. If the contents are damaged, inform the freight company or your dealer immediately! Please refer to the "Installation and Operating Instructions" manual to complete your range installation © 2007 AGA-HEARTLAND #1719 TABLE OF CONTENTS 1. Removing Cabinet from Box ........................................................... 2 2. Assembly of Cresting panel ............................................................ 3 3. Installing Cabinets for Electric and Combination Stoves ............... 4 4.Installing Cabinets for Gas Stoves ................................................ 5 5. Installing Cabinet for Wood Stoves ................................................ 6 6. Venting .......................................................................................... 7 7. Connecting Power to the Cabinet for Electric and Combination Stoves ....................................................... 8 8.Connecting Power to the Cabinet for Gas Stoves .......................... 9 1 Please read through these instuctions before installing the cabinet on the stove base. TWO PEOPLE ARE REQUIRED TO DO THE INSTALLATION Cardboard corners Lift here Cardboard Cross brace Small boxcontains: - hardware package - deflector ( not included with woodstove cabinets.) - 3 1/2"x10 exhaust adapter ( not included with woodstove cabinets.) Cresting panel packed in plastic bubble wrap Fig. 1 The cabinet comes assembled , except cresting panel (see next page for assembly instructions) and only requires attachment (installation) to the base of the stove. Further assembly of optional venting of the exhaust fan may be required. Before removing the cabinet assembly from the box, make sure you : -Remove the 4 cardboard corners. -Remove small box and its contents. -Remove the cardboard cross brace. -Remove the plastic wrapped cresting panel. 2 Assembly of Cresting Panel. Main Cabinet Cresting PanelWingnut view of top of cabinet Locate cresting panel packed in bubble wrap. Unwrap the cresting panel and remove the wingnuts. Place the cresting panel on the rear of the top of the cabinet. Take the wingnuts and fasten the cresting panel to the cabinet through the holes at each end of the cabinet. For: WOOD STOVES - go through the cabinet door. GAS, ELECTRIC & COMBINATION STANDARD OR SELF CLEAN STOVES - go through the filter openings. (NOTE: if your cupboards are too low the cresting panel may be left off). 3 ELECTRIC AND COMBINATION STOVES ONLY STOVETOP Gasket - Peel off backing and stick on. Bracket Sheet metaI screw (black) Steel Washer Machine screw (Nickel Plated) Gasket Mac...

Herunterladen

Geben Sie zwei Ziffern: