Stimmen - 2, Durchschnittliche Bewertung: 4.5
(
)
)
|
Anleitung Zusammenfassung
• Harby Road • Langar • Nottinghamshire • NG13 9HY T : 01949 862 012 F : 01949 862 003 E : service@cda.eu W : General warnings GB IE Dear Customer, Thank you for choosing our product. This appliance is easy to use; read this handbook carefully before installing and using it, however. You will find the correct indications for the best installation, use and maintenance of the product. • Very important: keep this instruction booklet with the appliance in case you pass it on to someone else. • This appliance is designed for non professional use by private individuals at home. It must be used by conscious adults, do not allow children to play with it. The front accessible parts of the equipment could overheat during use. • Supervise children and non self-sufficient people when it is being used so that they do not touch hot surfaces and are not near the appliance while it is in use. • The product installation, both gas and electric, must be performed by competent and qualified installers who are aware of the installation regulations in force. • Before switching the appliance on check that it is correctly regulated for the type of gas available (see relevant section). • Before maintenance or cleaning disconnect the appliance from the mains and wait for it to cool down. • When the burners are lit check that the flame is always regular. Before removing the saucepans turn the burners off. • The user must not change the appliance supply cable (for models which have one). For replacement contact only a qualified engineer. • The use of a gas appliance produces heat and humidity in the room where it is installed. Make sure that the room is well ventilated, keeping the natural ventilation outlets open or installing a ventilation hood with drain duct. General warnings GB IE • If a gas appliance is used for a long time it may require extra ventilation (opening a window or increase of the forced exhaust). • Be careful not to place saucepans with unstable or deformed bottoms on the burner to avoid accidents by overturning or spilling over of liquid. • If a burner is turned off accidentally turn off the control knob and try to light it again after waiting at least a minute. • For any repairs always contact an authorised Technical Customer Service Centre and ask for original spare parts. Repairs by untrained people can lead to damage. • These instructions are valid only for the countries of destination, the symbols of which appear on the cover and on the appliance. • The appliance is not intended to be operated by means of an external timer or separate remote-control system. • This product is for cooking and heating food. Do not use it for other purposes. This appliance complies with the following directives: . 2006/95/CE (low voltage) . 2004/108/CE (electromagnetic compatibility) . 89/109/CE (foodstuffs) . 2009/142/CE ex 90/396/CE (gas fittings) . 2002/96/CE (WEEE) . 2005/32/CE (EuP) Instructions for use GB IE Description of the main parts of the appliance 1 2 3 4 56 1 = grid 2 = cover 3 = spreader 4 = ON spark plug 5 = safety valve (for models equipped with a safety valve) 6 = knob for burner ignition and adjustment Instructions for use GB IE The hob control area houses the devices and knobs for operation of the gas burners. Operation of gas burners In order to ignite a burner, it is necessary to depress the knob while rotating it anti- clockwise, till the index is aligned with the position corresponding to the maximum gas delivery (i.e. the large flame symbol). As far as the models equipped with a safety valve are concerned, once the flame is lit hold the knob depressed for about 3-4 seconds, till the device keeps the burner automatically lit. At this moment it is possible to adjust the flame intensity by rotating the knob anticlockwise from such maximum position to the minimum one (i.e. the small flame symbol). In order to turn the burner off, rotate the knob clockwise bringing the index back to the position corresponding to the closure symbol . RECOMMENDATIONS In case of electric power failure, it is necessary to carry out the above-described operations by putting a gas lighter or a flame near the burner (in such an event, pay the utmost attention not to burn yourself). The safety valve (for models where such item is provided) intervenes in case of accidental flame failure, blocking the gas delivery (e.g.: air draughts, spillage of liquids, etc.). In any case, the ignition device must not be actuated for longer than 15 seconds. Should the ignition manoeuvre fail, or should the burner be accidentally turned off, immediately close the actuation knob and repeat the ignition after one minute at least. Once the ignition has taken place, adjust the flame according to your needs. Instructions for use GB IE Advice on the use of gas burners For lower gas consumption and a better yield, use saucepans with diameter suitable for the burners, avoiding the flame coming up round the side of the saucepan (see the Container Tabl...