Login:
Stimmen - 1, Durchschnittliche Bewertung: 3 ( )

Anleitung Lennox Hearth, modell COUNTRY 506033-13

Hersteller: Lennox Hearth
Dateigröße: 1.24 mb
Dateiname: Lennox_Hearth_Bella_Installation_Brick_Panels_506033-13.pdf
Unterrichtssprache:en
Link zum kostenlosen Download Hinweise finden Sie am Ende der Seite



Anleitung Zusammenfassung


# Model Description H3484 BELLA-BPK-T Brick Panel Kit, Traditional TOOLS NEEDED 5/32” Allen Wrench GENERAL INFORMATION All of these parts may scratch and bend, great care should be used in handling them. If you encounter any problems, need clarification of these instructions or are not qualified to properly install this kit, contact you local distributor or dealer. Read this instruction sheet in its entirety before beginning the installation. Failure to understand and follow these directions may result in damage to the brick panels. ALL WARNINGS AND PRECAUTIONS IN THE INSTALLATION AND OPERATION MANUAL PROVIDED WITH THE APPLIANCE APPLY TO THESE INSTRUCTIONS. TURN OFF THE STOVE AND ALLOW IT TO COMPLETELY COOL BEFORE PROCEEDING. INSTALLATION INSTRUCTIONS Step 1. Open front glass door and remove burn-pot. Step 2. Locate the socket head screw in the inside of the firebox (see Figure 2) and remove with 5/32” allen wrench. Step 3. Repeat step 2 on opposite side. NOTE: DIAGRAMS & ILLUSTRATIONS ARE NOT TO SCALE. 1 IMPORTANT NOTE: DO NOT OVERTIGHTEN SCREWS. SECURE UNTIL SNUG ONLY! Step 3. Place the right brick panel bracket on the right brick panel (see Figure 3). The bracket should fit snug. Adjust the bent tabs to ensure a snug fit between the bracket and the panel. Step 4. Repeat step 3 using the left brick panel bracket and left brick panel. Step 5. Carefully place the back brick panel into the stove and rest the bottom on the small ledge behind the ash pots (A in Figure 4). Step 6. While holding the back brick panel in place, carefully place the right side panel with attached bracket into the stove and rest the bottom of the panel on the ledge to the right of the ash pot (B in Figure 4). Step 7. Secure the brick panel bracket to the inside of the stove using one (1) 10-24 x 3/8” socket head screw (see Figure 5). Step 8. Repeat steps 6 and 7 on the left side of the stove. NOTE: DIAGRAMS & ILLUSTRATIONS ARE NOT TO SCALE. Lennox Hearth Products reserves the right to make changes at any time, without notice, in design, materials, specifications, prices and the discontinuance of colors, styles and products. Consult your local distributor for fireplace code information. LENNOX Printed in U.S.A. © 2008 Lennox Hearth Products 2 P/N 506033-13 REV. NC 12/2008 HEARTH PRODUCTS 1110 West Taft Avenue • Orange, CA 92865...


Bewertungen



Bewerten
Vorname:
Geben Sie zwei Ziffern:
capcha





Kategorien