Stimmen - 0, Durchschnittliche Bewertung: 0
(
)
)
|
Dieses Gerät hat auch andere Anweisungen:
Anleitung Zusammenfassung
Other Operations
Precautions
Troubleshooting
Specifications
General
CD player section
Rear
Listening to preset radio
Discs that this unit CAN play
Audio CDs on the market that conform to the
System
stations
The power does not turn on when the AC
CD-DA*1 standard.
Compact disc digital audio system
power cord is connected.
Laser diode properties
CD-R/CD-RW discs that contain audio tracks
Make sure the AC power cord is connected to
Emission duration: Continuous
1 Press RADIO FM/AM repeatedly to
and conform to the CD-DA*1 standard.
the wall outlet securely.
Laser output: Less than 44.6 μW
CD-R/CD-RW discs that contain MP3 files and
select a band.
(This output is the value measurement at a
are finalized*2 correctly.
The power does not turn on during
distance of 200 mm from the objective lens
*1 CD-DA is the abbreviation for Compact Disc
battery operation.
surface on the optical pick-up block with 7 mm
Digital Audio. It is a recording standard used for
Make sure the batteries are inserted correctly.
aperture.)
audio CDs.
Number of channels
*2 Finalizing is the process to make the CD-R/
The unit enters standby mode
2
CD-RW discs playable on the consumer disc
unexpectedly.
Frequency response
2 Press PRESET + or to select a stored
player products, and the finalizing can be
This is not a malfunction. The unit enters
20 Hz 20,000 Hz +1/–2 dB
enabled or disabled as optional settings during
preset number for the desired radio
Wow and flutter
disc creation in most recording software.
standby mode automatically after about
Below measurable limit
station.
15 minutes if there is no operation or audio
Discs that this unit CANNOT play
signal output. See “To use the power-
Supported audio format
management function (European models
MP3 (MPEG 1 Audio Layer-3)
CD-R/CD-RW discs other than those recorded
only).”
Bit rates: 32 kbps 320 kbps, VBR
in audio CD format or formats conforming to
Sampling frequencies: 32/44.1/48 kHz
ISO 9660 Level 1/Level 2 or Joliet
There is no sound.
CD-R/CD-RW discs of poor recording quality,
Radio section
Make sure the appropriate function is selected
CD-R/CD-RW discs with scratches or those are
Frequency range
for the music or sound source you want to
dirty, or CD-R/CD-RW discs recorded using an
European, Australian, Taiwan, Thai and
listen to.
Arabian models
Connecting optional
incompatible recording device
Unplug the headphones when listening
CD-R/CD-RW discs that are unfinalized or
FM: 87.5 MHz 108 MHz (50 kHz step)
components
through speakers.
finalized incorrectly
AM: 531 kHz 1,602 kHz (9 kHz step)
CD-R/CD-RW discs that contain files created in
Korean model
audio formats other than MP3
CD/MP3 player
FM: 87.5 MHz 108 MHz (100 kHz step)
You can enjoy the sound from an optional
AM: 531 kHz 1,602 kHz (9 kHz step)
component, such as a portable digital music
Notes on discs
The CD player does not play or “noDISC”
player, through the speakers of this unit.
Philippines, Singapore, Malaysia and India
is displayed even when a CD is in place.
Be sure to turn off the power of each component
Before playing, clean the CD with
models
a cleaning cloth. Wipe the CD
Place the CD with the label side up.
before making any connections.
FM: 87.5 MHz 108 MHz (100 kHz step)
For details, refer to the instruction manual of the
from the center out. If there are
Clean the CD.
87.5 MHz 108 MHz (50 kHz step)
component to be connected.
scratches, dirt or fingerprints on
Take out the CD and leave the CD
AM: 530 kHz 1,610 kHz (10 kHz step)
the CD, a tracking error may occur.
compartment open for about an hour to dry
531 kHz 1,602 kHz (9 kHz step)
3
Selecting play mode
Press or to select a track/file,
Do not use solvents such as
moisture condensation.
Antennas
then press ENTER .
benzine, thinner, commercially
The CD-R/CD-RW is blank or unfinalized.
FM: Telescopic antenna
The track/file is programmed and the program
available cleaners or anti-static
There are no playable MP3 files on the disc.
AM: Built-in ferrite bar antenna
You can set the unit to play tracks or files
step number appears.
spray intended for vinyl LPs.
There is a problem with the quality of the
repeatedly or in random order while a disc is
Do not expose the CD to direct sunlight or heat
Tape deck section
CD-R/CD-RW, recording device or application
stopped.
(Example: programming CD-DA tracks)
sources such as hot air ducts, or leave it in a
Recording system
software.
car parked in direct sunlight as there can be a
4-track 2-channel, stereo
Press MODE repeatedly.
Replace all the batteries with new ones if they
considerable rise in temperature inside the car.
Fast winding time
are exhausted.
Do not stick paper or a sticker on the CD, or
Approx. 150 s (sec.) with Sony cassette C-60
Frequency response
Audio
To AUDIO
scratch the surface of the CD.
The sound drops out.
Type I (normal): 80 Hz – 10,000 Hz
connection
IN jack
After playing, store the CD in its case.
Reduce the volume.
cable (not
Clean the CD, or replace it if the CD is badly
Input
Note on DualDiscs
Each time you press the button, the indication
supplied)
damaged.
AUDIO IN
changes as follows:
Step number
A DualDisc is a two sided disc product which
Place the unit in a location free from vibrations.
Stereo mini jack
mates DVD recorded material on one side with
Clean the lens with a commercially available
Output
Normal play (None)
To component
digital audio material on the other side.
blower.
(headphones) stereo mini jack
4
(e.g.,portable digital
However, since the audio material side does
Repeat step 3 to program additional
not conform to the Compact Disc (CD)
The sound may drop out or noise may be
For 16 32 impedance headphones
Single repeat ( 1)
music player)
tracks/files.
heard when using a poor quality CD-R/CD-RW
standard, playback on this product is not
General
You can check the number of programmed
1 Connect the AUDIO IN jack to the line
or if there is a problem with the recording
guaranteed.
All repeat ( )
Speaker
steps (tracks/files) by pressing DISPLAY
device or application software.
output jack of the portable digital music
Full range, 8 cm dia., 4 , cone type (2)
repeatedly.
Music discs encoded with copyright
Power output
Selected folder play ( )*
5 Press to start Program Play.
player or other component using an
Starting playback takes more time than
protection technologies
usual.
1.7 W + 1.7 W (at 4 , 10% harmonic distortion)
audio connection cable (not supplied).
This product is designed to playback discs that
Power requirements
conform to the Compact Disc (CD) standard.
The following discs take a longer time to start
Selected folder repeat play ( , )*
2 Turn the connected component on.
European and Australian models
playback.
Recently, various music discs encoded with
230 V AC, 50 Hz (AC power supply)
3 Press AUDIO IN and start playing
copyright protection technologies are
A disc recorded with a complicated tree
sound on the connected component.
9 V DC (6 R14 (size C) batteries)
Shuffle play (SHUF)
marketed by some record companies. Please
structure.
Taiwan model
be aware that among those discs, there are
A disc that has many folders or non-MP3
The created program remains available until
120 V AC, 60 Hz (AC power supply)
Program play (PGM)
some that do not conform to the CD standard
files.
you open the CD compartment cover or turn
9 V DC (6 R14 (size C) batteries)
and may not be playable by this product.
off the power of the unit. To play the same
Philippines, Singapore, Malaysia and India
program again, press .
Radio
Program repeat play ( , PGM)
Notes on cassettes
models
The sound from the connected component is
Note
Remove the overwrite protection tab from side
The sound is weak or reception is poor.
230 V 240 V AC, 50 Hz (AC power supply)
output from the speakers.
* These functions are available only when playing
If you try to program 26 tracks/files or more, “FULL”
A or B to prevent accidental recording. If you
9 V DC (6 R14 (size C) batteries)
Replace all the batteries with new ones.
MP3 files on an MP3 disc.
appears on the display.
To connect the unit to a TV or video recorder/
want to reuse the tape for recording, cover the
Thai model
Move the unit away from nearby TVs.
player, use an extension cable (not supplied)
broken tab using adhesive tape.
220 V AC, 50 Hz (AC power supply)
For FM reception, extend the antenna to its full
Playing tracks/files repeatedly
To cancel Program Play
with a stereo-mini plug on one end and two
9 V DC (6 R14 (size C) batteries)
length, and reorient it for best FM reception.
Korean model
(Repeat Play)
Press to stop playback, and then press
phono plugs (L/R) on the other end.
MODE repeatedly until “PGM” disappears from
Side A
For AM reception, reorient the unit itself to find
220 V AC, 60 Hz (AC power supply)
You can set the unit to repeatedly play CD-DA
the display.
Notes
the best reception.
9 V DC (6 R14 (size C) batteries)
tracks on an audio CD, or MP3 files on a CD-R/
If the AUDIO IN jack is connected to the
If you are in a building, listen near a window.
Arabian model
CD-RW disc in normal and program play modes.
To delete all tracks/files in the current
monaural output jack of a digital music player,
If a mobile phone is placed close to the unit, a
220 V 240 V AC, 50/60 Hz (AC power
sound may not be emitted through the right
Tab for side A
1 Press CD to turn on the CD function.
program
loud noise may be heard from the unit. Keep
supply)
Tab for side B
Stop playback, and then press . “noSTEP”
speaker of the unit.
the phone away from the unit.
9 V DC (6 R14 (size C) batteries)
appears and you can create a new program,
If the AUDIO IN jack is connected to the line out
Power consumption
jack of a digital music player, distortion may occur.
following the procedure “Creating your own
The use of a cassette tape with more than
The TV picture is unstable.
AC 12 W (approx. 0.8 W at the power saving
If the sound is distorted, connect to the
90 minutes of play time is not recommended
program (Program Play).”
headphones jack instead.
If you are listening to an FM program near a TV
mode)
except for long, continuous recording or
Battery Life*1, *2
If the AUDIO IN jack is connected to the
with an indoor antenna, move the unit away
playback.
2 Proceed as follows.
headphones jack of a digital music player,
from the TV.
Playback of CD
increase the volume of the digital music player,
Approx. 8 hours (at a volume level of around
On safety
To repeat
Do this
Presetting radio stations
and then adjust the volume of the unit.
Tape
24)
As the laser beam used in the CD player
Recording FM programs
A single track/
1 Press MODE repeatedly
section is harmful to eyes, do not attempt to
Approx. 19 hours
file
until “ 1” appears.
You can store radio stations in the unit’s memory.
The tape does not move when you press
disassemble the casing. Refer servicing to
Playback of tape
2 Press or to
You can preset up to 30 radio stations, 20 for FM
an operation button.
qualified personnel only.
Approx. 13 hours (at a volume level of around
select a track/file that you
and 10 for AM.
Close the cassette compartment cover
Should any solid object or liquid fall into the
24)
want to repeat. When you
1 Press RADIO FM/AM repeatedly to
securely.
unit, unplug the unit, and have it checked by
*1 Measured by Sony standards. The actual
want to specify a folder that
qualified personnel before operating it any
battery life may vary depending on the
contains MP3 files, press
select a band.
The button does not function or the
further.
circumstances of the unit or operating
+ or first to select a
tape does not start playback or recording.
Discs with non-standard shapes (e.g., heart,
conditions.
folder, and then press
square, star) cannot be played on this unit.
Make sure that the overwrite protection tub
*2 When using Sony alkaline batteries
or to select a file.
has not been removed.
Attempting to do so may damage the unit. Do
Dimensions
3 Press to start Repeat
not use such discs.
Approx. 320 mm × 139 mm × 219 mm (W/H/D)
Play.
Poor or distorted playback, recording or
(incl. projecting parts)
All tracks/files
1 Press MODE repeatedly
2 Hold down AUTO PRESET until “AUTO”
On power sources
erasing quality.
Mass
until “ ” appears.
flashes on the display.
For AC operation, use the supplied AC power
Clean the surfaces of the pinch roller, play/
Approx. 2.0 kg
2 Press to start Repeat
cord; do not use any other cord.
recording head and erase-head as shown
Approx. 2.3 kg (including the weight of a disc,
Play.
below using a dry cotton swab. If the surfaces
batteries and a cassette tape)
Unplug the unit from the wall outlet if it is not
are still dirty, clean them using a cotton swab
A selected
1 Press MODE repeatedly
to be used for an extended period of time.
Supplied accessories
moistened with a commercially available
folder on an
until “ ” and “ ” appear.
When not using the batteries, remove them to
AC power cord (1)
cleaning fluid.
MP3 disc
2 Select a folder by pressing
avoid damage that can be caused by battery
+ or .
leakage or corrosion.
Lever*
Design and specifications are subject to change
3
3 Press
Press ENTER to store the station.
to start Repeat
without notice.
Play.
The stations are stored in memory from lower
On placement
frequencies to higher ones.
Programmed
1 Program tracks/files (see
Do not leave the unit in a location near heat
tracks/files
“Creating your own program
sources, in a place subject to direct sunlight,
(Program Play)”).
excessive dust or mechanical shock, or in a car
subject to the direct rays of the sun.
2 Press MODE until “PGM”
and “ ” appear on the
Do not place the unit on an inclined or
display.
unstable surface.
Pinch roller
Erase-head
3 Press to start Repeat
Do not place anything within 10 mm of the rear
Play.
If a station cannot be preset
of the cabinet. The ventilation openings must
automatically
be unobstructed for the unit to operate
properly and prolong the life of its
To cancel Repeat Play
You need to preset a station with a weak signal
components.
Capstan
Play/Recording
Press to stop playback, and then press
manually.
Since a strong magnet is used for the speakers,
head
MODE repeatedly until “ ” (or “ 1”)
keep personal credit cards using magnetic
disappears from the display.
1 Press RADIO FM/AM repeatedly to
select a band.
coding or spring-wound watches away from
* Expose the erase-head by
the unit to prevent possible damage from the
Playing tracks/files in random order
pressing the recording button (
magnet.
) while holding down the lever
(Shuffle Play)
with your finger.
You can set the unit to play CD-DA tracks on an
On operation
audio CD or MP3 files on a CD-R/CD-RW disc in
If the unit is brought directly from a cold to a
random order.
warm location, or is placed in a very damp
Demagnetize the heads using a commercially
room, moisture may condense on the lens
1
available tape head demagnetizer.
Press CD to turn on the CD function.
2 Tune to the desired station.
3 Press MANUAL PRESET until “FM-xx”
inside the CD player section. Should this occur,
Use a type I (normal) cassette tape. You cannot
the unit will not operate properly. In this case,
or “AM-xx” flashes on the display.
use the type IV (metal) tapes or type II (high
remove the CD and wait about an hour for the
position) tapes with this system. These types
(Example: FM)
moisture to evaporate.
may cause sound distortion.
On handling the unit
2 Press MODE repeatedly until “SHUF”
After trying the suggested remedies, if the
Do not leave the CD compartment open to
appears on the display.
problem persists, unplug the AC power cord or
avoid dust and debris contamination.
remove all the batteries. After all the indications
on the display disappear, plug in the AC power
On cleaning the cabinet
4 Press PRESET + or until the preset
cord again, or re-insert the batteries. If the
Clean the cabinet, panel and controls using a
problem persists, consult your nearest Sony
number for the station you want flashes
soft cloth slightly moistened with a mild
dealer.
detergent solution. Do not use any type of
3 Press to start Shuffle Play.
on the display.
abrasive pad, scouring powder, or solvent,
such as alcohol or benzine.
If you have any questions or problems
concerning your unit, consult your nearest Sony
dealer.
5 Press ENTER to store the station.
To cancel Shuffle Play
If another station is already assigned to the
Press to stop playback, and then press
selected preset number, that station is
MODE repeatedly until “SHUF” disappears
replaced by the new one.
from the display.
Note
During Shuffle Play, you cannot select the previous
track/file by pressing .
Creating your own program (Program
Play)
You can arrange the playing order of up to 25
tracks/files on a disc.
1 Press CD to turn on the CD function.
2 Press MODE repeatedly until “PGM”
appears on the display.