Stimmen - 2, Durchschnittliche Bewertung: 4.5
(
)
)
|
Anleitung Zusammenfassung
Wipe in a straight motion from the center to the edge. Never use thinner, benzine, record cleaner or anti-static spray on a compact disc. Such chemicals can damage its plastic surface. califone.com 6 MAINTENANCE CLEANING THE CABINET Wipe with a soft cloth. If the cabinet is very dirty, dampen the cloth with a weak solution of neutral detergent and water, and then wipe clean. CLEANING THE LENS A dirty lens will cause sound skipping and if the lens is very dirty, the CD may not work. Open the disc cover and clean the lens as below: • Dust or Dry Particles Using a camera lens brush/blower, blow on the lens several times and wipe it lightly with the brush to remove dust. Blow on the lens one more time. • Fingerprints If the lens cannot be cleaned by using a brush/blower, use a dry cotton swab starting from the middle and working to the outside edge. califone.com 7 BASIC DISC PLAY This CD-player can play Audio Discs such as CD-Recordables and CD- Rewritables. DO not try to play a CD-ROM, CDi, VCD, DVD or computer CD. 1. Connect the earphones to the PHONES (GREEN) socket. 2. Press the OPEN button to open the CD compartment lid. 3. Adjust the VOLUME to minimum. 4. Insert the disc with the label side facing up. 5. Close the lid securely until a click is heard. 6. Press the PLAY button to start playing. To Emphasize the bass sound Set the BASS BOOST switch to the ON position. Note: The bass boost performance will depend on the VOLUME control setting. HOLD Switch This switch prevents accidental selection of an unwanted function during Playback or Stop mode. In the HOLD “ON” position, no function button on the unit can be operated (except OPEN). Moving the switch to the “OFF” position will allow the unit to return to normal operation. Turning Power on and off This unit has no ON/OFF switch. To turn on and off, press the following buttons. To turn on: Press >II PLAY/PAUSE (playback starts). To turn off: Press STOP button once for standby mode. Press STOP button twice to turn off the power. Auto power-off function When the unit is stopped (standby mode) for approximately 30 seconds, the power will automatically turn off. califone.com 8 LCD DISPLAY INFORMATION WHEN POWER IS ON If a disc is in, auto adjustment starts. During adjustment, display shows - -. • If no disc is in, disc is displayed. Put the disc in and close the lid. Auto adjustment starts. • If the lid is open, display shows OPEN. Closing the lid starts auto adjustment. • If unable to read TOC then Er is displayed. Note: TOC means Table Of Contents. • When TOC data has been read, display shows TOC for 1 second. • To turn on anti-shock press ANTI-SHOCK key play, ANTI-SHOCK will start. To turn anti-shock off press ANTI-SHOCK key again, the will disappear on the display. TO PLAY FROM STOP CONDITION • Press the PLAY/PAUSE button. The display changes to 01 00:00 and starts play. • When the memory is full, stops flashing. TO STOP Press the STOP button. This will stop play and the TOC will be displayed. TO PAUSE Press the PLAY/PAUSE button and the pause on/off button alternately. When the unit is paused, the time display will flash. califone.com 9 REPEAT/PLAY MODES Every time the MODE button is pressed, the corresponding mode appears in the display window. Shown on the LCD display. The current track on the disc will be repeated. Shown on the LCD display. All tracks on the disc will be repeated. NOTE: In normal mode, none of the above mode symbols will be shown in the display. NORMAL PLAYBACK During normal playback a indicator appears on the display when the batteries need to be changed. califone.com 10 INTRO PLAY 1. Press the MODE button three times; INTRO will display. 2. Press the PLAY/PAUSE button, starts INTRO play from track no.01. 3. Select INTRO mode during play; INTRO starts flashing. • Press the PLAY/PAUSE button. Flashing will stop and INTRO play will start from track no. 01. • Press >>I to play the current track. Flashing will stop, and INTRO play will start from next track. • Press I<<. Flashing will stop and INTRO play will start from current track. PROGRAM PLAY 1. Press the PROG button; PROGRAM will start flashing. 2. Press I<< or >>I to select the desired track. 3. When the desired track is displayed, press the PROG button to register. The track No. display changes to 00 again. 4. Repeat steps 2 and 3 to program the order of more tracks. Up to 20 tracks can be programmed into memory. To complete programming and start playback Press the PLAY/PAUSE button. PROGRAM will stop flashing and playback will begin. To clear programming • Register 00 on the first program track. • Open the door. • Power Off This allows selected tracks on the disc to be played in any desired order. To set the program play • Programming can be set in the STOP mode or normal play mode. califone.com 11 RANDOM PLAY Enables all the tracks on a disc to be played in a Random(Shuffle) sequence. 1. Press the MODE button four times; RANDOM will display. 2. Press the PLAY/PAUSE button. The Tr...