Stimmen - 3, Durchschnittliche Bewertung: 3.7
(
)
)
|
Anleitung Zusammenfassung
09-07-10 Owner’s Manual MAKE THE CONNECTION iPod iPad to your iPhone to your to your MediaWire TM support@iSimpleSolutions.com iSimple® A/V CABLE WITH REMOTE FOR YOUR iPod, iPhone, OR iPad Video not intended to be in view of driver wireless remote remote holder connection for iPod, iPhone, or iPad audio / video output PRO 2010 1. Introduction Thank you for purchasing the iSimple® MediaWire™PRO. This product is designed to provide endless hours of listening and viewing pleasure from your factory or aftermarket entertainment system. To ensure optimal performance of the MediaWire™PRO we recommend that you read this entire manual before beginning the installation of this product. The MediaWire™PRO provides connectivity between your iPod, iPhone, or iPad and any audio or audio/video system that accepts RCA connections. Note: many factory radios require an auxiliary input device to accept an RCA connection. For video output, an iPod, iPhone, or iPad with video capability is required. The MediaWire™PRO will also charge your iPod, iPhone, or iPad while connected. Visit to see auxiliary input solutions for your radio. 2. Precautions PREVENTING DAMAGE TO YOUR VEHICLE OR MEDIA PLAYER Installation of this product requires you to make wiring connections. To eliminate the risk of an electrical short, we recommenddisconnectingthe vehicle’s battery priorto installation. Ifyou do notfeel comfortable making theseconnections, we suggest you seek professional installation. We recommend that the iPod, iPhone, or iPad be disconnected from the cable when the vehicle is not in use. 3. Installation 1. Using a voltmeter, identify a 12V+ wire and a ground wire. 2. Connect the red wire on the MediaWire™PRO to the 12V+ constant power wire (or you can connect the MediaWire™PRO red wire to a switched accessory wire to provide battery charging only when the vehicle is running). 3. Connect the black wire on the MediaWire™PRO to ground. 4. Plug the male RCA connector ends of the MediaWire™PRO into the receivers auxiliary audio or A/V input. 5. Choose a convenient mounting location for your device. This is typically a glove box, center console or mounting cradle. 6. Run the docking cable and RCA connectors to the desired mounting location. 7. Securely install the cable in a location free from heat, humidity, moving parts, or sharp metal edges. We recommend securing the MediaWire™PRO to a suitable location using double sided tape, VelcroTM or zip-ties. Accessing your auxiliary audio source Please refer to the owners manual that came with your radio or vehicle for directions on how to access your radio’s auxiliary input source. On some models of iPod, iPhone, or iPad you will need to enter the settings menu, and select video, select TV out, and set this option to “ASK”. When a video is selected to play, the iPod, iPhone, or iPad will ask “do you want to enable TV out?” select on, to view video on an external screen using this product. Some newer models of iPod, iPhone, or iPad do not have this option in the video settings menu. Instead, after connecting your iPod, iPhone, or iPad to our product, and selecting a video to play, the device will ask you automatically “Display on TV?” Choose “YES” to watch the video on an external monitor. 4. Mounting options 1. Dashboard: A strip of hook and loop tape has been provided if dash mounting of the wireless remote is desired. Use the supplied alcohol prep. pad to clean the surface of the chosen mounting location for the remote. Allow surface to dry thoroughly before applying the hook and loop tape to ensure best performance. 2. Steering Wheel Mounting: The remote mounting cradle is designed to fit snugly to your steering wheel for safe and convenient access. Using the supplied attaching strap, tighten the mounting cradle to the steering wheel. The mounting cradle can be installed on either the left or right side of the steering wheel. Caution! The remote mounting cradle gives you quick access to wireless remote while keeping both hands on the wheel. It is designed to be attached to the inside of the steering wheel perimeter. Position the cradle in an open space so as not to interfere with the deployment of the airbag or other steering wheel operations. Improper installation may lead to injury in the event of airbag deployment. LeftRight Removing wireless Remote from the Mounting Cradle: To remove the wireless remote from the mounting cradle, push upwards gently on the remote by placing your finger inside the recess on the side of the mounting cradle. MENU 4. Remote Control Battery installation Before using your remote control with your device, Please first install the CR2025 Battery (included) into the remote as shown. Operation The wireless remote control is designed to give you access to your iPod, iPhone, or iPad music library without handling your device. The remote will provide such controls as: track forward, and track back, as well as navigation through the iPod me...