In these cases, mark the track numbers after recording, using the deck’s Divide Function (see “Dividing Recorded Tracks” on page 42). • When recording from a source connected through the LINE (ANALOG) IN jacks with the INPUT switch set at ANALOG or when recording from a DAT or satellite broadcast connected through one of the digital input connectors with the INPUT switch set at the respective digital position and “T.Mark Off” selected in Setup Menu 02: The source will be recorded as a single track. • Even while recording an analog source or a DAT or satellite broadcast, you can mark track numbers if “T.Mark LSyn” is selected in Setup Menu 02 (see “Marking Track Numbers While Recording” on page 16). • When recording from DAT or satellite broadcasts with the INPUT switch set at the respective digital position, the deck automatically marks a track number whenever the sampling frequency of the input signal changes regardless of the Setup Menu 02 setting. z You can mark track numbers during or after recording For details, see “Marking Track Numbers While Recording” (page 16) and “Dividing Recorded Tracks” (page 42). When “TOC Writing” flashes in the display The deck is currently updating the Table Of Contents (TOC). Do not move the deck or pull out the AC power cord. Changes to an MD made through recording are saved only when you update the TOC by ejecting the MD or changing the deck to standby by pressing the 1/uswitch. The MD deck uses the SCMS (Serial Copy Management System on page 53) MDs recorded through digital input connector cannot be copied onto other MDs or DAT tapes through the digital output connector. When the deck is recording or in recording pause, digital signals input through one of the digital input connectors are output to the respective digital output connector with the same sampling rate To change the digital input signal to another sampling rate for output (without recording it to an MD), use Input Monitor Function (see page 13). 12EN Recording on MDs Recording on MDs Useful Tips for Recording DISPLAY/CHAR MENU/NO ­ AMS ± INPUT Pp0) ¤a¤ EJECT TIME · pr REC Checking the remaining recordable time on the MD Press TIME. • When you press the TIME button repeatedly while the deck is stopped, the display alternates between total disc playing time and remaining recordable time on the MD (see page 23). • When you press the TIME button repeatedly while recording, the display alternates between the recording time of the current track and the remaining recordable time on the MD. Changing the display while recording Each time you press DISPLAY/CHAR (or DISPLAY) while the deck is recording, you can change the display as follows: Press Press Press Normal display Recording level display FS (sampling frequency) display Monitoring the input signal (Input Monitor) Before starting recording, you can monitor the selected input signal through the deck’s output connectors. 1 Press ¤ EJECT to remove the MD. 2 Set INPUT according to th...

Dieses Handbuch ist für folgende Modelle:
- ()