Stimmen - 1, Durchschnittliche Bewertung: 5
(
)
)
|
Fotos und technische Daten Sony CFD-S28L |
Anleitung Zusammenfassung
You can preset up to 30 radio stations (CFD-S28L/S38L) or 20 radio stations (CFD-S38/S55), 10 for each band in any order. On the remote (CFD-S38/S38L/S55 only) 1 Press BAND until the band you want appears in the display. 2 Tune in a station you want. 3 Hold down the number buttons that you want to preset the new station on for 2 seconds. RADIO BAND DISPLAY ENT MEMORY LOOP AUTO PRESET PRESET +, – The Radio 1 Press RADIO BAND until the band you want appears in the display. 2 Hold down LOOP•AUTO PRESET for 2 seconds until “AUTO” appears in the display. The stations are stored in memory from the lower frequencies to the higher ones. If a station cannot be preset automatically You need to preset a station with a weak signal manually. 1 Press RADIO BAND to select the band. 2 Tune in a station you want. 3 Hold down DISPLAY ENT•MEMORY for 2 seconds. 4 Press PRESET + or – until the preset number (1 to 10) you want for the station flashes in the music calender. 5 Press DISPLAY ENT•MEMORY. The new station replaces the old one. 19GB The Radio Playing preset radio stations RADIO BANDOnce you've preset the stations, use the number buttons on the remote or PRESET +/– on the player to tune in to your favorite stations. PRESET +, – On the remote 1 Press RADIO BAND to select the band. (CFD-S38/S38L/S55 only) 2 Press PRESET + or – to tune in the stored station. the band. 2 Press the number buttons to tune in the stored station. 1 Press BAND to select 20GB The Radio The Timer Setting the clock CLOCK “- -:- -” indication appears in the display until you set the clock. DISPLAY ENT MEMORY TIME SET TUNE +, – Tip The time display system: 24-hour system Before you set the clock, connect the power source (see page 24). 1 Press CLOCK for 2 seconds until the hour digit flashes. 2 Press TIME SET•TUNE + or – until you set the current hour. Then press DISPLAY ENT• MEMORY. The minute digits flash. Set the minutes by pressing TIME SET•TUNE + or – until the correct minute is displayed. / 3 Press DISPLAY ENT•MEMORY. The clock starts from 00 seconds. The Timer 21GB The Timer Waking up to music STANDBY TIMER You can wake up to music or a radio program at a preset time. Make sure DISPLAY ENT you have set the clock (“Setting the clock” on page 21). – 1 To play the radio a CD 2 Press TIMER. The t“RAdIO”) flash. 3 “ pressing TIME SETENT•MEMORY. 4” “ – “ ” ” – DISPLAY ENT• Set the minutes, then press DISPLAY ENT• MEMORY. 5 Set the timer to the hour and the minutes you want the music to go off. (Do as step 4.) 22GB The Timer Tips • To exit the standby mode, press STANDBY to make tdisappear from the display. • The preset settings remain until you reset them. 6 Press TIME SET•TUNE + or – to set the volume, then DISPLAY ENT•MEMORY. 7 Press STANDBY. The tindication lights up and the power goes off. At the preset time, the power will go on, and the music will play. Then the power will go off at the preset time, and the player will enter into the standby mode. To check/change when the playback will start Press TIMER, then DISPLAY ENT•MEMORY. Each time you press DISPLAY ENT•MEMORY, a stored setting is displayed in the set order. To change the setting, display the setting you want to change and reenter it. To use the player before a timer playback starts Just turn on the player, and then you can use it. If you turn off the player before the preset time, timer playback will start at the preset time. In case of the radio, however, if you listen to the station which is different from the one you tuned in in step 1 on page 22, you will hear that station at the preset time. Make sure to tune in the station you want to listen to before you turn off the player. To stop play Press OPERATE (or POWER) to turn off the power. The Timer 23GB The Timer Falling asleep to music You can set the player to turn off automatically after 10, 20, 30, 60, 90, and 120 minutes, allowing you to fall asleep while listening to music. SLEEP Tip You can fall asleep and wake up to different music. Set the waking up timer first (see page 22), turn on the power, and then set the sleeping timer. However, you cannot store different radio stations. Note When you are playing a tape using this function: If the tape length of one side is longer than the set time, the player will not go off until the tape reaches the end. 1 Play the music source you want. 2 Press SLEEP to display “SLEEP.” 3 Press SLEEP to select the minutes until the player goes off automatically. Each time you press the button, the indication changes as follows: “60” n “90” n “120” n no indication n “10” n “20” n “30.” To cancel the sleep function Press OPERATE (or POWER) to turn off the power. 24GB The Timer Setting Up Choosing the power sources You can use the AC power or batteries as a power source. 14 Battery compartment AC IN 2 to a wall outlet Setting Up 1 Inserting the back-up batteries Insert four R6 (size AA) batteries (not supplied) into the battery compartment. These batteries work to save the memory data. Replacing bat...
Dieses Handbuch ist für folgende Modelle:Player - CFD-S38L (578.61 kb)
Player - CFD-S55 (578.61 kb)