Stimmen - 2, Durchschnittliche Bewertung: 4.5
(
)
)
|
Anleitung Zusammenfassung
You can check the remaining recordable time on the MD Press DISPLAY (see page 17). 14EN Recording on MDs Recording on MDs Synchro-Recording a Tape and Radio Program Z By using the MUSIC SYNC button on the remote, you can automatically start recording in sync with the signal input from the program source through the LINE (ANALOG) IN jacks (Music Synchro-Recording). The method of marking track numbers differs, depending on the program source being recorded and how the deck is connected to the program source. (See “Notes on Recording” on page 9.) )0P+=p a a » a » . a )0P+=p A MUSIC SYNC 1 Do Steps 1 to 5 in “Recording on an MD” on page 6. 2 Press MUSIC SYNC. The deck changes to recording pause. 3 Start playing the program source you want to record. The deck starts recording automatically. To stop Music Synchro-Recording Press p. Notes • You can also use this procedure for synchro-recording digital audio from other equipment connected to the DIGITAL IN connector. • When Music Synchro-Recording, the Smart Space Function and the Auto Cut Function turn on automatically regardless of their setting (on or off) and type of input (digital or analog). Recording on an MD Using a Timer By connecting a timer (not supplied) to the deck, you can start and stop recording operations at specified times. For further information on connecting the timer and setting the starting and ending times, refer to the instructions that came with the timer. TIMER p • ••• • • • • • • • a. •• •• ••• r) 0¤ =+ 1 Do Steps 1 to 7 in “Recording on an MD” on pages 6 and 7. 2 • If you want to specify the time for the start of recording, press p. • If you want to specify the time for the end of recording, do Steps 8 and 9 of “Recording on an MD” on page 7. • If you want to specify the time for both start and end of recording, press p. 3 Set TIMER on the deck to REC. 4 Set the timer as required. • When you have set the time for the start of recording, the deck turns off. When the specified time arrives, the deck turns on and starts recording. • When you have set the time for the end of recording, recording continues. When the specified time arrives, the deck stops recording and turns off. • When you have set the time for both the start and end of recording, the deck turns off. When the starting time arrives, the deck turns on and starts recording. When the ending time arrives, the deck stops recording and turns off. (Continued) 15EN Recording on MDs Recording on MDs 5 After you have finished using the timer, set TIMER on the deck to OFF. Then place the deck in standby status by plugging the AC power cord of the deck into a wall outlet or set the timer to continuous operation. • If TIMER is left at REC, the deck will automatically start recording the next time you turn the deck on. • If you do not change the deck to standby status for more than a month after timer recording has finished, the recorded contents may disappear. Make sure to change the deck to standby status within a month after timer recording is completed The TOC on the MD is updated and recorded contents are written to the MD when you turn the deck on. If the recorded contents have disappeared, “STANDBY” flashes when you turn the deck on. Notes • It may take about 30 seconds after the deck is turned on until recording starts. When recording at a specified time using the timer, be sure to take this time into account when setting the recording start time. • During timer recording, new material is recorded from the end of the recorded portion on the MD. • Material recorded during timer recording will be saved to the disc the next time you turn the deck on. “TOC” will flash in the display at that time. Do not move the deck or pull out the AC power cord while “TOC” is flashing. • Timer recording will stop if the disc becomes full. 16EN Playing MDs Playing MDs Using the Display You can use the display to check disc and track information such as the total track number, total playing time of the tracks, remaining recordable time of the disc and disc name. SCROLL DISPLAY/CHAR SCROLL DISPLAY Checking the total track number, total disc playing time, remaining recordable time of the disc and the title of the disc Each time you press DISPLAY/CHAR (or DISPLAY) while the deck is stopped, you can change the display as follows: Total track number and total playing time of all recorded tracks )0P+=p a a » a » . a )0P+=p A The remaining recordable time of the disc is not shown for premastered MDs. A Press Disc name Press A Press Remaining recordable time of the disc (Recorded MDs only) When you insert an MD, the disc name, total number of tracks, and total disc playing time appear in the display as follows: Disc name Music calendar Total number of tracks Total disc playing time The disc name appears, followed by the total number of tracks (Tr) and total disc playing time. A music calendar showing all the track numbers appears within a grid if the MD is a premastered disc, or without a grid if the MD is a r...