Stimmen - 5, Durchschnittliche Bewertung: 4.4
(
)
)
|
Fotos und technische Daten Sony MDS-JE780 |
Anleitung Zusammenfassung
Inserting batteries into the remote Insert two R6 (size-AA) batteries into the battery compartment with the + and – properly oriented to the markings. When using the remote, point it at the remote sensor on the deck. Connecting a personal computer to the deck (Net MD) By installing the supplied software OpenMG Jukebox onto your computer, you can transfer digital music contents saved on the hard disc of your computer to (Check Out) and from (Check In) an MD. For details on the installation and operation of OpenMG Jukebox, refer to the instruction manual or the online help for OpenMG Jukebox. Be sure to install the OpenMG Jukebox software to your computer before you connect the MD deck and your computer. 1 2 Computer Tip When the remote no longer operates the deck, replace Required cord both batteries with new ones. USB cable (supplied) Notes • Do not leave the remote in an extremely hot or humid place. • Do not drop any foreign object into the remote casing, particularly when replacing the batteries. • Do not use a new battery with an old one. • Do not expose the remote sensor to direct sunlight or lighting apparatus. Doing so may cause a malfunction. • If you don’t use the remote for an extended period of time, remove the batteries to avoid possible damage from battery leakage and corrosion. 8GB Notes • Do not use a USB hub or USB extension cable between the MD deck and the computer. Be sure to connect the MD deck directly to the computer with the supplied USB cable. • Make sure the USB connector is straight when you insert it. Inserting it at an angle may damage the connector parts. • Be sure to install the OpenMG Jukebox software to the computer before you connect the MD deck and the computer by the USB cable. Otherwise, the computer may select an inappropriate driver for the MD deck when you connect them, and the MD deck may not work correctly. The [Add New hardware wizard] may appear when you connect the MD deck to the computer. If this happens, click [Cancel]. • Sound output is not supported when you connect the MD deck to the computer by the supplied USB cable alone. To output sound from the MD deck to the speakers of the connected computer, use the supplied audio connecting cord (a stereo mini-plug is provided on both ends) or a resistance-free, equivalent commercially available product to connect the ANALOG OUT jack on the MD deck with the analogue input jack on the computer. • Do not disconnect the USB cable while the Net MD function is on. Be sure to turn off the Net MD function before disconnecting the USB cable. • Disconnecting the USB cable is recommended other than when connecting and operating the MD deck from your computer. Using the Net MD function 1 Turn on the computer. 2 Press ?/1 to turn on the deck. The STANDBY indicator turns off. 3 Load an MD into the slot. 4 Press NET MD. The Net MD function is activated and “Net MD” appears. 5 Start up and operate OpenMG Jukebox on the computer. 6 Quit OpenMG Jukebox after use. 7 Press NET MD to turn off the Net MD function. Notes • When the Net MD function is on, only the following buttons on the MD deck can be operated. —EJECT A — NET MD — ?/1 However, note that these buttons may not function when the deck is in certain statuses. • When the Net MD function is turned on, the following functions are cancelled or the settings are cleared: — Repeat Play, Shuffle Play, Programme Play — Group function — Sleep Timer — Auto Space, Auto Pause — Pitch Control • When “Check USB” appears in the display, check the USB connection of the deck and the computer. • You cannot perform editing operations on the checked out tracks other than “Moving recorded tracks” on page 31 and “Naming a track or an MD” on page 31 using this deck. Getting Started 9GB Recording to MDs Recording to MDs Recording to an MD If the MD has been partially recorded, recording starts after the recorded tracks. 1 Turn on the amplifier and programme source, and select the source on the amplifier. 2 Press ?/1 to turn on the deck. The STANDBY indicator turns off. 3 Load a recordable MD into the slot (page 20). 4 Press INPUT repeatedly to select the input jacks (connector) connected to the programme source. When the source is Set INPUT to connected to the DIGITAL OPTICAL IN OPT connector1) DIGITAL OPTICAL IN1 or OPT1 or OPT2 IN2 connector2) DIGITAL COAXIAL IN jack1) COAX ANALOG IN jacks ANALOG 1) European model only 2) Other model only 5 Press REC z. The deck changes to recording pause. 6 If necessary, adjust the recording level. For details, see “Adjusting the recording level” on page 16. 7 Press H or X, then start playing the desired source to record. Operations you may want to do during recording To Press Stop recording x Pause recording X Resume recording after H or X pausing3) Eject the MD EJECT A after stopping recording 3) The track number increases by one. To change the display while recording Press LEVEL/DISPLAY/CHAR (or DISPLAY) repeatedly to change the display. Each press of the butto...