Stimmen - 3, Durchschnittliche Bewertung: 3.7
(
)
)
|
Fotos und technische Daten Sony NWZ-E364 |
Anleitung Zusammenfassung
.As the supplied headphones are of open-air design, sounds go out through the headphones. Remember not to disturb those close to you. Owner’s Record The model and serial numbers are located on the back of the player. Record them in the space provided below. Refer to these numbers in the spaces whenever you call upon your Sony dealer regarding this product. Model No. __________________________ Serial No. __________________________ For users in France When replacing the headphones/earphones, please refer to the model of the headphones/ earphones adapted to your unit that appears below. MDR-E804 At high volume, prolonged listening to the personal audio player can damage the user’s hearing. License and Trademark Notice Refer to the User Guide (HTML document). To initialize (format) the player You can format the built-in flash memory of the player. If the memory is formatted, all files including the User Guide (HTML document) will be erased and all setting values returned to their defaults. Be sure to verify the files stored in memory prior to formatting, and then export any necessary files to the hard disk of your computer or other device beforehand. 1 Press and hold the BACK/HOME button until the Home menu appears. 2 Select [Settings] – [Common Settings] – [Format] – [Yes] – [Yes] in this order. Press the ./././. button to select the item, and then press the . button to confirm. When initialization finishes, [Memory formatted.] appears. Note .Do not format the built-in flash memory using Windows Explorer. If you format the built-in flash memory, format it on the player. The player cannot charge the battery. . The USB cable is not connected to a USB connector on your computer properly. .Disconnect the USB cable, and then reconnect it. .Use the supplied USB cable. . The battery is charged in an ambient temperature out of the range of 5 °C (41 .F) to 35 °C (95 .F). .You cannot charge the battery when icon appears. Charge the battery in an ambient temperature of 5 °C (41 .F) to 35 °C (95 .F). . The computer is not on. .Turn on the computer. . Your computer has entered Sleep or Hibernation status. .Release the computer from Sleep or Hibernation status. . A USB hub is being used. .Connecting the player via a USB hub may not work. Connect the player to your computer using the USB cable (supplied). . The operating system installed on the computer is not supported by the player. .To charge the player, connect the player to a computer with the operating system that is supported by the player. . You have not used the player for more than a year. .Depending on the conditions under which your player is used, the battery may have been deteriorated. Consult your nearest Sony dealer. [Connected USB. The Timer and Alarm will become invalid.] or [Connected USB (MTP) The Timer and Alarm will become invalid.] does not appear when connected to the computer with the USB cable (supplied) (The computer does not recognize the player). . The USB connector on your computer may have a problem. .Connect the player to another USB connector on your computer. . When you use the player for the first time, or when the battery is low, it may take the player about 30 seconds to display the message after connected to a computer. This is not a malfunction. . The software authentication may be performed and it may take rather a long time. Wait for a while. . The software installation has been failed. .Reinstall the software by using the installer. The imported data will remain untouched. . The computer is running another software other than the one used for transferring. .Disconnect the USB cable, wait a few minutes, and reconnect it. If the problem persists, disconnect the USB cable, restart the computer, and then reconnect the USB cable. . [Connected USB. The Timer and Alarm will become invalid.] or [Connected USB (MTP) The Timer and Alarm will become invalid.] may not appear on the player, depending on the software environment that is running on your computer. .Activate Windows Media Player, or Windows Explorer. The player becomes . A USB hub or USB extension cable is being used. unstable while it is .Connecting the player via a USB hub or extension connected to the cable may not work. Connect the player directly to computer. your computer using the USB cable (supplied). [Connected USB. The Timer and Alarm will become invalid.] or [Connected USB (MTP) The Timer and Alarm will become invalid.] does not appear when connected to the computer with the USB cable (supplied) (The computer does not recognize the player). (Continued) . The remaining battery power is insufficient. .Charge the battery by connecting the player to a running computer for at least 5 minutes. . The USB cable is not connected to a USB connector on your computer properly. .Disconnect the USB cable, and then reconnect it. .Use the supplied USB cable. . A USB hub is being used. .Connecting the player via a USB hub may not work. Connect the player directly to your computer using the...
Dieses Handbuch ist für folgende Modelle:Player - NWZ-E363 (472.7 kb)