Stimmen - 6, Durchschnittliche Bewertung: 4.3
(
)
)
|
Anleitung Zusammenfassung
Recorder Operation Looking at the controls Front of the recorder 67123589q; 4 A Display window F T MARK/REC button B GROUP/CANCEL button G END SEARCH button C MENU/ENTER button H USB connecting jack D DC IN 3V jack I LINE IN (OPTICAL) jack E Buckle J i (headphones/earphones) jack Rear of the recorder AHand strap attachment point BHOLD switch CX (pause) button DBuckle EBattery compartment lid FOPEN switch G5 way thumb control key Push the key in any of the four directions or press down the xfor various operations. N* (play) ./> (search/AMS) x (stop) VOL +*/– 3267145or button *There is a tactile dot above N and to the right of VOL +. Using the hand strap While jogging, use the supplied hand strap. Put your hand between the recorder and the strap, and then hold the recorder as the illustrations below: The display window of the recorder ABCDE FG H Digital MEGA BASS LP2.4 IJKLMN A MONO (monaural) indication B LP mode indication C Mega bass indication D Disc indication Shows that the disc is rotating for recording, playing or editing an MD. E Level meter Shows the volume of the MD being played or recorded. F REC REMAIN/REMAIN (remaining time/tracks) indication Lights up along with the remaining time of the track, the remaining time of the MD, or the remaining number of tracks. G SYNC (synchro-recording) indication H REC indication Lights up while recording. When flashing, the recorder is in record standby mode. I Battery indication Shows approximate battery condition. J Time display K Disc name/track name indication Lights up when labeling a disc or a track. L Group indication Lights up when group mode is on. M Character information display Displays the disc and track names, error messages, track numbers, etc. N Play mode indication Shows play mode of the MD. Getting started! 1 Insert an alkaline dry battery. Lift up the buckle and the battery compartment lid to open. eE Insert an LR6 (SG) alkaline dry battery minus end first. Close the lid and the buckle. Using on a house current To a wall Connect the AC power adaptor. outlet It is preferable to use the recorder on house current when AC power recording for a long time. adaptor To DC IN 3V Battery life For details, refer to “Battery life” (page 48). (Unit: Approx. hours) LR6 (SG) alkaline dry battery Normal LP2 LP4 Recording 9 13 16 Playback 40 49 54 continued 2 Connect the headphones/ earphones and unlock the HOLD control. 1 Pull off the rubber cap that covers the i jack. 2 Connect the headphones/earphones to the i jack. 3 Slide the HOLD switch in the direction shown in the illustration below: 123HOLD to iConnect firmly. Headphones/earphones Recording an MD right away! (Synchro-recording) This section explains the basic procedure for making digital recordings using an optical cable connected to a CD player, Digital TV or other digital equipment. (For further information, see “System limitations” (page 52)) During synchro-recording, the recorder starts and stops recording in sync with the sound source. Track marks are added wherever they appear in the sound source. It is recommended to use the AC power adaptor when recording. To record from an analog source such as a cassette deck or a radio t “Recording in analog (Analog Recording)” (page 25). To record using group mode t “Recording tracks using the group function (Group Mode Recording)” (page 27). 1 Insert an MD. (Use a recordable MD for recording) Before you open the MD disc lid, open the buckle first. 1 Slide the OPEN switch to the direction 2 Insert an MD with the label side facing of the arrow shown in the illustration front, and press the lid down to close. below. Make sure to check the record- protect tab is closed. continued 3 Close the buckle. 2 Make connections. (Insert the cables firmly and completely into the appropriate jacks) CD player, MD Portable CD player, DVD to a wall player, etc. video player, etc. outlet Optical plug to LINE IN (OPTICAL) to DC IN 3V AC power adaptor Optical cable POC-15B*, etc. to a digital (Optical) out jack Optical mini-plug . See “Optional accessories” (page 64) 3 Record an MD. 1 While the recorder is stopped, press MENU. REC (x/N/./ >) X MENU/ENTER Menu items appear in the display. Control key 2 Press . or > repeatedly until “SYNC-R” flashes in the display, and END then press ENTER. SEARCH 3 Press . or > repeatedly until “ON” flashes in the display, and then press ENTER. 4 Press N while pressing REC. The recorder pauses and stands by for recording. 5 Play the source you want to record. The recorder starts recording automatically when it receives the playing sound. To stop recording, press x. After you press x to stop, the recorder will automatically turn off in about 10 seconds (when using the dry battery) or about 3 minutes (when using the AC power adaptor). To cancel synchro-recording Press . or > repeatedly until “OFF” flashes in the display in step 3, and then press ENTER. Note If you record on a previously recorded disc, the recorder is factory set to overwrite the ...