Stimmen - 0, Durchschnittliche Bewertung: 0
(
)
)
|
Anleitung Zusammenfassung
• In the pause/stop position, press 2; to start playback. .Playback starts with the selected track. Searching for a passage during playback 1 Press and hold . or § to find a particular passage in a backward or forward direction. .Searching starts while playback continues at low volume. After 2 seconds the search speeds up. 2 Release the button when you reach the desired passage. .Playback continues from this position. Selecting on MP3 CDs To find a MP3 track, you can first press 3 or 4 to select your desired album. Selecting an album •Hold down or press 3 or 4 repeatedly until you find the desired album number. •In the pause/stop position, press 2; to start playback. .The first track of the selected album plays. Helpful Hints: – When the program mode is active, use of the 3 or 4 keys are void. It is possible to play tracks in random order, to repeat a single track or the entire CD, and to play the first few seconds of each track. 1 Press MODE once or more during playback to activate one of the following. – : The current track plays repeatedly. – : All tracks of the disc/program play repeatedly. – : (for MP3 CDs only): All tracks of the current album play repeatedly. – : All tracks of the disc play in random order repeatly. – : All tracks of the disc play in random order once. – : (for MP3 CDs only): All tracks of the current album play in random order once. – : (for MP3 CDs only): All tracks of the current album play in random order repeatly. – scan: Each track in the disc plays 10 seconds in sequence. . For scan and random play, playback of selected mode starts with the next track. 2 To return to normal playback, press MODE repeatedly until the mode cursors disappear. PROGRAMMING TRACKS PROGRAMMING TRACKS You can select up to 64 tracks and store them in the memory in a desired Helpful Hints: sequence. You can store any track more than once. 1 Select a track with . or § and also 3 or 4 for a – During programming, if no action is executed within 10 seconds, programming will stop automatically. MP3 CD. – The program will also be cleared if the power supply is interrupted, or if the player lid is opened, or if the set switches off automatically. 2 Press PROG to store the track. . program lights up. P with the number of stored tracks is displayed. 3 Select and store all desired tracks in this way. 4 Press 2; to start playback of your programmed tracks. . program is shown and playback starts. 5 To add additional tracks to your program, press 9 to stop playing the program and continue with step 1 and 2. . After 64 tracks are stored, FL PrO9 is shown. Reviewing the program You can review the programme by pressing PROG for more than 3 seconds. . All stored tracks are displayed in sequence. Clearing the program 1 If necessary press 9 to stop playback. 2 Press 9 to clear the program. . cL PrO9 is displayed. RESUME / HOLD ESP, POWER SAVE MODE ESP, POWER SAVE MODE RESUME - continuing from where you have stopped You can store the last position played. When restarting, playback will continue from where you have stopped (RESUME). Use the OFF-RESUME-HOLD slider on the set for this function. 1 Switch the slider to RESUME during playback to activate RESUME. 2 Press 9 whenever you want to stop playback. 3 Press 2; whenever you want to resume playback .Playback continues from where you have stopped. •To deactivate RESUME, switch the slider to OFF. Helpful Hints: – For MP3-CD, as it contains large amount of compressed information, resume function will work only before the set is completely shut off. HOLD- locking all buttons You can lock the buttons of the set. When a key is pressed, no action will be executed. With HOLD activated, you can avoid accidental activation of other functions. • Switch the OFF-RESUME-HOLD slider to HOLD to activate HOLD . HOLd is displayed briefly. . All buttons are locked and no action will be executed when you press any button on the set. If the set is switched off, HOLd appears when 2; is pressed. •To deactivate HOLD, switch the slider to OFF . All the buttons are unlocked. TROUBLESHOOTING WARNING: Under no circumstances should you try to repair the set yourself as this will invalidate the warranty. If a fault occurs, first check the points listed before taking the unit for repair. If you are unable to solve a problem by following these hints, consult your dealer or service center. The CD player has no power, or playback does not start • Check that your batteries are not empty, that they are inserted correctly, that the contact pins are clean. •Your adapter connection may be loose. Connect it securely. The indication nO diSC or nO AF is displayed/CD cannot be read • Check that the CD is clean and correctly inserted (label-side upward). • If your lens have steamed up, wait a few minutes until the lens clear up. • CD-RW (CD-R) was not recorded properly. Use FINALIZE on your CD-recorder. The indication HOLd is on and/or there is no reaction to controls • If HOLD is activated, then deactivate it. • Ele...