Stimmen - 1, Durchschnittliche Bewertung: 5 ( )

Hersteller: Philips Dateigröße: 2.02 mb Dateiname: Unterrichtssprache:

Connect it securely. • For in-car use, check that the car ignition is on. Also check the player's batteries. The indication pls insert CD or No audio file is displayed • Check that the CD is clean and correctly inserted (label-side upward). • If your lens have steamed up, wait a few minutes until the lens clear up. • CD-RW (CD-R) was not recorded properly. Use FINALIZE on your CD-recorder. The indication Hold is on and/or there is no reaction to controls • If HOLD is activated, then deactivate it. • Electrostatic discharge. Disconnect power or remove batteries for a few seconds. Music files do not play • Check that the file names of MP3/WMA files end with .mp3 or .wma. TROUBLESHOOTING Some directories miss on MP3/WMA CDs • Check that the total number of files and albums on your MP3/WMA CDs does not exceed 350. • Only albums with MP3/WMA files are shown. The CD skips tracks • The CD is damaged or dirty. Replace or clean the CD. • Resume, shuffle or program is active. Switch off whichever is on. Music skips or popping sounds when you play a MP3/WMA track • Play the music file in your computer. If the problem remains, encode the audio track again and make a new CD. No sound or bad sound quality • Playback on pause. Press 2;. • Loose, wrong or dirty connections. Check and clean connections. • Volume might not be appropriately adjusted. Adjust the volume. • Strong magnetic fields. Check the player's position and connections. Also keep away from active mobile phones. • For in-car use. FM transmitter: check that the selected frequency (88.1, 88.3, 88.5 or 88.7MHz) of your car's FM radio is a non-broadcasting channel; your FM transmitter has been properly adjusted to match the selected frequency of your car's FM radio; the audio cable in your FM transmitter has been correctly plugged into the player. Voltage converter: check that the plug has been firmly connected to the player and the cigarette lighter jack is clean. HOLD, BEEP HOLD- locking all buttons This player offers a double lock function to prevent buttons from being accidentally pressed and activated. You can choose to lock all buttons on either your set, remote control or even both! Simply adjust the respective HOLD slider to HOLD on or off position as desired. For example: • Switch the OFF•RESUME•HOLD slider to HOLD to activate HOLD on the set. . 3 appears at hold. All buttons are locked and Hold is shown when you press any button on the set. If the set is switched off, Hold appears only when 2; is pressed. • To deactivate HOLD, switch the slider to OFF . All the buttons are unlocked. Helpful Hints: – If you deactivate HOLD by switching the slider on the set to RESUME, you will be activating the RESUME function. – If you have activated the HOLD command on the remote control, no Hold indication appears. Beep A beep confirms that you have pressed a button or that the batteries are empty. • Press DBB for more than 2 seconds to toggle between either beep on or off. .Beep appears if beep activated. .No Beep if beep deactivated. Helpful Hints: – Beep is on as the default setting. NOTES HEADPHONE / IN-CAR USE HEADPHONE HL351 • Connect the supplied headphones to the LINE OUT / p jack of the player. Helpful Hint: • LINE OUT/p can also be used to connect this set with your HiFi system. To adjust the sound and volume, use the controls on the connected audio equipment and the CD player. IMPORTANT! Hearing safety: Do not play your headphones at a high volume. Hearing experts advise that continuous use at a high volume can permanently damage your hearing. Traffic safety: Do not use headphones while driving a vehicle. It may create hazard and it is illegal in many countries. IN-CAR USE (connections supplied or optionally available) Put the set on a horizontal, vibration-free and stable surface. Make sure it is in a safe place, where the set is neither a danger nor an obstacle to the driver and passengers. To use the supplied AY3550 FM stereo transmitter, please refer to the instruction sheet by-packed with the transmitter. PLAYING A CD This CD player can play all kinds of Audio Discs (including CD-Recordables and CD-Rewritables) and MP3/WMA CDs. Do not try to play a CD-ROM, CDi, VCD, DVD or computer CDs. 1 Push the OPEN 2slider to open the player. 2 Insert an audio CD or a MP3/WMA CD, printed side up, by pressing the CD onto the hub. 3 Close the player by pressing the lid down. 4 Press 2;to switch the player on and start playback. . For an audio CD: the current track number, CDA-Track and elapsed playing time are displayed. For a MP/WMA CD: the filename scrolls, current album/track number and elapsed playing time are displayed. Helpful Hints: – Track type is indicated by the cursor 3 at WMA, MP3 and CD respectively. To pause playback • Press 2;. . The elapsed playing time flashes. • Press 2; again to continue playback. PLAYING A CD, VOLUME AND SOUND To stop playback • Press 9. . For an audio CD, the total number of tracks and the total playing time are displayed. For a...

Herunterladen

Geben Sie zwei Ziffern: