Stimmen - 0, Durchschnittliche Bewertung: 0 ( )

Hersteller: Philips Dateigröße: 953.29 kb Dateiname: Unterrichtssprache:

Source slide selectorFM / / : FM Select FM radio source Select music source repeat all mode Select music source shuffle* mode * In shuffle mode, SA018 plays the tracks in random order. Status indicators and their meanings Green LED light signals indicate: Status: fully charged (when connected to a computer) Confirmation: change of track / frequency / volume* (during press button action) Confirmation: play star ts (in music / radio mode) Status: turns on/off, batter y power level > 40 % Confirmation: FullSound™ deactivated (af ter simultaneous press and hold Vol and Vol action) Confirmation: change of folder / preset (after double press button action) Confirmation: - buttons unlocked (after lock slider action) - FullSound™ activated (af ter simultaneous press and hold Vol and Vol action) - return to first track (af ter press and hold action) Status: pause mode (af ter press action, until is pressed again) * Volume LED indicator extinguishes when the minimum / maximum volume level of SA018 is reached. English EN 7 Amber LED light signals indicate: Rejection: buttons locked (during press button action) Status: charging (when connected to a computer) Status: turns on/off, batter y power level 10 - 30 % Confirmation: buttons locked (after lock slider action) Aler t: Do not disconnect. Status: - synchronizing or updating (when connected to a computer) - searching radio stations (during first-time auto-tuning in FM radio mode) Red LED light signals indicate: Status: turns on/off, batter y power level < 10 % Aler t: very low batter y power, recharge required Mixed LED light signals indicate: Rejection: no audio file on device Error: software restoration required (for example in case of file corruption) Sound signals indicate: once Confirmation: turns on/off once every Aler t: ver y low battery power, 5 minutes rechage required Connect and charge Warning • Impor tant: SA018 uses the USB connection with the computer to update internal software. To prevent data loss and product malfunction, do not disconnect during the update process. SA018 has a built-in batter y that can be charged as follows: • through the combined headphone / USB jack of SA018, from a computer (with the supplied USB cable) • through the combined headphone / USB jack of SA018, directly from the power supply (with a charger, sold separately) Note • While SA018 is connected to a computer or power supply, all controls and functions are inactive. • SA018 remains in off-mode after charging process is completed. Connect the supplied USB cable 1 Connect the USB plug of the supplied USB cable to a spare USB por t on your computer. 2 Connect the special USB plug of the supplied USB cable to the combined headphone / USB jack on SA018. 3 Turn on your computer. » SA018 charges. Note • For first-time use, allow SA018 to charge for 3 hours. • While SA018 is connected to a computer, all controls and functions are inactive. • The amber charging LED changes to green when the charging process is completed. For more information on LED status indicators, see section Status indicators and their meanings. 8 EN Connect the earphones This is how to connect the supplied earphones: Install the Philips Device Manager software System requirements: • Windows® (2000, XP, Vista) • Pentium III 800 MHz processor or higher • 128 MB R AM • 500 MB hard disk space • Internet connection • Microsof t® Internet Explorer 6.0 or later • USB por t 1 Connect the mini USB plug of the supplied cable to SA018. 2 Connect the standard USB plug of the supplied cable to your computer. » A pop-up window appears on the computer. 3 From the pop-up window, select Install Philips Device Manager. 4 Follow the on-screen instructions to complete the installation of the Philips Device Manager. If the pop-up window fails to appear on the computer... 1 Select My Computer ( WindowsXP® / Windows2000®) / Computer (WindowsVista®). 2 Right click on Philips GoGear SA018. 3 Select Install Philips Device Manager. 4 Follow the on-screen instructions to complete the installation of the Philips Device Manager. Cannot find the file on SA018? 1 Ensure that your computer is connected to the Internet. 2 Select My Computer ( WindowsXP® / Windows2000®) / Computer (WindowsVista®). 3 Right click on Philips GoGear SA018. 4 Select Install Philips Device Manager from the Internet. 5 Follow the on-screen instructions to complete the installation of the Philips Device Manager from the Internet. Transfer music to SA018 SA018 appears as a USB mass storage device in Windows® Explorer.You can transfer and organize music files to SA018 through USB connection. 1 Click and highlight one or more songs to transfer between your computer and SA018. 2 Use drag and drop actions to complete the transfer. English EN 9 Tip • To transfer music CDs to the player: Rip(conver t) the songs on your music CDs to MP3/WMA files with software such as Windows® Media Player. Copy the files into SA018 with Windows® Explorer. Free versions of these programs can ...

Herunterladen

Geben Sie zwei Ziffern: