Stimmen - 0, Durchschnittliche Bewertung: 0
(
)
)
|
Anleitung Zusammenfassung
»»The play resumes at the previous volume level. When you have listened at a high volume level for 20 hours, Beep sounds and play stops. • To keep listening at a high volume level, press and hold . • To exit high volume, press any other buttons or wait until play resumes. EN »»The volume level drops below the high level (80 dBA) . Switch the random play on or off 1 During music play, press twice. »»You hear two beeps. The green indicator flashes twice at intervals. »»Songs play in random. 2 To switch off the random play, press twice again. »»You hear one beep. The green indicator flashes once at intervals. »»Songs play in sequence. EN 5 FM radio Note ••Plug in the supplied earphones when you tune in to radio stations. The earphones double as antenna. For better reception, move the earphone cable in different directions. Tune in to radio stations 1 Press and hold FM to switch from the music mode to FM radio mode. 2 To tune in to radio stations, press and hold / . EN 6 Update the firmware through Philips Device Manager Install Philips Device Manager 1 Connect MINIDOT/FITDOT to a PC. 2 On the PC, select My Computer (Windows XP / Windows 2000) / Computer (Windows Vista / Windows 7 / 8). 3 Right click on the Philips GoGear MINIDOT/FITDOT icon. Select Install Philips Device Manager. • Alternatively, click the Philips GoGear MINIDOT/FITDOT icon. Double-click the installer.exe. 4 Follow the onscreen instructions to complete the installation of the software. Note ••The installation requires you to agree to the license terms. Check for firmware updates 1 Make sure that you have connected your PC to the Internet. 2 Launch Philips Device Manager. »»A dialog box is displayed. 3 Connect MINIDOT/FITDOT to your PC. »»When the device is connected, "SA5DOTXX" is displayed on the text box. »»You can find current firmware version of the device. 4 To check for firmware updates, a Close the dialog box of Philips Device Manager. b At the base of the PC screen, right click and select Check for updates. »»Philips SA5DOTXX Device Manager checks for updates from the Internet. EN Update the firmware 1 When the firmware update is available, follow the onscreen instructions to download and install the firmware. 2 Disconnect MINIDOT/FITDOT from the PC. »»MINIDOT/FITDOT restarts after the firmware is updated and is ready for use again, EN 7 Troubleshooting If MINIDOT/FITDOT is not working properly or the display freezes, you can reset it without losing data: How do I reset MINIDOT/FITDOT? ••Insert a pen tip or other object into the reset hole on MINIDOT/FITDOT. Hold until the player shuts down. ••If the reset option is unsuccessful, recover MINIDOT/FITDOT through Philips Device Manager: 1 On your PC, launch Philips Device Manager. 2 Enter the recovery mode: a Switch off MINIDOT/FITDOT. b Press and hold the volume button , and then, connect MINIDOT/ FITDOT to your PC. c Keep holding the button until Philips Device Manager recognizes MINIDOT/FITDOT and enters the recovery mode. 3...
Dieses Handbuch ist für folgende Modelle:Player - SA5DOT02BF/12 (706.57 kb)
Player - SA5DOT02KF/12 (706.57 kb)
Player - SA5DOT02PF/12 (706.57 kb)
Player - SA5DOT02WF/12 (706.57 kb)