Stimmen - 4, Durchschnittliche Bewertung: 4.8
(
)
)
|
Anleitung Zusammenfassung
None of the buttons on your remote control will work. The on your yepp will work. Repeating Tracks/Section Press the “A - B” button of your remote controller to repeat the track or section that you selected. Setting 'Repeat Track' needs a minimum of two seconds of play time. 1 Press the A - B button of your remote control at the start point of the track or section that you want to repeat. Then, 'B' blinks on the display panel. 2 Press this button again at the end point of the track or section that you want to repeat. Note The section from point A to point B that you selected will automatically be repeated. To cancel this function, press the A- B button again. While tracks/sections are repeated, the FF and REW buttons do not work. Setting the Modes Each time the EQ/REP button of your remote controller pressed and held, the modes will REP, ALL, SHU and INT. REP mode : Repeats current track. ALL mode : Repeats all the tracks. SHU mode : Enables random playback. INT mode : Enables you to repeat the first 10 seconds of the tracks saved (for 10 seconds each). Using the Equalizer Each time the EQ/REP button of your remote controller is pressed, the equalizer modes will be changed in the order of Classic, Jazz, Rock and Normal. Normal mode is not indicated on the display. English 5 Connecting yepp’ to PC or Mac 1 Connect the USB cable to the USB 2 Turn the player on and connect the other to the download connector. (YP-NEU) (YP-NEP) Note Be sure to install the yepp’ Explorer before connecting your yepp’ to PC or Mac. When the message “ Add new hardware wizard” appears on the screen, click [Cancel] and then install the yepp’ explorer. Connecting yepp’ to PC or Mac 1 Connect the USB cable to the USB 2 Turn the player on and connect the other to the download connector. (YP-NEU) (YP-NEP) Note Be sure to install the yepp’ Explorer before connecting your yepp’ to PC or Mac. When the message “ Add new hardware wizard” appears on the screen, click [Cancel] and then install the yepp’ explorer. 6 Installing Software Insert the Installation CD into The picture below appears when 1 Click Click 2 Click the next button on each successive window. yepp’ explorer 1 Click Click 2 Click the next button on each successive window. Note Install the other program or download the files depending on your requirement. RealJukebox This software lets you listen to computer and enables you to encode MP3 Files. English 7 Installing Software 2000) If USB port error occurs after explorer in Windows 2000, do the following steps 1 Copy the secypusb. sys file from the installation 2 Paste the secypusb. sys into 'Drivers' from system32 folder in Windows 2000 (System Root Directory). (ex:/WinNT/system32/Drivers) Note Even though the secypub. sys file is present in the existing folder, be sure to run Change File. 3 Re-boot the computer. Installing Software on Mac Insert the Installation CD into the CD-ROM drive. 1 Execute the yepp’ explorer. - Double-click the yepp’ explorer icon. 2 Click...
Dieses Handbuch ist für folgende Modelle:Player - YP-NEP32B (773.81 kb)
Player - YP-NEU32B (773.81 kb)
Player - YP-NEU32CR (773.81 kb)
Player - YP-NEU64B (773.81 kb)