Stimmen - 1, Durchschnittliche Bewertung: 3
(
)
)
|
Anleitung Zusammenfassung
Setting Up a New User Deleting a User Using Fitness Manager [Calorie List] E possibile visualizzare i dati rilevati e salvati. -Data : Displays the data and time when a user takes exercise. -Exercise time : Displays the exercise in Hour and Minute. -Starting HR : Displays Heart rate(bmp) before exercise. -Final HR : Displays Heart rate(bmp) after exercise. -Calorie Data : Displays the calorie consumption(kcal). -Remark : Displays the contents that a user enters. [Calorie Chart] You can check the calories consumed as a result of exercise in units of years, months and days. : Displays calorie data for one year based on the current point. : Displays calorie data for one month based on the current point. : Displays calorie data by time as of today. [Biorhythm] You can check the biorhythm of the selected user. N NNNNo oooot tttte eeee If [Edit Profile] is clicked, personal information can be changed. The resulting graph of the biorhythm reflects the statistical values of the measured data and so may be different from the actual values. Refer to Help for more detailed information about using yepp Studio. Playing Music and Turning Off the Device Adjusting the Volume/Hold Function Adjusting the VolumeTurning Power On and Off Power On : Press and hold the button to turn on the power. Press and hold the Press the 001 Track 1 Nor07:32 NOR 00:01:30 A M sports , HOLD Function Press the buttons to adjust the volume. Power Off : Press and hold the button to turn off the power. Playing Music N NNNNo oooot tttte eeee 001 Nor07:32 NOR A M 00:01:30 30 The volume can be adjusted in increments between 0 and 40. Press the button. buttons once to adjust the volume by one step. Playback starts. , buttons to increase or decrease the volume in greater increments. 001 Track 1 Nor07:32 NOR 00:01:30 A M GOOD BYE Pausing Music In Hold mode, all buttons are disabled. button again to resume playback. While in Pause mode, briefly press the Press the button to pause playback. Slide the switch on the player in the direction of the arrow. When the button is pressed, N NNNNo oooot tttte eeee the “ HOLD!” message will appear on WMA files can be played only as music files with a compression rate of 64Kbps-192Kbps, the display. HOLD! that can be created in Windows Media Player (Version 8.0). The power off time can be set in the menu. 34 35 Searching for Music/Voice Files Encoding MP3s 1 1 Connect the Audio Output port on the external audio source To search for specific parts during play (or the Line Out port) to the ENC port on the device with the Line in cable. NNNNooootttteeee VBR(Variable Bit Rate) file: A file that constantly changes the compression rate according to the type of sounds, such as their pitch, in the file. With VBR files, pressing the button within 5 seconds from the start of the track may not result in the previous track playing. Files that were downloaded in MP2 or MP1 and had their file extension changed to MP3 may not play. A desired passage can be searched for by pressing and holding down the , buttons during play. If the button is pressed during play, the next track is played. If the button is pressed before five seconds have passed since starting to play a track, the previous track is played and if the button is pressed after five seconds, the current track is replayed from the beginning. To change tracks during play If the , buttons are pressed when stopped, the yepp moves to the previous or next track, respectively. To change tracks when stopped 2 If the ENC button is pressed, MP3 encoding begins. If the button is pressed, encoding is paused and if the button is pressed again, the encoding resumes. If the ENC button is pressed during encoding, the encoding stops and an encoding file is created. Encoding is performed in order (ENC001, ENC002, etc.) and files are saved in the MP3 format after encoding. 3 NNNooottteee The bit rate can be set to 64Kbps, 96Kbps and 128Kbps. During encoding, there is no beeping sound and the button lights and backlight do not illuminate. CCCCaaaauuuuttttiiiioooonnnn Do not disconnect the Line cable during Encoding. If the battery is not sufficiently charged, encoding will not be done. Adjust the volume of the external audio source to a suitable level and encode it. If the volume level is extremely high, the sound quality may not be good. 36 37 Listening to FM Radio Select FM mode first. (Refer to “Changing Modes”) FM Scan 07:32A M 91.90MHz FMCH — — 07:32A M 91.90MHz Press the , buttons to search manually for the desired frequency. Press and hold the , buttons in order to search for and stop at frequencies with reception. Manual Search for a Frequency Automatic Search for a Frequency Encoding From FM Radio Doing FM encoding 1 1 Press the ENC button during FM reception. Encoding of the currently transmitted FM broadcast begins. 2 Press the ENC button again. A file is created and the encoding stops. Files are saved in order, starting FM001, FM002...etc., and sto...
Dieses Handbuch ist für folgende Modelle:Player - YP-60H (2.27 mb)
Player - YP-60HW (2.27 mb)
Player - YP-60V/XAP (2.27 mb)
Player - YP-60X (2.27 mb)