Stimmen - 3, Durchschnittliche Bewertung: 4
(
)
)
|
Anleitung Zusammenfassung
NoteNote Using the battery pack Open the cover of the battery 1 compartment. 2 2 Carefully check the correct orientation of the positive and negative terminals of the battery. Replace the cover. Use two AA type 1.5 V batteries. 3 3 Slide the battery pack into the groove and insert into the battery pack connection port on the rear of the unit. Turn LOCK knob to secure battery4 pack tightly in position. CD Playback MP3-CD Playback This product is an MP3-CD and audio CD player. It cannot record/save mp3 files. 1 1 Push the OPEN button to Push the OPEN button to open the door. Insert a CD. open the door, and insert 1 an MP3-CD. Push the door to close it. Push the door to close it. 2 2 Press the Play/Pause Press the Play/Pause ( ) button. ( ) button. 2 Once the CD is recog The inserted MP3-CD will nised, playback combe scanned for about 30~90 mences. seconds. Playback will then commence. Your CD Player will take a few moments Track Number Indicator Playtime Indicator to scan through all the tracks recorded on a particular MP3-CD. 3 3 To stop playback, press the Stop ( ) button. 3 3 To stop playback, press the Stop ( ) button. Track number or album number indication Track number:Indicator stops for a moment, and then moves to the left hand side. Album number: Indicator will move from the right to the left. To temporarily pause playback for a moment 13 Press the Play/Pause ( ) button. Playback will be temporarily suspended. Press the Play/Pause ( ) button again to resume playback. NoteNote . For CD-RW discs, the data written in high speed may not be read properly or the data may not be read properly in accordance with the writing format. In such instances, please try to write the data again. . When the OPEN switch is slided to open the door, playback of the CD will stop. Features Skip Repeat Function Press and release the or button during playback of a CD. Press the button to play the next track. Press the button to go back the current track of the beginning. (Briefly press the button twice to repeat the previous track.) Press the button while the unit is in “stop” (no playback) mode. Track 2 will be played back. Press the button to play back the previous song. Press the Repeat/Random button. . Each time the button is pressed, REP1 and REP ALL are selected alternately. . If you want to playback the current track again, select REP1. If you want to repeat playback of all songs, select REP ALL. Search Random Function 15 16 Press the or button and keep depressed during playback of a CD. Press (and keep depressed) the or button. The CD will playback in fast forward or fast reverse mode. Release the button to return to nor To skip through 10 trac Press the +10 button briefly while pla the current one will then be pla example) If you want to select track 43 dur times, and then press the Press the Repeat/Random button and keep depressed. All tracks will be played back in random order. To cancel this function, press the ) button. Normally use the +10 button to select move the 10 tracks when MP3-CD is at “Album OFF” Mode. Features SBS Function Last Memory Function Press the SBS button. . The SBS function will enable you to maximise your listening enjoyment with dynamic reproduction of low- pitched sounds such as beating drums or galloping horses. . Each time the SBS button is pressed, SBS will be turned on and off alternately. ESP Function Press the ESP button. . CD Playback: Press the ESP button to turn this function on and off. (During playback of an MP3-CD, ESP will always be active whether or not the ESP button is pressed.) . CD playback will operate normally even during vibrations or shocks. . Playbacks may be processed by ESP function with the battery and this function is automatically released when the voltage drops (below 1.7V) . This function is only available during playback of a MP3-CD When MP3-CD playback is selected again after your CD player has been stopped or turned off, this function allows playback from the start of the track that you last listened to. . To cancel this function, press the button. When the HOLD switch is selected . Any other button pressed while during CD playback will not function. (on the display, the “HOLD” indicator will flash.) . Use the HOLD function when carrying your CD Player around with you, in your bag. Use of this function will allow you to conserve battery life as it prevents the CD Player from being turned on unintentionally if a button is pressed inadvertently. Features NoteNote This function is only available during playback of an MP3-CD Selection and playback of MP3-CD tracks is fast by the unit of album(directory). Album Function Main Unit Press the Album button for a short time. It moves to the next album. example) By pressing the Album button for a short time during Kevin02.mp3 being played, playback of Summer05.mp3 that is the 1st track of the 2nd album will begin. Songs stored in the ALBUM Main Unit Display When it is ‘ALBUM ON’ When it is ‘OFF’ Track Num....
Dieses Handbuch ist für folgende Modelle:Player - MCD-MP65 (565.78 kb)