Stimmen - 5, Durchschnittliche Bewertung: 3.8 ( )

Hersteller: Emerson Dateigröße: 754.86 kb Dateiname: Unterrichtssprache:

PAUSE CONTROL To pause momentarily during playback press the PLAY/PAUSE button again. The elapsed time display flashes. The sound stops but the disc continues to spin. Press the PLAY/PAUSE button once more to cancel Pause mode and resume normal playback. The elapsed time display stops flashing. SKIP/SEARCH CONTROLS Press the SKIP FWD or SKIP REV buttons repeatedly during playback to skip to higher or lower numbered tracks. Playback will begin on the selected track. To search within a track at high speed to locate a specific musical passage depress and hold either the SKIP FWD or SKIP REV controls. The player will search rapidly forward or backward as long as the buttons are depressed. The volume is automatically muted during high speed search. Watch the elapsed time display. When the time display reaches the desired point, release the buttons. Normal playback will resume at that point and the volume returns to normal level. 12 HD8100_031604.p65 12 16/3/2004, 11:56 PLAY MODE BUTTON Pressing the MODE button during playback cycles the player through the following four special playback modes: (Repeat 1 Track) ALL (Repeat All Tracks) INTRO SHUFF (Shuffle) Playback. REPEAT PLAYBACK The player can be programmed to continuously repeat a single track or the entire disc automatically. One Track Repeat During playback press the SKIP FWD or SKIP REV buttons to select the track to be repeated, then press the MODE button once. The indicator appears in the display and the selected track will be repeated continuously. Press the STOP button to cancel Repeat 1 playback. All Tracks Repeat Press the PLAY/PAUSE button to begin playback, then press the MODE button twice. The ALL indicator will appear in the display and the entire disc will be repeated continuously. Press the STOP button to cancel All Track Repeat playback. 13 HD8100_031604.p65 13 16/3/2004, 11:56 INTRO (Intro Scan) PLAYBACK The Intro Scan feature plays only the first 10 seconds of each track on the disc. This feature is useful when you are trying to find a particular song but you cannot remember the title. 1.) Load your disc in the player as usual and press the PLAY/PAUSE button to begin playback. 2.) When playback begins press the MODE button 3 times. The INTRO indicator flashes. 3.) Press the PLAY/PAUSE button once more. The INTRO indicator stops flashing and remains ‘On’. The player backs up to the beginning of track 1, plays the first 10 seconds of each track on the disc, and then stops. To cancel Intro Scan playback press the STOP button. SHUFFLE (Random) PLAYBACK When Shuffle playback is selected all the tracks on the disc will be played back in random order. 1.) Load your disc in the player as usual and press the PLAY/PAUSE button to begin playback. 2.) When playback begins press the MODE button 4 times. The SHUFF indicator flashes. 3.) Press the PLAY/PAUSE button once more. The SHUFF indicator stops flashing and remains ‘On’. The player randomly selects a track for playback. After each track has played once the player stops. To cancel Shuffle playback press the STOP button. 14 HD8100_031604.p65 14 16/3/2004, 11:56 PROGRAMMED PLAYBACK You can program up to 20 tracks on a disc to play in any desired order. NOTE: You can program a disc either during playback or in Stop mode. 1.) Press the PROG button once. The PROG indicator and the Program Number ‘01’ appear, and the track number ‘00’ flashes. 2.) Press the SKIP FWD or SKIP REV button to select the first track to be programmed. Example: Track 2. 3.) When the desired track number is flashing in the display press the PROG button again to enter the desired track number in Program Number 1. The track number returns to “00” and the Program Number advances to “02”. 4.) Repeat Steps 2 and 3 to program additional tracks up to a maximum of 20. 5.) Press the PLAY/PAUSE button to begin programmed playback. The PROG indicator remains in the display and the track display stops flashing. • Playback begins with the first track you programmed and continues until all programmed tracks have been played, and then the player stops. The programmed sequence will remain in the memory until the power shuts off (approximately 30 seconds) or until the CD door is opened. • If you press the PROG and PLAY/PAUSE buttons again before the power shuts off the programmed sequence will play again. 15 HD8100_031604.p65 15 16/3/2004, 11:56 CARE AND MAINTENANCE CARE AND MAINTENANCE CLEANING THE CABINET Wipe with a soft cloth. If the cabinet is very dirty, dampen the cloth with a weak solution of neutral detergent and water, and then wipe clean. CLEANING THE LENS A dirty lens will cause sound skipping and, if the lens is very dirty, the CD may not work. Open the disc cover and clean the lens as follows: DUST OR DRY PARTICLES Using a camera lens brush/blower, blow on the lens several times, then wipe it lightly with the brush to remove dust. Then, blow on the lens once more. FINGERPRINTS To remove fingerprints from the lens, use a cotton swab st...

Herunterladen

Geben Sie zwei Ziffern: