Stimmen - 5, Durchschnittliche Bewertung: 4
(
)
)
|
Anleitung Zusammenfassung
The tone sounds when the setting is changed. EQ MODE MEMORY To turn the tone on S-XBS To turn the tone off . The display light The light in the remote control’s display comes on for about 5 seconds when you press a button, unless the hold function is on. To check the current display Change the position of the hold switch. The light comes on for about 5 seconds. This unit includes a mechanism that extends the life of the batteries by varying the rotation rate of the motor. Motor noise may increase when the rate changes. If the noise bothers you Use the AC adaptor to power the unit. The rotation rate does not change while you are using the AC adaptor. S-XBS Anti-Skip System This system deals with skipping in a variety of ways: .The thinner and lighter construction makes the unit less susceptible to vibration. .An anti-skip mechanism prevents skipping caused when play speed changes due to swinging of the unit. .A recovery system immediately returns the laser pickup to its original position if it is knocked off the track by a strong shock. .An anti-skip memory (max.48 seconds) fills in interruptions caused by bumps and vibrations. The anti-skip system works automatically while the system is on and cannot be canceled. Note! .The anti-skip memory compresses digital signals. .While the system is on, the disc rotates at a higher When bumps continue repeatedly rate than usual in collecting extra audio data. This The elapsed playing time disappears and sound is inter- could result in a slight increase in disc rotation noise. rupted. S-XBS 5 RQT6154 Other Play Methods The letters such as A in the illustrations refer to the descriptions in the “Location of Controls” section (See page 3.). Skip play Program play Repeat play/Random play The disc plays from the selected track through to the last track, then play stops automatically. Preparation: Put unit in stop mode. 1 Select the desired track. Main unit Main unitMain unit G Remote controlRemote control A EQ MODE MEMORY (Beep Beep Beep) (Beep Beep) Main unit Main unitMain unit E Remote controlRemote control C EQ MODE MEMORY (Beep) Changing the sound quality Remote control onlyRemote control only Press during play or stop mode. G (Beep) EQ MODE MEMORY The setting switches as shown below each time you press the button. S-XBS>TRAIN>LIVE>Cancel (no indicator is shown) ^ -------------------------------------------------------------} S-XBS: Select this setting to boost the low frequency range response. TRAIN: Select this setting to avoid annoying other passengers with noise from your stereo earphones while riding on the train, or to reduce fatigue when listening for a long period of time. LIVE: Select this setting for a live concert effect. Note! The setting returns to S-XBS when you disconnect the power source. Up to 24 tracks can be entered in the program. Preparation: Put unit in stop mode. 1 Select the desired track. Main unit Main unitMain unit G Remote controlRemote control A EQ MODE MEMORY (Beep Beep Beep) (Beep Beep) 2 Register in sequence. (The indication “M” and the programmed sequence appear on the display.) Remote control onlyRemote control only I (Beep) EQ MODE MEMORY 3 Repeat steps 1 and 2 to program all the desired tracks. 4 Main unit Main unitMain unit E Remote controlRemote control C EQ MODE MEMORY (Beep) . To program the same track in the sequence more than once After step 2, press [MEMORY] (remote control) the desired number of times. . If “'” is displayed No more tracks may be programmed. . To confirm the contents of the program Press [MEMORY] (remote control) while the disc is playing. (The numbers of the programmed tracks appear on the display in sequence. The display stays lit as long as the tracks continue to be displayed.) . To delete the entire program Press [.] (main unit) or [1/.] (remote control). Note! The repeat and random play modes are canceled after steps 1 and 2. Remote control onlyRemote control only Press during play or stop mode. H (Beep) EQ MODE MEMORY The setting switches as shown below each time you press the button. 1-track repeat (1 `)( ----------------] One track is repeated. | v| All-track repeat (`) | All the tracks on the disc are repeated. | v| Random (RANDOM) | The tracks play once each in random | order and then play stops. | v| Random repeat (` RANDOM) | The tracks play repeatedly in random | order. | v| Cancel (no indicator is shown) --------------} When pressed during program play The setting switches as shown below each time you press the button. 1-track repeat (1 ` M)(------------] One track is repeated. | v| Memory repeat (` M) | The programmed tracks are repeated. | v| Cancel (M) -------------------------------------------} Note! .You can select the first track to play in random play and random repeat play by pressing [9] while the disc is stopped. All the tracks are played. .You cannot select random play or random repeat play during program play. .The resume function does not work when random or random repeat are on. .W...