Stimmen - 3, Durchschnittliche Bewertung: 4.3 ( )

Hersteller: JVC Dateigröße: 534.51 kb Dateiname: Unterrichtssprache:

. Next song / fast forward (press and hold) 4 Previous song (Press this button during playback to jump back to the beginning of the track.) / fast rewind (press and hold) Charging the iPod The iPod is charged while it is set on the unit when the Unit power is on. • Connect the AC adapter to the Unit. The iPod battery is not charged while the Unit is operated on the battery power supply. • The iPod is charged regardless of the sound source selected on the Unit. • See the iPod instruction manual about charging times. NOTES • This unit can only play the iPod audio. You can use the iPod video function and hear the audio but cannot play the video. • Do not carry the System with iPod connected. You might drop it down or it might cause damages to the connector part. • Do not touch or hit the iPod terminal pins or the connector pins directly. It might cause damages to the connector part. • If the iPod does not play correctly, please update your iPod software to the latest version. - For details about updating your iPod, check on the Apple web site <• iPod is a trademark of Apple Inc., registered in the U.S. and other countries. • iPhone is a trademark of Apple Inc. • JVC is not responsible for any loss of or damage to iPod that might result from the use of this product. • Sound distortion may occur when playing back audio sources with high recording levels. When distortion occurs, it is recommended to turn off the equalizer of the iPod. For information on operating the iPod, see the iPod instruction manual. • If you do not turn on the power of this unit and only connect the iPod to this unit, power may be supplied to the iPod. • “Made for iPod” means that an electronic accessory has been designed to connect specifically to iPod and has been certified by the developer to meet Apple performance standards. • “Works with iPhone” means that an electronic accessory has been designed to connect specifically to iPhone and has been certified by the developer to meet Apple performance standards. • Apple is not responsible for the operation of this device or its compliance with safety and regulatory standards. 4 / . Listening to FM radio Stretch out the wire antenna located on the rear of the unit before using. 1 Turn the Unit power on. 2 Select “FM” with the SOURCE button. 3 Select a frequency with the 4 / . button. NOTES • Press and hold 4 / . button to search broadcast stations automatically. The search is finished when the signal is received. Press again while searching to quit search. • When there is too noisy in an FM stereo broadcast, you can reduce the noise by switching to monaural reception. Press again to switch back to stereo reception. Presetting Stations 4 / . 3/8 1 Select “FM” with the SOURCE button. 2 Push the TUNER PRESET - + button to select the desired channel number (P01 to P20) to be registered. 3 While the desired channel number is displayed, press and hold the 3/8 button. > The channel number starts flashing. 4 While the channel number is flashing, use the 4 / . button to select the frequency (87.50 MHz to 108.00 MHz) of the station that you wish to register. 5 Press the 3/8 button > The selected frequency will be registered. • To confirm registration, push the TUNER PRESET -+ to select the registered channel number (P01 to P20), and press 3/8 button to display frequency. 6 After presetting the station, you can easily select the channel with TUNER PRESET . +. 3 6. How to set the TIMER Setting the alarm (ALARM-BUZZER) 1 Press the SET button to select “ALARM 1” or “ALARM 2”. > The selected icon starts lighting. 2 Press and hold the SET button. > “ON” or “OFF” and starts flashing. 3 Use the DOWN/UP button to select “ON” and press the SET button. > starts lighting and the time display starts flashing. • When “OFF” is selected, goes off and the alarm setting is disabled. The display returns to the current time. • To separate “ALARM 1” and “ALARM 2”, set to on/off for each. 4 While flashing, set each item with the DOWN/UP button. • When the SET button is pressed, the flashing items will change in the following order. Hour > Min. > TIMER PLAY time (10 to 30) > time display • It is not necessary to set the “TIMER PLAY” time at this point. 5 Switch the ALARM switch to “BUZZER”. • of the set alarm starts lighting on the display. • To check the set time, switch the display to alarm time (ALARM 1/ALARM 2) by pressing the SET button. • The buzzer sounds for three minutes. • If the set time of “ALARM1” laps over that of ”ALARM2”, the buzzer of the earlier set alarm stops when the latter one starts sounding. Selecting iPod or FM radio for the alarm sound (ALARM-TIMER PLAY) 1 Set the alarm time. (See steps 1 to 4 of “To set the alarm (ALARM-BUZZER)”) Hour > Min. > TIMER PLAY time (10 to 30) > time display • You can set the duration of time between timer-on and timer-off from 10 minutes to 30 minutes in TIMER PLAY time. 2 If the power is off, turn the unit power on. 3 Confirm that you can hear the...

Herunterladen

Geben Sie zwei Ziffern: