Stimmen - 3, Durchschnittliche Bewertung: 3.3 ( )

Hersteller: Sennheiser Dateigröße: 802.51 kb Dateiname: Unterrichtssprache:

No. 44740) HMEC 302, HMEC 305 and HMEC 306 headsets • Headset • Padded carry and storage bag with shoulder strap • Wind screen for microphone • MZQ 2002-1 Cable clip (Cat. No. 44740) Recommended accessories Replaceable gel ear cushions (Cat. No. 83140) BP-03 battery pack (except for HMEC 302, HMEC 305 and HMEC 306) Battery pack with XLR-3 socket for powering the NoiseGard™ electronics HMEC 305-C, HMEC 322, HMEC 400 and HMDC 322 headsets. Four alkaline manganese batteries (IEC LR 6) ensure approx. 15 hours of (batteries are not included in the delivery). Length of connecting Adapter cables (except for HMEC 302, HMEC 305 and HMEC Sennheiser offers special adapter cables for connecting HMEC 300, HMEC 305-C, HMEC 322, HMEC 400 and to the onboard power supply via the cigarette lighter socket: ACX-1 ACX-2 • ACX-1 adapter cable for powering one headset via the • ACX-2 adapter cable for powering two headsets The adapter cables are also available and a green LED operation indicator: • ACX-11 adapter cable for powering one ACX-11 ACX-22 • ACX-22 adapter cable for powering 120 Connecting the headsets Connecting cables for headsets HMEC 300 and HMEC 400 headsets: 1 1/4” (6.35 mm) stereo jack plug for connecting the headphones 1 PJ-068 jack plug for connecting the microphone 1 XLR-3 plug for connecting the power supply for the NoiseGard™ electronics HMEC 302 headset: 1 /4” (6.35 mm) stereo jack plug for connecting the headphones 1 PJ-068 jack plug for connecting the microphone and the power supply for the NoiseGard™ electronics HMEC 305 headset: 1 XLR-5 plug for connecting the headphones, the microphone and the power supply for the NoiseGard™ electronics Connecting cable for HMEC 302 Connecting cable for HMEC 300 and HMEC 400 Connecting cable for HMEC 305 121 Connecting cable for HMEC 322 and HMDC 322 HMEC 305-C headset: 1 XLR-5 plug for connecting the headphones and the microphone 1 XLR-3 plug for connecting the power supply for the NoiseGard™ electronics HMEC 306 headset: 1 6-pin Redel plug for connecting the headphones, the microphone and the power supply for the NoiseGard™ electronics HMEC 322 and HMDC 322 headsets: 1 U-174/U jack plug for connecting the headphones and the microphone 1 XLR-3 plug for connecting the power supply for the NoiseGard™ electronics Connecting cable for HMEC 306 Connecting cable for HMEC 305-C Powering option s There are three options for powering the NoiseGard™ active noise compensation: 1. Connection to the on-board system (12–35 V DC) 2. Connection to the BP-03 battery pack (accessory, except for HMEC 302, HMEC 305 and HMEC 306) 3. Connection to the cigarette ligther socket (12–35 V DC) via adapter cable (accessory, except for HMEC 302, HMEC 305 and HMEC 306) The supply voltage for the NoiseGard™ system is processed by the connecting cable. Power supply for NoiseGard™ Ground Do not connect! XLR-3 socket for HMEC 300, HMEC 305-C, HMEC 322, HMEC 400 and HMDC 322 headsets 1. Connecting the headset to the on-board system The NoiseGard™ electronics can be connected to on-board power supply systems operating voltages between 12–35 V DC. Danger of short circuit! Before turning on NoiseGard™, ensure that the on-board power supply protected by a 1 A fuse. The HMEC 300, HMEC 305-C, HMEC 322, HMEC 400 and HMD...

Herunterladen

Geben Sie zwei Ziffern: