Stimmen - 3, Durchschnittliche Bewertung: 3 ( )

Hersteller: Sony Dateigröße: 658.6 kb Dateiname: Unterrichtssprache:

Fotos und technische Daten  Sony  CFD-S47L

VOL– VOL+ PRESET+ BAND PRESET– TUNE – TUNE + VOL– VOL+ PRESET+ BAND PRESET– TUNE – TUNE + To record from the radio, tune in the station you want (see page 6). 10EN Basic Operations Press rto start recording ((is depressed automatically). 3 REC Basic Operations Tips • Adjusting the volume or the audio emphasis (see page 27) will not affect the recording level. • If the AM or MW/LW program makes a whistling sound after you've pressed rin step 3, press MONO/ST ISS•PLAY MODE (Interference Suppress switch) repeatedly until the noise is at a minimum. • For the best results, use the AC power as a power source. • To erase a recording, proceed as follows: 1 Insert the tape whose recording you want to erase. 2 Press FUNCTION to select “TAPE”. 3 Press r. Use these buttons for additional operations FUNCTION MONO/ST ISS PLAY MODE P p6 OPERATE (or POWER) To Press stop recording p6 pause recording P Press the button again to resume recording. turn on/off the player OPERATE (or POWER, see page 2) 11EN Basic Operations The CD Player Using the display Checking the total track number and playing time Check the display in stop mode. If the CD has more than 12 tracks, “OVER 12” appears DISPLAY ENTER MEM You can check information about the CD using the display. in the display. Total playing time Total track number Music calendar Checking the remaining time Press DISPLAY•ENTER MEM while playing a CD. The track numbers in the music calendar disappear after they are played. To display Press DISPLAY•ENTER MEM the current track number once and the remaining time on the current track* the number of tracks left twice and remaining time on the CD the current track number three times and playing time * For a track whose number is more than 20, the remaining time appears as “– –:– –”. 12EN The CD Player Locating a specific point in a track You can quickly find a specific point in a track while playing a CD. You can also locate any track using the number buttons on the remote (CFD-S47/S47L only). The CD + = Note CFD-S47/S47L only: You cannot locate a specific track if “SHUF” or “PGM” is lit in the display. Turn off the indication by pressing p. Tip CFD-S47/S47L only: When you locate a track numbered over 10, press >10 first, then the corresponding number buttons. Example: To play track number 23, press >10 first, then 2 and 3. To locate Press a point while listening to +(forward) or = the sound (backward) while playing and hold down until you find the point a point while observing +(forward) or = the display (backward) in pause and hold down until you find the point a specific track directly the number button of the (CFD-S47/S47L only) track on the remote 13EN The CD Player Playing tracks repeatedly (Repeat Play) You can play tracks repeatedly in normal, shuffle or program play modes (see page 16). On the remote (CFD-S47/S47L only) 1 Press p. 2 Press MODE until the repeat mode you want appears in the display. 3 Do either of the following to start repeat play: •When you’ve selected “REP 1”, select the track by pressing the number button. •When you’ve selected “REP ALL” or “SHUF REP”, press (. •When you’ve selected “PGM REP”, program tracks (see step 3 on page 16), then press (. = ^ + p MONO/ST ISS PLAY MODE 1 Press p. “Cd” appears in the display. 2 Proceed as follows. To repeat Do this a single track 1 Press MONO/ST ISS• PLAY MODE until “REP 1” appears. 2 Press =or +to select the track that you want to repeat. 3 Press ^. all the tracks 1 Press MONO/ST ISS• PLAY MODE until “REP ALL” appears. 2 Press ^. tracks in random order 1 Press MONO/ST ISS• PLAY MODE until “SHUF REP” appears. 2 Press ^. programmed tracks 1 Press MONO/ST ISS• PLAY MODE until “PGM REP” appears. 2 Program tracks (see step 3 on page 16). 3 Press ^. To cancel Repeat Play Press MONO/ST ISS•PLAY MODE until “REP” disappears from the display. 14EN The CD Player Playing tracks in random order (Shuffle Play) ^ p You can play tracks in random order. The CD On the remote (CFD-S47/S47L only) 1 Press p. 2 Press MODE repeatedly until “SHUF” appears in the display. 3 Press (. MONO/ST ISS PLAY MODE 1 Press p. “Cd” appears in the display. 2 Press MONO/ST ISS•PLAY MODE until “SHUF” appears in the display. 3 Press ^to start shuffle play. To cancel Shuffle Play Press MONO/ST ISS•PLAY MODE until “SHUF” disappears from the display. 15EN The CD Player Creating your own program (Program Play) You can arrange the playing order of up to 20 tracks on a CD. On the remote (CFD-S47/S47L only) 1 Press p. 2 Press MODE until “PGM” appears in the display. 3 Press the number buttons for the tracks you want to program in the order you want. 4 Press (. = ^ + p DISPLAY ENTER MEM MONO/ST ISS PLAY MODE 1 Press p. “Cd” appears in the display. 2 Press MONO/ST ISS•PLAY MODE until “PGM” appears in the display. 3 Press the =or +then press DISPLAY• ENTER MEM for the tracks you want to program in the order you want. Programed track Playing order The programed tracks appear in the music calender. 4 Press ^to start prog...

Herunterladen

Geben Sie zwei Ziffern: