Stimmen - 4, Durchschnittliche Bewertung: 3.3 ( )

Hersteller: Sony Dateigröße: 167.84 kb Dateiname: Unterrichtssprache:

Fotos und technische Daten  Sony  CFD-V31L

The REC z button does not the player to prevent possible 2 Set FUNCTION to TAPE•CD/RADIO OFF. function or the tape does not play • The player is not disconnected damage from the magnet. 3 Press z. or record. from the AC power source (mains) as long as it is connected cassette is in place. • Make sure the safety tab on the to the wall outlet, even if the player itself has been turned off. 3 Set FUNCTION to CD. 1 Press Z PUSH OPEN/CLOSE down to open the CD compartment and place a CD in the CD compartment. 1 CFD-V21L/V27L/V31L/V177L/V77S: Set FUNCTION to RADIO. CFD-V27/V177: Set FUNCTION to FM or AM and proceed to step 3. 2 CFD-V21L/V27L/V31L/V177L/V77S: Select the band. To adjust the volume turn off the radio To improve broadcast reception Reorient the antenna for FM. Reorient the player itself for AM, MW or LW. For SW, extend the antenna vertically. Tips • To listen through headphones, connect the headphones to the i (headphones) jack. • For best results, place the player away from a TV. • CFD-V21L/V27L/V31L/V177L/V77S only To receive FM stereo program: Set the FM MODE selector at the rear to STEREO. If the FM broadcast is noisy, set the selector to MONO and the radio will play in monaural. 2 Close the CD compartment. With the labeled side up 4 Press u . The player plays all the tracks once. Track number Playing time To adjust the volume stop playback pause playback go to the next track go back to the previous track remove the CD turn off the player locate a point while listening to the sound locate a point while observing the display Using the display Checking the total track number and playing time Check the display in stop mode. Checking the remaining time Press DISPLAY•ENTER while playing a CD. To display remaining time on the current track* remaining time on the CD and the number of tracks left playing time and the current track number * For a track whose number is more than 20, the remaining time appears as “- -:- -” in the display. Repeat Play 1 Set FUNCTION to CD. 2 Proceed as follows: To repeat a single track all the tracks tracks in random order programmed tracks To cancel Repeat Play Press PLAY MODE until “REP” disappears from the display. Shuffle Play 1 Set FUNCTION to CD. 2 Press PLAY MODE until “SHUF” appears in the display. 3 Press u to start Shuffle Play. To cancel Shuffle Play Press PLAY MODE until “SHUF” disappears from the display. Total playing time Total track number Program Play 1 Set FUNCTION to CD. 2 Press PLAY MODE until “PGM” appears in the display. 3 Press . or > then press DISPLAY•ENTER for the tracks you want to program in the order you want. 4 Press u to start Program Play. To cancel Program Play Press PLAY MODE until “PGM” disappears from the display. To change the current program Press x once if the CD is stopped and twice if the CD is playing. The current program will be erased. Then create a new program following the programming procedure. Tips • You can play the same program again, since the program i...

Herunterladen

Geben Sie zwei Ziffern: